2015-12-13 22:21:02 +01:00
|
|
|
|
Getting Started with WCAT
|
|
|
|
|
|
======================================
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
|
|
|
|
|
|
It is suggested that you read the documentation for WCAT in order to understand
|
|
|
|
|
|
the environment and configuration needed. Documentation can be found under the
|
|
|
|
|
|
doc folder in the directory that you installed WCAT to.
|
|
|
|
|
|
|
|
|
|
|
|
Installing WCAT
|
|
|
|
|
|
Prerequisite: all machines that will run WCAT must have the administrator account
|
|
|
|
|
|
enabled and must all share a common password.
|
|
|
|
|
|
|
|
|
|
|
|
1. Log into the WCAT Controller as administrator.
|
|
|
|
|
|
2. Install wcat.msi on the machine to be used as a WCAT Controller.
|
|
|
|
|
|
3. If any WCAT extension DLLs will be used, copy them to the WCAT installation
|
|
|
|
|
|
directory. (typically c:\Program Files\WCAT)
|
|
|
|
|
|
4. Open a command prompt; navigate to the WCAT installation directory.
|
|
|
|
|
|
5. Run <20>cscript //H:Cscript<70>
|
|
|
|
|
|
6. Run <20>wcat.wsf <20>terminate <20>update <20>clients {comma separated list of WCAT client
|
|
|
|
|
|
machines}<7D> where the <20>clients<74> parameter accepts a comma separated list (no
|
|
|
|
|
|
spaces) of the machines you plan on using as WCAT Client machines. Note: If
|
|
|
|
|
|
the WCAT Controller machine will also be used as a WCAT Client, include
|
|
|
|
|
|
<20>localhost<73> OR the name of the WCAT Controller machine in the list of clients.
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: If WCAT has never been installed on the WCAT Client machines before,
|
|
|
|
|
|
this will cause the machines to reboot.
|
|
|
|
|
|
|
|
|
|
|
|
Running WCAT
|
|
|
|
|
|
1. Log into the WCAT Controller as administrator.
|
|
|
|
|
|
2. Install wcat.msi on the machine to be used as a WCAT Controller.
|
|
|
|
|
|
3. Open a command prompt, navigate to the WCAT installation directory (typically
|
|
|
|
|
|
c:\Program Files\WCAT)
|
|
|
|
|
|
4. Run <20>wcat.wsf <20>terminate <20>run <20>clients {comma separated client list} <20>t
|
|
|
|
|
|
{scenario file} <20>f {settings file} <20>s {name of the Web Server} <20>singleip -x
|
|
|
|
|
|
5. Output will be generated in the current directory, <20>log.xml<6D>. To change this,
|
|
|
|
|
|
use the <20>-o<> flag. For more help on options to pass to wcat.wsf type
|
|
|
|
|
|
<20>wcctl.exe -?<3F>
|
