diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..e69de29 diff --git a/HACKING b/HACKING new file mode 100644 index 0000000..cae3366 --- /dev/null +++ b/HACKING @@ -0,0 +1,226 @@ +Ok, this is a brain-dump of everything I've learned about MDB files. I'm am +using Access 97, so everything I say applies to that and maybe or maybe not +other versions. + +Right, so here goes: + +Note: It appears that much of the data in the pages is unitialized garbage. +This makes the task of figuring out the format a bit more challenging. + +Pages +----- + +MDB files are a set of pages. These pages are 2K (2048 bytes) in size, so in a +hex dump of the data they start on adreeses like xxx000 and xxx800. + +The first byte of each page seems to be a type indentifier for instance the +first page in the mdb file is 0x00, which no other pages seems to share. Other +pages have values of 0x01, 0x02, 0x03, 0x04 though the exact meaning of these +is currently a mystery. (0x04 seems to be data I guess). + +The second byte is always 0x01 as far as I can tell. + +At some point in the file the page layout is apparently abandoned though the +very last 2K in the file again looks like a valid page. The purpose of this +non-paged region is so far unknown . + +Bytes after the first and second seemed to depend on the type of page, although bytes 4-7 seem to indicate a page type of some sort. 02 00 00 00 is found on all catalog pages. + +Pages seem to have two parts, a header and a data portion. The header starts +at the front of the page and builds up. The data is packed to the end of the +page. This means the last byte of the data portion is the last byte of the +page. + +Byte Order +---------- + +All offsets to data within the file are in little endian (intel) order + +Catalogs +-------- + +So far the first page of the catalog has always been seen at 0x9000 bytes into +the file. It is unclear whether this is always where it occurs, or whether a +pointer to this location exists elsewhere. + +The header to the catalog page(s) start look something like this: + ++------+---------+--------------------------------------------------------+ +| 0x01 | 1 byte | Page type | +| 0x01 | 1 byte | Unknown | +| ???? | 2 bytes | A pointer of unknown use into the page | +| 0x02 | 1 byte | Unknown | +| 0x00 | 3 bytes | Possibly part of a 32 bit int including the 0x02 above | +| ???? | 2 bytes | a 16bit int of the number of records on this page | ++-------------------------------------------------------------------------+ +| Iterate for the number of records | ++-------------------------------------------------------------------------+ +| ???? | 2 bytes | offset to the records location on this page | ++-------------------------------------------------------------------------+ + +The rest of the data is packed to the end of the page, such that the last +record ends on byte 2047 (0 based). + +Some of the offsets are not within the bounds of the page. The reason for this +is not presently understood and the current code discards them silently. +Offsets that have 0x40 in the high order byte point to a location within the +page where a pointer to another catalog page is stored. This does not seem to +yeild a complete chain of catalog pages and is currently being ignored in favor +of a brute force read of the entire database for catalog pages. + +Little is understood of the meaning of the bytes that make up the records. They +vary in size, but portion prior to the objects name seems to be fixed. All +records start with a '0x11'. The next two bytes are a page number to the column definitions. (see Column Definition). + +Byte offset 9 from the beginning of the record contains it's type. Here is a +table of known types: + +0x00 Form +0x01 User Table +0x02 Macro +0x03 System Table +0x04 Report +0x05 Query +0x06 Linked Table +0x07 Module +0x0b Unknown but used for two objects (AccessLayout and UserDefined) + +Byte offset 31 from the begining of the record starts the object's name. I am +not presently aware of any field defining the length of the name, so the present +course of action has been to stop at the first non-printable character +(generally a 0x03 or 0x02) + +After the name there is sometimes have (not yet determined why only sometimes) +a page pointer and offset to the KKD records (see below). There is also pointer to other catalog pages, but I'm not really sure how to parse those. + +Table Definition +----------------- + +The second and third bytes of each catalog entry store a 16 bit page pointer to +a table definition, including name, type, size, number of datarows, a pointer +to the first data page, and possibly more. I haven't fully figured this out so what follows is rough. + +The header to table definition pages start look something like this: + ++------+---------+--------------------------------------------------------+ +| 0x02 | 1 byte | Page type | +| 0x01 | 1 byte | Unknown | +| 'VC' | 2 bytes | ??? | +| 0x00 | 4 bytes | Pointer to continuation page (if multipage table def) | +| ???? | 4 bytes | appears to be a length of the data | +| ???? | 4 bytes | number of rows of data in this table | +| 0x00 | 4 bytes | ??? | +| 0x4e | 1 byte | ??? | +| ???? | 2 bytes | generally same as # of cols but not always | +| ???? | 2 bytes | ??? | +| ???? | 2 bytes | number of columns in table | +| ???? | 4 bytes | number of indexes for this table | +| ???? | 4 bytes | number of index entries for this table | +| 0x00 | 1 byte | ??? | +| ???? | 2 bytes | page number of first datapage for table | +| ???? | 2 bytes | ??? | +| ???? | 2 bytes | page number of first datapage for table | +| 0x00 | 1 byte | ??? | ++-------------------------------------------------------------------------+ +| Iterate for 2 x number of indexes | ++-------------------------------------------------------------------------+ +| ???? | 4 bytes | number of rows in table | +| ???? | 4 bytes | number of rows in the index | ++-------------------------------------------------------------------------+ + +The next few bytes are somewhat of a mystery right now, but around 0x2B from +the start of the page (though not always) begins a series of 18 byte records +one for each column present. It's format is as follows: ++------+---------+--------------------------------------------------------+ +| ???? | 1 byte | Column Type (see table below) | +| ???? | 2 bytes | Column Number, ascending sequential number, starts at 0| +| ???? | 1 byte | unknown. 1 is sometimes seen in text types | +| ???? | 1 byte | unknown | +| ???? | 4 bytes | Column Number (again) | +| ???? | 6 bytes | ??? (timestamp?) | +| ???? | 1 bytes | bitmask of some sort. low order bit indicates variable | +| | | length column | +| ???? | 2 bytes | length of column | ++-------------------------------------------------------------------------+ + +Column Type may be one of the following (not complete). + +0x03 Integer (16 bit) +0x04 Long Integer (32 bit) +0x08 Short Date/Time +0x0a Text +0x0c Hyperlink + +Following the 18 byte column records begins the column names, listed in order +with a 1 byte size prefix preceding each name. + +After this are a series of 39 byte fields for each index. At offset 34 is a 4 byte page number where the index lives. + +Beyond this are a series of 20 byte fields for each 'index entry'. There may be more entrys than indexes and byte 20 represents its type (0x00 for normal index, 0x01 for Primary Key, and 0x02 otherwise). + +It is currently unknown how indexes are mapped to columns or the format of the index pages. + +Data Rows +--------- + +The header of a data page looks like this: + ++------+---------+--------------------------------------------------------+ +| 0x01 | 1 byte | Page type | +| 0x01 | 1 byte | Unknown | +| ???? | 2 bytes | Unknown | +| ???? | 2 bytes | Page pointer to table definition | +| 0x00 | 2 bytes | Unknown | +| ???? | 4 bytes | number of rows of data in this table | ++------+---------+--------------------------------------------------------+ +| Iterate for the number of records | ++-------------------------------------------------------------------------+ +| ???? | 2 bytes | offset to the records location on this page | ++-------------------------------------------------------------------------+ + +Each data row looks like this: + ++------+---------+--------------------------------------------------------+ +| ???? | 1 byte | Number of columns stored in this row | +| ???? | n bytes | Fixed length columns | +| ???? | n bytes | Variable length columns | +| ???? | 1 byte | length of data from beginning of record | +| ???? | n bytes | offset from start of row for each variable length col | +| ???? | 1 byte | number of variable length columns | +| ???? | n bytes | Null indicator. size is 1 byte per 8 columns. | +| | | 0 indicates a null value. | ++------+---------+--------------------------------------------------------+ + +Note: it is possible for the offset to the beginning of a variable length +column to require more than one byte (if the sum of the lengths of columns is +greater than 255). I have no idea how this is represented in the data as I +have not looked at tables large enough for this to occur yet. + +KKD Records +----------- + +Design View table definitions appear to be stored in 'KKD' records (my name for +them...they always start with 'KKD\0'). Again these reside on pages, packed to +the end of the page. + +They look a little like this: (this needs work...see the kkd.c) + +'K' 'K' 'D' 0x00 +16 bit length value (this includes the length) +0x00 0x00 +0x80 0x00 (0x80 seems to indicate a header) +Then one of more of: 16 bit length field and a value of that size. +For instance: +0x0d 0x00 and 'AccessVersion' (AccessVersion is 13 bytes, 0x0d 0x00 intel order) + +Next comes one of more rows of data. (column names, descriptions, etc...) +16 bit length value (this includes the length) +0x00 0x00 +0x00 0x00 + 16bit length field (this include the length itself) + 4 bytes of unknown purpose + 16 bit length field (non-inclusive) + value (07.53 for the AccessVersion example above) + +See kkd.c for an example, although it needs cleanup. + diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..647fa0c --- /dev/null +++ b/Makefile @@ -0,0 +1,336 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = /bin/sh + +srcdir = . +top_srcdir = . +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = . + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 +YACC = bison -y + +SUBDIRS = src + +DEFDIR = $(prefix) +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +DIST_COMMON = README AUTHORS COPYING COPYING.LIB ChangeLog INSTALL \ +Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \ +configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): configure.in acinclude.m4 + cd $(srcdir) && $(ACLOCAL) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + + + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..9e48d28 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,3 @@ +SUBDIRS = src + +DEFDIR = $(prefix) diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..7459ecb --- /dev/null +++ b/Makefile.in @@ -0,0 +1,336 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ +CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ +YACC = @YACC@ + +SUBDIRS = src + +DEFDIR = $(prefix) +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +DIST_COMMON = README AUTHORS COPYING COPYING.LIB ChangeLog INSTALL \ +Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \ +configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): configure.in acinclude.m4 + cd $(srcdir) && $(ACLOCAL) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..8ea505b --- /dev/null +++ b/NEWS @@ -0,0 +1,4 @@ +The organization of the project files has changed a bit from that last release. +The autoconf stuff has been moved to the root directory. The include directory +has also been moved from src/include to include + diff --git a/README b/README index d1e1e9c..8a8ef6a 100644 --- a/README +++ b/README @@ -1,10 +1,10 @@ -This is mdbtools version 0.2 +This is mdbtools version 0.3 -This software is alpha so don't expect too much unless you know C and +This software is beta so don't expect too much unless you know C and probably a little something about databases and reverse engineering file formats, you're welcome to try it out but don't expect miracles. -For the rest of you, read the HACKERS file for a description of where the code +For the rest of you, read the HACKING file for a description of where the code stands and what has been gleened of the file format. The initial goal of these tools is to be able to extract data structures and diff --git a/src/Makefile b/src/Makefile new file mode 100644 index 0000000..6c2074c --- /dev/null +++ b/src/Makefile @@ -0,0 +1,291 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = /bin/sh + +srcdir = . +top_srcdir = .. +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = .. + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 +YACC = bison -y + +SUBDIRS = libmdb util extras sql + +DEFDIR = $(prefix) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + + + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool + +distclean: distclean-recursive + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/Makefile.am b/src/Makefile.am new file mode 100644 index 0000000..f62c5ae --- /dev/null +++ b/src/Makefile.am @@ -0,0 +1,4 @@ +SUBDIRS = libmdb util extras sql + +DEFDIR = $(prefix) + diff --git a/src/Makefile.in b/src/Makefile.in index 486e641..9b1eabc 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -1,71 +1,291 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am -SHELL = /bin/sh -VPATH = @srcdir@ +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ -top_srcdir = @top_srcdir@ srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ -bindir = $(exec_prefix)/bin -infodir = $(exec_prefix)/info -libdir = $(exec_prefix)/lib -mandir = $(exec_prefix)/man/man1 -CC = @CC@ -CPPFLAGS = @CPPFLAGS@ -CFLAGS = $(CPPFLAG) @CFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -INSTALL= @INSTALL@ +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -RM = @RM@ -subdirs = libmdb util extras -all: - @for dir in ${subdirs}; do \ - (cd $$dir && $(MAKE) all) \ - || case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -clean: - @for dir in ${subdirs} include; do \ - (cd $$dir && $(MAKE) clean && rm -f Makefile) \ - || case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \ - rm -f config.log config.status Makefile config.cache; \ - done && test -z "$$fail" -install: - @for dir in ${subdirs} include; do \ - (cd $$dir && $(MAKE) install) \ - || case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -uninstall: - @for dir in ${subdirs} include; do \ - (cd $$dir && $(MAKE) uninstall) \ - || case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ -# automatic re-running of configure if the configure.in file has changed -${srcdir}/configure: configure.in - cd ${srcdir} && autoconf +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ +CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ +YACC = @YACC@ -# autoheader might not change config.h.in so touch a stamp file -${srcdir}/config.h.in: stamp-h.in +SUBDIRS = libmdb util extras sql -${srcdir}/stamp-h.in: configure.in - cd ${srcdir} && autoheader - echo timestamp > ${srcdir}/stamp-h.in +DEFDIR = $(prefix) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +DIST_COMMON = Makefile.am Makefile.in -config.h: stamp-h -stamp-h: config.h.in config.status - ./config.status +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -Makefile: Makefile.in config.status - ./config.status +TAR = gtar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile -config.status: configure - ./config.status --recheck +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool + +distclean: distclean-recursive + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/configure b/src/configure deleted file mode 100755 index fe7bf41..0000000 --- a/src/configure +++ /dev/null @@ -1,1550 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=extras/dump.c - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:529: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:559: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:610: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:642: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 653 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:684: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:689: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:717: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:749: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - -echo $ac_n "checking for main in -libs""... $ac_c" 1>&6 -echo "configure:777: checking for main in -libs" >&5 -ac_lib_var=`echo ibs'_'main | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-libs $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo ibs | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&6 -fi - -echo $ac_n "checking for mdb_free_handle in -lmdb""... $ac_c" 1>&6 -echo "configure:820: checking for mdb_free_handle in -lmdb" >&5 -ac_lib_var=`echo mdb'_'mdb_free_handle | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lmdb $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo mdb | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&6 -fi - - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:868: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:906: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -nologo -E" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:923: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:948: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#include -#include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:961: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - ac_cv_header_stdc=yes -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then - : -else - cat > conftest.$ac_ext < -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -if { (eval echo configure:1028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then - : -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 -if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF -#define STDC_HEADERS 1 -EOF - -fi - -for ac_hdr in fcntl.h limits.h unistd.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1055: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1065: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done - - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1093: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:1147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1168: checking for size_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_size_t=yes -else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF -#define size_t unsigned -EOF - -fi - - -OLDCFLAGS="$CFLAGS" -CFLAGS="" -echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:1204: checking whether byte ordering is bigendian" >&5 -if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_c_bigendian=unknown -# See if sys/param.h defines the BYTE_ORDER macro. -cat > conftest.$ac_ext < -#include -int main() { - -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif -; return 0; } -EOF -if { (eval echo configure:1222: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - # It does; now see whether it defined to BIG_ENDIAN or not. -cat > conftest.$ac_ext < -#include -int main() { - -#if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif -; return 0; } -EOF -if { (eval echo configure:1237: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_bigendian=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_bigendian=no -fi -rm -f conftest* -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi -rm -f conftest* -if test $ac_cv_c_bigendian = unknown; then -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then - ac_cv_c_bigendian=no -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_bigendian=yes -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_c_bigendian" 1>&6 -if test $ac_cv_c_bigendian = yes; then - cat >> confdefs.h <<\EOF -#define WORDS_BIGENDIAN 1 -EOF - -fi - -if test $ac_cv_c_bigendian = yes; then OLDCFLAGS="$OLDCFLAGS -DHW_BIG_ENDIAN"; -else OLDCFLAGS="$OLDCFLAGS -DHW_LITTLE_ENDIAN"; fi -CFLAGS=$OLDCFLAGS - - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS </dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir - -trap 'rm -fr `echo "util/Makefile extras/Makefile Makefile libmdb/Makefile include/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@CC@%$CC%g -s%@SET_MAKE@%$SET_MAKE%g -s%@CPP@%$CPP%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/src/configure.in b/src/configure.in deleted file mode 100644 index 502bacc..0000000 --- a/src/configure.in +++ /dev/null @@ -1,31 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. -AC_INIT(extras/dump.c) - -AC_PROG_CC(gcc) -dnl Checks for programs. -AC_PROG_MAKE_SET - -dnl Checks for libraries. -dnl Replace `main' with a function in -libs: -AC_CHECK_LIB(ibs, main) -dnl Replace `main' with a function in -lmdb: -AC_CHECK_LIB(mdb, mdb_free_handle) - -dnl Checks for header files. -AC_HEADER_STDC -AC_CHECK_HEADERS(fcntl.h limits.h unistd.h) - -dnl Checks for typedefs, structures, and compiler characteristics. -AC_C_CONST -AC_TYPE_SIZE_T - -OLDCFLAGS="$CFLAGS" -CFLAGS="" -AC_C_BIGENDIAN -if test $ac_cv_c_bigendian = yes; then OLDCFLAGS="$OLDCFLAGS -DHW_BIG_ENDIAN"; -else OLDCFLAGS="$OLDCFLAGS -DHW_LITTLE_ENDIAN"; fi -CFLAGS=$OLDCFLAGS - -dnl Checks for library functions. - -AC_OUTPUT(util/Makefile extras/Makefile Makefile libmdb/Makefile include/Makefile) diff --git a/src/extras/Makefile b/src/extras/Makefile new file mode 100644 index 0000000..702632e --- /dev/null +++ b/src/extras/Makefile @@ -0,0 +1,344 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = /bin/sh + +srcdir = . +top_srcdir = ../.. +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = ../.. + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 +YACC = bison -y + +bin_PROGRAMS = mdb-dump +mdb_dump_SOURCES = mdb-dump.c mdbsupport.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir) +CPPFLAGS = +LDFLAGS = +mdb_dump_OBJECTS = mdb-dump.o mdbsupport.o +mdb_dump_LDADD = $(LDADD) +mdb_dump_DEPENDENCIES = ../libmdb/libmdb.la +mdb_dump_LDFLAGS = +CFLAGS = -g -O2 +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/mdb-dump.P .deps/mdbsupport.P +SOURCES = $(mdb_dump_SOURCES) +OBJECTS = $(mdb_dump_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extras/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-dump: $(mdb_dump_OBJECTS) $(mdb_dump_DEPENDENCIES) + @rm -f mdb-dump + $(LINK) $(mdb_dump_LDFLAGS) $(mdb_dump_OBJECTS) $(mdb_dump_LDADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/extras + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extras/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/extras/Makefile.am b/src/extras/Makefile.am new file mode 100644 index 0000000..d6b5d37 --- /dev/null +++ b/src/extras/Makefile.am @@ -0,0 +1,5 @@ +bin_PROGRAMS = mdb-dump +mdb_dump_SOURCES = mdb-dump.c mdbsupport.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` diff --git a/src/extras/Makefile.in b/src/extras/Makefile.in index 649cdce..1a2a0a6 100644 --- a/src/extras/Makefile.in +++ b/src/extras/Makefile.in @@ -1,45 +1,344 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am -SHELL = /bin/sh -VPATH = @srcdir@ +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ -top_srcdir = @top_srcdir@ srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ -bindir = $(exec_prefix)/bin -infodir = $(exec_prefix)/info -libdir = $(exec_prefix)/lib -mandir = $(exec_prefix)/man/man1 +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ +YACC = @YACC@ + +bin_PROGRAMS = mdb-dump +mdb_dump_SOURCES = mdb-dump.c mdbsupport.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = @DEFS@ -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ -CFLAGS = $(CPPFLAG) @CFLAGS@ LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -INSTALL= @INSTALL@ +mdb_dump_OBJECTS = mdb-dump.o mdbsupport.o +mdb_dump_LDADD = $(LDADD) +mdb_dump_DEPENDENCIES = ../libmdb/libmdb.la +mdb_dump_LDFLAGS = +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -PROGS = mdb-dump -OBJS = dump.o -all: $(PROGS) +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -clean: - rm -f core *.o $(PROGS) +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/mdb-dump.P .deps/mdbsupport.P +SOURCES = $(mdb_dump_SOURCES) +OBJECTS = $(mdb_dump_OBJECTS) -mdb-dump: dump.o - $(CC) -g -o $@ $< +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extras/Makefile -.c.o: - $(CC) $(CFLAGS) -g -c $< +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -install: - @for prog in $(PROGS); do \ - echo " copying $$prog to $(bindir)"; \ - cp $$prog $(bindir); \ - done -uninstall: - @for prog in $(PROGS); do \ - echo " removing $$prog from $(bindir)"; \ - rm -f $(bindir)/$$prog; \ - done +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-dump: $(mdb_dump_OBJECTS) $(mdb_dump_DEPENDENCIES) + @rm -f mdb-dump + $(LINK) $(mdb_dump_LDFLAGS) $(mdb_dump_OBJECTS) $(mdb_dump_LDADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/extras + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extras/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/extras/dump.c b/src/extras/mdb-dump.c similarity index 100% rename from src/extras/dump.c rename to src/extras/mdb-dump.c diff --git a/src/extras/mdbsupport.c b/src/extras/mdbsupport.c index d36eb83..3fc5d75 100644 --- a/src/extras/mdbsupport.c +++ b/src/extras/mdbsupport.c @@ -1,6 +1,5 @@ /* support routines for code generated by the util programs */ -#include "util.h" #include void dump_int (int i) diff --git a/src/libmdb/Makefile b/src/libmdb/Makefile new file mode 100644 index 0000000..54b1417 --- /dev/null +++ b/src/libmdb/Makefile @@ -0,0 +1,344 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = /bin/sh + +srcdir = . +top_srcdir = ../.. +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = ../.. + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 +YACC = bison -y + +lib_LTLIBRARIES = libmdb.la +libmdb_la_SOURCES = catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(lib_LTLIBRARIES) + + +DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir) +CPPFLAGS = +LDFLAGS = +libmdb_la_LDFLAGS = +libmdb_la_LIBADD = +libmdb_la_OBJECTS = catalog.lo mem.lo file.lo kkd.lo table.lo data.lo \ +dump.lo backend.lo money.lo sargs.lo index.lo +CFLAGS = -g -O2 +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/backend.P .deps/catalog.P .deps/data.P .deps/dump.P \ +.deps/file.P .deps/index.P .deps/kkd.P .deps/mem.P .deps/money.P \ +.deps/sargs.P .deps/table.P +SOURCES = $(libmdb_la_SOURCES) +OBJECTS = $(libmdb_la_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/libmdb/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-libLTLIBRARIES: + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + +distclean-libLTLIBRARIES: + +maintainer-clean-libLTLIBRARIES: + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(libdir) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ + $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ + else :; fi; \ + done + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +libmdb.la: $(libmdb_la_OBJECTS) $(libmdb_la_DEPENDENCIES) + $(LINK) -rpath $(libdir) $(libmdb_la_LDFLAGS) $(libmdb_la_OBJECTS) $(libmdb_la_LIBADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/libmdb + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/libmdb/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-libLTLIBRARIES +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-libLTLIBRARIES +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(libdir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-libLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ +clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ +uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ +distclean-compile clean-compile maintainer-clean-compile \ +mostlyclean-libtool distclean-libtool clean-libtool \ +maintainer-clean-libtool tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +distclean-depend clean-depend maintainer-clean-depend info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/libmdb/Makefile.am b/src/libmdb/Makefile.am new file mode 100644 index 0000000..a93ca1e --- /dev/null +++ b/src/libmdb/Makefile.am @@ -0,0 +1,4 @@ +lib_LTLIBRARIES = libmdb.la +libmdb_la_SOURCES= catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LIBS = `glib-config --libs` diff --git a/src/libmdb/Makefile.in b/src/libmdb/Makefile.in index 5188ce8..c8df599 100644 --- a/src/libmdb/Makefile.in +++ b/src/libmdb/Makefile.in @@ -1,59 +1,344 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am -SHELL = /bin/sh -VPATH = @srcdir@ +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ -top_srcdir = @top_srcdir@ srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ -bindir = $(exec_prefix)/bin -infodir = $(exec_prefix)/info -libdir = $(exec_prefix)/lib -mandir = $(exec_prefix)/man/man1 +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ +YACC = @YACC@ + +lib_LTLIBRARIES = libmdb.la +libmdb_la_SOURCES = catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(lib_LTLIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ -CFLAGS = $(CPPFLAG) @CFLAGS@ LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -INSTALL= @INSTALL@ -LIBLIST = libmdb.a +libmdb_la_LDFLAGS = +libmdb_la_LIBADD = +libmdb_la_OBJECTS = catalog.lo mem.lo file.lo kkd.lo table.lo data.lo \ +dump.lo backend.lo money.lo sargs.lo index.lo +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -INC = -I ../include `glib-config --cflags` -OBJS = catalog.o mem.o file.o kkd.o table.o data.o dump.o backend.o money.o sargs.o index.o -all: libmdb +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -libmdb: $(OBJS) - rm -f libmdb.a - ar cq libmdb.a $(OBJS) -clean: - rm -f core *.o *.a +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/backend.P .deps/catalog.P .deps/data.P .deps/dump.P \ +.deps/file.P .deps/index.P .deps/kkd.P .deps/mem.P .deps/money.P \ +.deps/sargs.P .deps/table.P +SOURCES = $(libmdb_la_SOURCES) +OBJECTS = $(libmdb_la_OBJECTS) -.c.o: - $(CC) $(CFLAGS) -g -c $< $(INC) +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/libmdb/Makefile -install: - @for lib in $(LIBLIST); do \ - echo " copying $$lib to $(libdir)"; \ - cp $$lib $(libdir); \ +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-libLTLIBRARIES: + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + +distclean-libLTLIBRARIES: + +maintainer-clean-libLTLIBRARIES: + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(libdir) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ + $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ + else :; fi; \ done -uninstall: - @for lib in $(LIBLIST); do \ - echo " copying $$lib to $(libdir)"; \ - rm -f $(libdir)/$$lib; \ +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done -backend.o: backend.c ../include/mdbtools.h -catalog.o: catalog.c ../include/mdbtools.h -data.o: data.c ../include/mdbtools.h -dump.o: dump.c ../include/mdbtools.h -file.o: file.c ../include/mdbtools.h -kkd.o: kkd.c ../include/mdbtools.h -mem.o: mem.c ../include/mdbtools.h -table.o: table.c ../include/mdbtools.h -sargs.o: sargs.c ../include/mdbtools.h -index.o: sargs.c ../include/mdbtools.h -money.o: money.c +.s.o: + $(COMPILE) -c $< +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +libmdb.la: $(libmdb_la_OBJECTS) $(libmdb_la_DEPENDENCIES) + $(LINK) -rpath $(libdir) $(libmdb_la_LDFLAGS) $(libmdb_la_OBJECTS) $(libmdb_la_LIBADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/libmdb + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/libmdb/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-libLTLIBRARIES +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-libLTLIBRARIES +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(libdir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-libLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ +clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ +uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ +distclean-compile clean-compile maintainer-clean-compile \ +mostlyclean-libtool distclean-libtool clean-libtool \ +maintainer-clean-libtool tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +distclean-depend clean-depend maintainer-clean-depend info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/libmdb/libmdb.a b/src/libmdb/libmdb.a new file mode 100644 index 0000000..a27b849 Binary files /dev/null and b/src/libmdb/libmdb.a differ diff --git a/src/sql/Makefile b/src/sql/Makefile index 29c3e8f..d1a874e 100644 --- a/src/sql/Makefile +++ b/src/sql/Makefile @@ -1,30 +1,356 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + SHELL = /bin/sh -LEX = flex -i + +srcdir = . +top_srcdir = ../.. +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = ../.. + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 + +bin_PROGRAMS = mdb-sql +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` $(READLINE_LIBS) -lfl +mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l YACC = yacc -d -CC = gcc +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir) CPPFLAGS = -CFLAGS = $(CPPFLAG) -g -O2 -DHW_LITTLE_ENDIAN LDFLAGS = -LIBS = -L ../libmdb -lmdb -ll `glib-config --libs` -lreadline -lncurses +mdb_sql_OBJECTS = mdbsql.o main.o parser.o lexer.o +mdb_sql_LDADD = $(LDADD) +mdb_sql_DEPENDENCIES = ../libmdb/libmdb.la +mdb_sql_LDFLAGS = +LEX_OUTPUT_ROOT = lex.yy +LEXLIB = -lfl +CFLAGS = -g -O2 +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in lexer.c parser.c -INC = -I ../include `glib-config --cflags` -I/usr/include/readline -OBJS = y.tab.o lex.yy.o mdbsql.o main.o -all: sql +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -libmdb: $(OBJS) - rm -f libmdb.a - ar cq libmdb.a $(OBJS) -clean: - rm -f core *.o *.a y.tab.* lex.yy.c sql +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/lexer.P .deps/main.P .deps/mdbsql.P .deps/parser.P +SOURCES = $(mdb_sql_SOURCES) +OBJECTS = $(mdb_sql_OBJECTS) -lex.yy.c: sql.l - $(LEX) $< -y.tab.c: sql.y - $(YACC) $< -.c.o: - $(CC) $(CFLAGS) -g -c $< $(INC) +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .l .lo .o .s .y +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sql/Makefile -sql: $(OBJS) - $(CC) -o $@ $(LDFLAGS) $(OBJS) $(LIBS) +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-sql: $(mdb_sql_OBJECTS) $(mdb_sql_DEPENDENCIES) + @rm -f mdb-sql + $(LINK) $(mdb_sql_LDFLAGS) $(mdb_sql_OBJECTS) $(mdb_sql_LDADD) $(LIBS) +.l.c: + $(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@ +.y.c: + $(YACC) $(AM_YFLAGS) $(YFLAGS) $< && mv y.tab.c $*.c + if test -f y.tab.h; then \ + if cmp -s y.tab.h $*.h; then rm -f y.tab.h; else mv y.tab.h $*.h; fi; \ + else :; fi +parser.h: parser.c + + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/sql + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sql/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: + -test -z "lexerlparserhparserc" || rm -f lexerl parserh parserc +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/sql/Makefile.am b/src/sql/Makefile.am new file mode 100644 index 0000000..55efc41 --- /dev/null +++ b/src/sql/Makefile.am @@ -0,0 +1,6 @@ +bin_PROGRAMS = mdb-sql +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` $(READLINE_LIBS) @LEXLIB@ +mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l +YACC = yacc -d diff --git a/src/sql/Makefile.in b/src/sql/Makefile.in new file mode 100644 index 0000000..5146b85 --- /dev/null +++ b/src/sql/Makefile.in @@ -0,0 +1,356 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ +CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ + +bin_PROGRAMS = mdb-sql +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` $(READLINE_LIBS) @LEXLIB@ +mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l +YACC = yacc -d +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +mdb_sql_OBJECTS = mdbsql.o main.o parser.o lexer.o +mdb_sql_LDADD = $(LDADD) +mdb_sql_DEPENDENCIES = ../libmdb/libmdb.la +mdb_sql_LDFLAGS = +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LEXLIB = @LEXLIB@ +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in lexer.c parser.c + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/lexer.P .deps/main.P .deps/mdbsql.P .deps/parser.P +SOURCES = $(mdb_sql_SOURCES) +OBJECTS = $(mdb_sql_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .l .lo .o .s .y +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sql/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-sql: $(mdb_sql_OBJECTS) $(mdb_sql_DEPENDENCIES) + @rm -f mdb-sql + $(LINK) $(mdb_sql_LDFLAGS) $(mdb_sql_OBJECTS) $(mdb_sql_LDADD) $(LIBS) +.l.c: + $(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@ +.y.c: + $(YACC) $(AM_YFLAGS) $(YFLAGS) $< && mv y.tab.c $*.c + if test -f y.tab.h; then \ + if cmp -s y.tab.h $*.h; then rm -f y.tab.h; else mv y.tab.h $*.h; fi; \ + else :; fi +parser.h: parser.c + + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/sql + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sql/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: + -test -z "lexerlparserhparserc" || rm -f lexerl parserh parserc +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/sql/Makefile.orig b/src/sql/Makefile.orig new file mode 100644 index 0000000..230c5eb --- /dev/null +++ b/src/sql/Makefile.orig @@ -0,0 +1,30 @@ +SHELL = /bin/sh +LEX = flex -i +YACC = yacc -d +CC = gcc +CPPFLAGS = +CFLAGS = $(CPPFLAG) -g -O2 -DHW_LITTLE_ENDIAN +LDFLAGS = +LIBS = -L ../libmdb -lmdb -ll `glib-config --libs` -lreadline -lncurses + +INC = -I ../include `glib-config --cflags` -I/usr/include/readline +OBJS = y.tab.o lex.yy.o mdbsql.o main.o + +all: mdb-sql + +libmdb: $(OBJS) + rm -f libmdb.a + ar cq libmdb.a $(OBJS) +clean: + rm -f core *.o *.a y.tab.* lex.yy.c mdb-sql + +lex.yy.c: sql.l + $(LEX) $< +y.tab.c: sql.y + $(YACC) $< +.c.o: + $(CC) $(CFLAGS) -g -c $< $(INC) + +sql: $(OBJS) + $(CC) -o $@ $(LDFLAGS) $(OBJS) $(LIBS) + diff --git a/src/sql/lexer.c b/src/sql/lexer.c new file mode 100644 index 0000000..4e7c77c --- /dev/null +++ b/src/sql/lexer.c @@ -0,0 +1,1655 @@ +/* A lexical scanner generated by flex */ + +/* Scanner skeleton version: + * $Header: /Users/brian/cvs/mdbtools/mdbtools/src/sql/Attic/lexer.c,v 1.1 2001/04/11 23:33:19 brianb Exp $ + */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 + +#include + + +/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */ +#ifdef c_plusplus +#ifndef __cplusplus +#define __cplusplus +#endif +#endif + + +#ifdef __cplusplus + +#include +#include + +/* Use prototypes in function declarations. */ +#define YY_USE_PROTOS + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +#if __STDC__ + +#define YY_USE_PROTOS +#define YY_USE_CONST + +#endif /* __STDC__ */ +#endif /* ! __cplusplus */ + +#ifdef __TURBOC__ + #pragma warn -rch + #pragma warn -use +#include +#include +#define YY_USE_CONST +#define YY_USE_PROTOS +#endif + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + + +#ifdef YY_USE_PROTOS +#define YY_PROTO(proto) proto +#else +#define YY_PROTO(proto) () +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN yy_start = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START ((yy_start - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart( yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#define YY_BUF_SIZE 16384 + +typedef struct yy_buffer_state *YY_BUFFER_STATE; + +extern int yyleng; +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + +/* The funky do-while in the following #define is used to turn the definition + * int a single C statement (which needs a semi-colon terminator). This + * avoids problems with code like: + * + * if ( condition_holds ) + * yyless( 5 ); + * else + * do_something_else(); + * + * Prior to using the do-while the compiler would get upset at the + * "else" because it interpreted the "if" statement as being all + * done when it reached the ';' after the yyless() call. + */ + +/* Return all but the first 'n' matched characters back to the input stream. */ + +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + *yy_cp = yy_hold_char; \ + YY_RESTORE_YY_MORE_OFFSET \ + yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, yytext_ptr ) + +/* The following is because we cannot portably get our hands on size_t + * (without autoconf's help, which isn't available because we want + * flex-generated scanners to compile on their own). + */ +typedef unsigned int yy_size_t; + + +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + }; + +static YY_BUFFER_STATE yy_current_buffer = 0; + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + */ +#define YY_CURRENT_BUFFER yy_current_buffer + + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; + +static int yy_n_chars; /* number of characters read into yy_ch_buf */ + + +int yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 1; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart YY_PROTO(( FILE *input_file )); + +void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer )); +void yy_load_buffer_state YY_PROTO(( void )); +YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size )); +void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b )); +void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file )); +void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b )); +#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer ) + +YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size )); +YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str )); +YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len )); + +static void *yy_flex_alloc YY_PROTO(( yy_size_t )); +static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t )); +static void yy_flex_free YY_PROTO(( void * )); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! yy_current_buffer ) \ + yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \ + yy_current_buffer->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! yy_current_buffer ) \ + yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \ + yy_current_buffer->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (yy_current_buffer->yy_at_bol) + +typedef unsigned char YY_CHAR; +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; +typedef int yy_state_type; +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state YY_PROTO(( void )); +static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state )); +static int yy_get_next_buffer YY_PROTO(( void )); +static void yy_fatal_error YY_PROTO(( yyconst char msg[] )); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + yytext_ptr = yy_bp; \ + yyleng = (int) (yy_cp - yy_bp); \ + yy_hold_char = *yy_cp; \ + *yy_cp = '\0'; \ + yy_c_buf_p = yy_cp; + +#define YY_NUM_RULES 15 +#define YY_END_OF_BUFFER 16 +static yyconst short int yy_accept[61] = + { 0, + 12, 12, 16, 14, 9, 15, 14, 13, 14, 12, + 10, 10, 10, 10, 10, 10, 10, 10, 0, 11, + 0, 13, 0, 13, 13, 12, 10, 10, 10, 10, + 10, 10, 10, 4, 10, 0, 12, 12, 7, 10, + 10, 10, 10, 10, 10, 10, 2, 5, 10, 10, + 10, 10, 10, 10, 6, 10, 1, 8, 3, 0 + } ; + +static yyconst int yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 1, 1, 2, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, 1, 1, 1, 1, 1, 1, 4, 5, + 5, 1, 6, 1, 7, 8, 9, 10, 10, 10, + 10, 10, 10, 10, 10, 10, 10, 1, 1, 1, + 1, 1, 1, 1, 11, 11, 11, 11, 12, 11, + 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, + 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, + 12, 11, 11, 11, 11, 11, 13, 14, 15, 16, + + 17, 18, 11, 19, 20, 11, 11, 21, 22, 23, + 24, 11, 11, 25, 26, 27, 11, 11, 28, 11, + 11, 11, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst int yy_meta[29] = + { 0, + 1, 1, 2, 1, 3, 3, 1, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + } ; + +static yyconst short int yy_base[64] = + { 0, + 0, 0, 111, 199, 199, 199, 96, 24, 26, 37, + 29, 31, 40, 42, 48, 44, 50, 57, 87, 79, + 63, 52, 69, 74, 80, 0, 63, 85, 87, 90, + 94, 96, 98, 100, 107, 65, 45, 79, 110, 113, + 117, 119, 121, 123, 125, 132, 134, 139, 143, 145, + 147, 151, 159, 161, 163, 165, 167, 169, 171, 199, + 192, 194, 40 + } ; + +static yyconst short int yy_def[64] = + { 0, + 60, 1, 60, 60, 60, 60, 61, 62, 62, 62, + 63, 63, 63, 63, 63, 63, 63, 63, 61, 61, + 60, 10, 10, 10, 10, 10, 63, 63, 63, 63, + 63, 63, 63, 63, 63, 60, 60, 10, 63, 63, + 63, 63, 63, 63, 63, 63, 63, 63, 63, 63, + 63, 63, 63, 63, 63, 63, 63, 63, 63, 0, + 60, 60, 60 + } ; + +static yyconst short int yy_nxt[228] = + { 0, + 4, 5, 6, 7, 4, 4, 4, 8, 9, 10, + 11, 11, 12, 11, 13, 11, 11, 14, 11, 11, + 15, 11, 11, 11, 11, 16, 17, 18, 21, 21, + 60, 60, 23, 24, 60, 24, 22, 23, 22, 23, + 24, 60, 60, 27, 25, 23, 26, 22, 23, 22, + 23, 22, 23, 28, 37, 22, 23, 22, 23, 22, + 32, 22, 33, 29, 22, 23, 30, 31, 36, 36, + 22, 23, 37, 34, 37, 35, 22, 60, 22, 36, + 36, 22, 20, 38, 21, 21, 22, 22, 38, 24, + 20, 24, 22, 23, 22, 23, 24, 22, 23, 20, + + 39, 22, 23, 22, 23, 22, 23, 22, 23, 40, + 60, 44, 60, 41, 22, 23, 43, 22, 23, 42, + 22, 23, 60, 45, 22, 23, 22, 23, 22, 23, + 22, 23, 22, 23, 60, 46, 60, 49, 47, 22, + 23, 22, 23, 50, 60, 48, 22, 23, 52, 51, + 22, 23, 22, 23, 22, 23, 60, 53, 22, 23, + 60, 54, 60, 55, 60, 56, 22, 23, 22, 23, + 22, 23, 22, 23, 22, 23, 22, 23, 22, 23, + 60, 60, 60, 60, 60, 57, 58, 60, 60, 60, + 60, 59, 19, 60, 19, 19, 22, 22, 3, 60, + + 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 60, 60, 60, 60, 60, 60 + } ; + +static yyconst short int yy_chk[228] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 8, 8, + 9, 9, 8, 8, 9, 8, 11, 11, 12, 12, + 8, 10, 10, 63, 10, 10, 10, 13, 13, 14, + 14, 16, 16, 12, 37, 15, 15, 17, 17, 22, + 16, 22, 17, 13, 18, 18, 14, 15, 21, 21, + 27, 27, 21, 17, 36, 18, 23, 23, 23, 24, + 24, 24, 20, 24, 25, 25, 38, 25, 38, 25, + 19, 25, 28, 28, 29, 29, 25, 30, 30, 7, + + 28, 31, 31, 32, 32, 33, 33, 34, 34, 29, + 3, 33, 0, 30, 35, 35, 32, 39, 39, 31, + 40, 40, 0, 35, 41, 41, 42, 42, 43, 43, + 44, 44, 45, 45, 0, 40, 0, 43, 41, 46, + 46, 47, 47, 44, 0, 42, 48, 48, 46, 45, + 49, 49, 50, 50, 51, 51, 0, 49, 52, 52, + 0, 50, 0, 51, 0, 52, 53, 53, 54, 54, + 55, 55, 56, 56, 57, 57, 58, 58, 59, 59, + 0, 0, 0, 0, 0, 53, 54, 0, 0, 0, + 0, 56, 61, 0, 61, 61, 62, 62, 60, 60, + + 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, + 60, 60, 60, 60, 60, 60, 60 + } ; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "lexer.l" +#define INITIAL 0 +#line 2 "lexer.l" +#include +#include "mdbsql.h" +#include "parser.h" + +extern MdbSQL *g_sql; +#line 436 "lex.yy.c" + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap YY_PROTO(( void )); +#else +extern int yywrap YY_PROTO(( void )); +#endif +#endif + +#ifndef YY_NO_UNPUT +static void yyunput YY_PROTO(( int c, char *buf_ptr )); +#endif + +#ifndef yytext_ptr +static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int )); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen YY_PROTO(( yyconst char * )); +#endif + +#ifndef YY_NO_INPUT +#ifdef __cplusplus +static int yyinput YY_PROTO(( void )); +#else +static int input YY_PROTO(( void )); +#endif +#endif + +#if YY_STACK_USED +static int yy_start_stack_ptr = 0; +static int yy_start_stack_depth = 0; +static int *yy_start_stack = 0; +#ifndef YY_NO_PUSH_STATE +static void yy_push_state YY_PROTO(( int new_state )); +#endif +#ifndef YY_NO_POP_STATE +static void yy_pop_state YY_PROTO(( void )); +#endif +#ifndef YY_NO_TOP_STATE +static int yy_top_state YY_PROTO(( void )); +#endif + +#else +#define YY_NO_PUSH_STATE 1 +#define YY_NO_POP_STATE 1 +#define YY_NO_TOP_STATE 1 +#endif + +#ifdef YY_MALLOC_DECL +YY_MALLOC_DECL +#else +#if __STDC__ +#ifndef __cplusplus +#include +#endif +#else +/* Just try to get by without declaring the routines. This will fail + * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int) + * or sizeof(void*) != sizeof(int). + */ +#endif +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ + +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO (void) fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( yy_current_buffer->yy_is_interactive ) \ + { \ + int c = '*', n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \ + && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL int yylex YY_PROTO(( void )) +#endif + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +YY_DECL + { + register yy_state_type yy_current_state; + register char *yy_cp = NULL, *yy_bp = NULL; + register int yy_act; + +#line 9 "lexer.l" + +#line 589 "lex.yy.c" + + if ( yy_init ) + { + yy_init = 0; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! yy_start ) + yy_start = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! yy_current_buffer ) + yy_current_buffer = + yy_create_buffer( yyin, YY_BUF_SIZE ); + + yy_load_buffer_state(); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = yy_c_buf_p; + + /* Support of yytext. */ + *yy_cp = yy_hold_char; + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = yy_start; +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + yy_last_accepting_state = yy_current_state; + yy_last_accepting_cpos = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 61 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 199 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = yy_last_accepting_cpos; + yy_current_state = yy_last_accepting_state; + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + + +do_action: /* This label is used only to access EOF actions. */ + + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = yy_hold_char; + yy_cp = yy_last_accepting_cpos; + yy_current_state = yy_last_accepting_state; + goto yy_find_action; + +case 1: +YY_RULE_SETUP +#line 10 "lexer.l" +{ return SELECT; } + YY_BREAK +case 2: +YY_RULE_SETUP +#line 11 "lexer.l" +{ return FROM; } + YY_BREAK +case 3: +YY_RULE_SETUP +#line 12 "lexer.l" +{ return CONNECT; } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 13 "lexer.l" +{ return TO; } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 14 "lexer.l" +{ return LIST; } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 15 "lexer.l" +{ return WHERE; } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 16 "lexer.l" +{ return AND; } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 17 "lexer.l" +{ return TABLES; } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 18 "lexer.l" +; + YY_BREAK +case 10: +YY_RULE_SETUP +#line 19 "lexer.l" +{ yylval.name = strdup(yytext); return NAME; } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 20 "lexer.l" +{ yylval.name = strdup(yytext); return STRING; } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 21 "lexer.l" +{ + yylval.name = strdup(yytext); return NUMBER; + } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 24 "lexer.l" +{ yylval.name = strdup(yytext); return PATH; } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 25 "lexer.l" +{ return yytext[0]; } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 26 "lexer.l" +ECHO; + YY_BREAK +#line 749 "lex.yy.c" +case YY_STATE_EOF(INITIAL): + yyterminate(); + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = yy_hold_char; + YY_RESTORE_YY_MORE_OFFSET + + if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between yy_current_buffer and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + yy_n_chars = yy_current_buffer->yy_n_chars; + yy_current_buffer->yy_input_file = yyin; + yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state(); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = yytext_ptr + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++yy_c_buf_p; + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = yy_c_buf_p; + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer() ) + { + case EOB_ACT_END_OF_FILE: + { + yy_did_buffer_switch_on_eof = 0; + + if ( yywrap() ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + yy_c_buf_p = yytext_ptr + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! yy_did_buffer_switch_on_eof ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + yy_c_buf_p = + yytext_ptr + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state(); + + yy_cp = yy_c_buf_p; + yy_bp = yytext_ptr + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + yy_c_buf_p = + &yy_current_buffer->yy_ch_buf[yy_n_chars]; + + yy_current_state = yy_get_previous_state(); + + yy_cp = yy_c_buf_p; + yy_bp = yytext_ptr + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ + } /* end of yylex */ + + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ + +static int yy_get_next_buffer() + { + register char *dest = yy_current_buffer->yy_ch_buf; + register char *source = yytext_ptr; + register int number_to_move, i; + int ret_val; + + if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( yy_current_buffer->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + yy_current_buffer->yy_n_chars = yy_n_chars = 0; + + else + { + int num_to_read = + yy_current_buffer->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ +#ifdef YY_USES_REJECT + YY_FATAL_ERROR( +"input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); +#else + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = yy_current_buffer; + + int yy_c_buf_p_offset = + (int) (yy_c_buf_p - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yy_flex_realloc( (void *) b->yy_ch_buf, + b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = yy_current_buffer->yy_buf_size - + number_to_move - 1; +#endif + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]), + yy_n_chars, num_to_read ); + + yy_current_buffer->yy_n_chars = yy_n_chars; + } + + if ( yy_n_chars == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart( yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + yy_current_buffer->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + yy_n_chars += number_to_move; + yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR; + yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR; + + yytext_ptr = &yy_current_buffer->yy_ch_buf[0]; + + return ret_val; + } + + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + +static yy_state_type yy_get_previous_state() + { + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = yy_start; + + for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + yy_last_accepting_state = yy_current_state; + yy_last_accepting_cpos = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 61 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; + } + + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + +#ifdef YY_USE_PROTOS +static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state ) +#else +static yy_state_type yy_try_NUL_trans( yy_current_state ) +yy_state_type yy_current_state; +#endif + { + register int yy_is_jam; + register char *yy_cp = yy_c_buf_p; + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + yy_last_accepting_state = yy_current_state; + yy_last_accepting_cpos = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 61 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 60); + + return yy_is_jam ? 0 : yy_current_state; + } + + +#ifndef YY_NO_UNPUT +#ifdef YY_USE_PROTOS +static void yyunput( int c, register char *yy_bp ) +#else +static void yyunput( c, yy_bp ) +int c; +register char *yy_bp; +#endif + { + register char *yy_cp = yy_c_buf_p; + + /* undo effects of setting up yytext */ + *yy_cp = yy_hold_char; + + if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 ) + { /* need to shift things up to make room */ + /* +2 for EOB chars. */ + register int number_to_move = yy_n_chars + 2; + register char *dest = &yy_current_buffer->yy_ch_buf[ + yy_current_buffer->yy_buf_size + 2]; + register char *source = + &yy_current_buffer->yy_ch_buf[number_to_move]; + + while ( source > yy_current_buffer->yy_ch_buf ) + *--dest = *--source; + + yy_cp += (int) (dest - source); + yy_bp += (int) (dest - source); + yy_current_buffer->yy_n_chars = + yy_n_chars = yy_current_buffer->yy_buf_size; + + if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 ) + YY_FATAL_ERROR( "flex scanner push-back overflow" ); + } + + *--yy_cp = (char) c; + + + yytext_ptr = yy_bp; + yy_hold_char = *yy_cp; + yy_c_buf_p = yy_cp; + } +#endif /* ifndef YY_NO_UNPUT */ + + +#ifdef __cplusplus +static int yyinput() +#else +static int input() +#endif + { + int c; + + *yy_c_buf_p = yy_hold_char; + + if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] ) + /* This was really a NUL. */ + *yy_c_buf_p = '\0'; + + else + { /* need more input */ + int offset = yy_c_buf_p - yytext_ptr; + ++yy_c_buf_p; + + switch ( yy_get_next_buffer() ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart( yyin ); + + /* fall through */ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap() ) + return EOF; + + if ( ! yy_did_buffer_switch_on_eof ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + yy_c_buf_p = yytext_ptr + offset; + break; + } + } + } + + c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */ + *yy_c_buf_p = '\0'; /* preserve yytext */ + yy_hold_char = *++yy_c_buf_p; + + + return c; + } + + +#ifdef YY_USE_PROTOS +void yyrestart( FILE *input_file ) +#else +void yyrestart( input_file ) +FILE *input_file; +#endif + { + if ( ! yy_current_buffer ) + yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); + + yy_init_buffer( yy_current_buffer, input_file ); + yy_load_buffer_state(); + } + + +#ifdef YY_USE_PROTOS +void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer ) +#else +void yy_switch_to_buffer( new_buffer ) +YY_BUFFER_STATE new_buffer; +#endif + { + if ( yy_current_buffer == new_buffer ) + return; + + if ( yy_current_buffer ) + { + /* Flush out information for old buffer. */ + *yy_c_buf_p = yy_hold_char; + yy_current_buffer->yy_buf_pos = yy_c_buf_p; + yy_current_buffer->yy_n_chars = yy_n_chars; + } + + yy_current_buffer = new_buffer; + yy_load_buffer_state(); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + yy_did_buffer_switch_on_eof = 1; + } + + +#ifdef YY_USE_PROTOS +void yy_load_buffer_state( void ) +#else +void yy_load_buffer_state() +#endif + { + yy_n_chars = yy_current_buffer->yy_n_chars; + yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos; + yyin = yy_current_buffer->yy_input_file; + yy_hold_char = *yy_c_buf_p; + } + + +#ifdef YY_USE_PROTOS +YY_BUFFER_STATE yy_create_buffer( FILE *file, int size ) +#else +YY_BUFFER_STATE yy_create_buffer( file, size ) +FILE *file; +int size; +#endif + { + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer( b, file ); + + return b; + } + + +#ifdef YY_USE_PROTOS +void yy_delete_buffer( YY_BUFFER_STATE b ) +#else +void yy_delete_buffer( b ) +YY_BUFFER_STATE b; +#endif + { + if ( ! b ) + return; + + if ( b == yy_current_buffer ) + yy_current_buffer = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yy_flex_free( (void *) b->yy_ch_buf ); + + yy_flex_free( (void *) b ); + } + + +#ifndef YY_ALWAYS_INTERACTIVE +#ifndef YY_NEVER_INTERACTIVE +extern int isatty YY_PROTO(( int )); +#endif +#endif + +#ifdef YY_USE_PROTOS +void yy_init_buffer( YY_BUFFER_STATE b, FILE *file ) +#else +void yy_init_buffer( b, file ) +YY_BUFFER_STATE b; +FILE *file; +#endif + + + { + yy_flush_buffer( b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + +#if YY_ALWAYS_INTERACTIVE + b->yy_is_interactive = 1; +#else +#if YY_NEVER_INTERACTIVE + b->yy_is_interactive = 0; +#else + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; +#endif +#endif + } + + +#ifdef YY_USE_PROTOS +void yy_flush_buffer( YY_BUFFER_STATE b ) +#else +void yy_flush_buffer( b ) +YY_BUFFER_STATE b; +#endif + + { + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == yy_current_buffer ) + yy_load_buffer_state(); + } + + +#ifndef YY_NO_SCAN_BUFFER +#ifdef YY_USE_PROTOS +YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size ) +#else +YY_BUFFER_STATE yy_scan_buffer( base, size ) +char *base; +yy_size_t size; +#endif + { + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer( b ); + + return b; + } +#endif + + +#ifndef YY_NO_SCAN_STRING +#ifdef YY_USE_PROTOS +YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str ) +#else +YY_BUFFER_STATE yy_scan_string( yy_str ) +yyconst char *yy_str; +#endif + { + int len; + for ( len = 0; yy_str[len]; ++len ) + ; + + return yy_scan_bytes( yy_str, len ); + } +#endif + + +#ifndef YY_NO_SCAN_BYTES +#ifdef YY_USE_PROTOS +YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len ) +#else +YY_BUFFER_STATE yy_scan_bytes( bytes, len ) +yyconst char *bytes; +int len; +#endif + { + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = len + 2; + buf = (char *) yy_flex_alloc( n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < len; ++i ) + buf[i] = bytes[i]; + + buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer( buf, n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; + } +#endif + + +#ifndef YY_NO_PUSH_STATE +#ifdef YY_USE_PROTOS +static void yy_push_state( int new_state ) +#else +static void yy_push_state( new_state ) +int new_state; +#endif + { + if ( yy_start_stack_ptr >= yy_start_stack_depth ) + { + yy_size_t new_size; + + yy_start_stack_depth += YY_START_STACK_INCR; + new_size = yy_start_stack_depth * sizeof( int ); + + if ( ! yy_start_stack ) + yy_start_stack = (int *) yy_flex_alloc( new_size ); + + else + yy_start_stack = (int *) yy_flex_realloc( + (void *) yy_start_stack, new_size ); + + if ( ! yy_start_stack ) + YY_FATAL_ERROR( + "out of memory expanding start-condition stack" ); + } + + yy_start_stack[yy_start_stack_ptr++] = YY_START; + + BEGIN(new_state); + } +#endif + + +#ifndef YY_NO_POP_STATE +static void yy_pop_state() + { + if ( --yy_start_stack_ptr < 0 ) + YY_FATAL_ERROR( "start-condition stack underflow" ); + + BEGIN(yy_start_stack[yy_start_stack_ptr]); + } +#endif + + +#ifndef YY_NO_TOP_STATE +static int yy_top_state() + { + return yy_start_stack[yy_start_stack_ptr - 1]; + } +#endif + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +#ifdef YY_USE_PROTOS +static void yy_fatal_error( yyconst char msg[] ) +#else +static void yy_fatal_error( msg ) +char msg[]; +#endif + { + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); + } + + + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + yytext[yyleng] = yy_hold_char; \ + yy_c_buf_p = yytext + n; \ + yy_hold_char = *yy_c_buf_p; \ + *yy_c_buf_p = '\0'; \ + yyleng = n; \ + } \ + while ( 0 ) + + +/* Internal utility routines. */ + +#ifndef yytext_ptr +#ifdef YY_USE_PROTOS +static void yy_flex_strncpy( char *s1, yyconst char *s2, int n ) +#else +static void yy_flex_strncpy( s1, s2, n ) +char *s1; +yyconst char *s2; +int n; +#endif + { + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; + } +#endif + +#ifdef YY_NEED_STRLEN +#ifdef YY_USE_PROTOS +static int yy_flex_strlen( yyconst char *s ) +#else +static int yy_flex_strlen( s ) +yyconst char *s; +#endif + { + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; + } +#endif + + +#ifdef YY_USE_PROTOS +static void *yy_flex_alloc( yy_size_t size ) +#else +static void *yy_flex_alloc( size ) +yy_size_t size; +#endif + { + return (void *) malloc( size ); + } + +#ifdef YY_USE_PROTOS +static void *yy_flex_realloc( void *ptr, yy_size_t size ) +#else +static void *yy_flex_realloc( ptr, size ) +void *ptr; +yy_size_t size; +#endif + { + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); + } + +#ifdef YY_USE_PROTOS +static void yy_flex_free( void *ptr ) +#else +static void yy_flex_free( ptr ) +void *ptr; +#endif + { + free( ptr ); + } + +#if YY_MAIN +int main() + { + yylex(); + return 0; + } +#endif +#line 26 "lexer.l" + + +void yyerror(char *s) +{ + fprintf(stderr,"Error at Line : %s near %s\n", s, yytext); +} +#if 0 +int main(int argc, char **argv) +{ +int i; + + g_sql = mdb_sql_init(); + yyin = stdin; + if (yyparse()) { + fprintf(stderr, "Couldn't parse SQL\n"); + exit(1); + } + mdb_sql_dump(g_sql); + mdb_sql_exit(g_sql); +} +#endif diff --git a/src/sql/sql.l b/src/sql/lexer.l similarity index 97% rename from src/sql/sql.l rename to src/sql/lexer.l index 1c3ea89..0298347 100644 --- a/src/sql/sql.l +++ b/src/sql/lexer.l @@ -1,7 +1,7 @@ %{ -#include "y.tab.h" #include #include "mdbsql.h" +#include "parser.h" extern MdbSQL *g_sql; %} diff --git a/src/sql/main.c b/src/sql/main.c index 08b46e7..623b234 100644 --- a/src/sql/main.c +++ b/src/sql/main.c @@ -1,5 +1,7 @@ #include -#include +#ifdef HAVE_READLINE +#include +#endif #include #include "mdbsql.h" @@ -7,6 +9,30 @@ extern MdbSQL *g_sql; char *g_input_ptr; +#ifndef HAVE_READLINE +char *readline(char *prompt) +{ +char *buf, line[1000]; +int i = 0; + + printf("%s",prompt); + fgets(line,1000,stdin); + for (i=strlen(line);i>0;i--) { + if (line[i]=='\n') { + line[i]='\0'; + break; + } + } + buf = (char *) malloc(strlen(line)+1); + strcpy(buf,line); + + return buf; +} +add_history(char *s) +{ +} +#endif + int mdb_sql_yyinput(char *buf, int need) { int cplen, have; diff --git a/src/sql/mdbsql.h b/src/sql/mdbsql.h deleted file mode 100644 index 269b876..0000000 --- a/src/sql/mdbsql.h +++ /dev/null @@ -1,48 +0,0 @@ -#include -#include -#include -#include - -typedef struct { - MdbHandle *mdb; - int all_columns; - int num_columns; - GPtrArray *columns; - int num_tables; - GPtrArray *tables; - int num_sargs; - GPtrArray *sargs; -} MdbSQL; - -typedef struct { - char *name; - int disp_size; -} MdbSQLColumn; - -typedef struct { - char *name; - char *alias; -} MdbSQLTable; - -typedef struct { - char *col_name; - MdbSarg *sarg; -} MdbSQLSarg; - -#undef YY_INPUT -#define YY_INPUT(b, r, ms) (r = mdb_sql_yyinput(b, ms)); - -MdbSQL *mdb_sql_init(); -MdbSQLSarg *mdb_sql_alloc_sarg(); -MdbSQLColumn *mdb_sql_alloc_column(); -MdbSQLTable *mdb_sql_alloc_table(); -MdbHandle *mdb_sql_open(MdbSQL *sql, char *db_name); -int mdb_sql_add_sarg(MdbSQL *sql, char *col_name, int op, char *constant); -int mdb_sql_all_columns(MdbSQL *sql); -int mdb_sql_add_column(MdbSQL *sql, char *column_name); -int mdb_sql_add_table(MdbSQL *sql, char *table_name); -void mdb_sql_dump(MdbSQL *sql); -void mdb_sql_exit(MdbSQL *sql); -void mdb_sql_reset(MdbSQL *sql); -void mdb_sql_listtables(MdbSQL *sql); -void mdb_sql_select(MdbSQL *sql); diff --git a/src/sql/parser.c b/src/sql/parser.c new file mode 100644 index 0000000..57712e6 --- /dev/null +++ b/src/sql/parser.c @@ -0,0 +1,443 @@ +#ifndef lint +static char yysccsid[] = "@(#)yaccpar 1.9 (Berkeley) 02/21/93"; +#endif +#define YYBYACC 1 +#define YYMAJOR 1 +#define YYMINOR 9 +#define yyclearin (yychar=(-1)) +#define yyerrok (yyerrflag=0) +#define YYRECOVERING (yyerrflag!=0) +#define YYPREFIX "yy" +#line 2 "parser.y" +#include "mdbsql.h" + +MdbSQL *g_sql; +#line 7 "parser.y" +typedef union { + char *name; + double dval; + int ival; +} YYSTYPE; +#line 22 "y.tab.c" +#define NAME 257 +#define PATH 258 +#define NUMBER 259 +#define STRING 260 +#define SELECT 261 +#define FROM 262 +#define WHERE 263 +#define CONNECT 264 +#define TO 265 +#define LIST 266 +#define TABLES 267 +#define AND 268 +#define YYERRCODE 256 +short yylhs[] = { -1, + 0, 0, 0, 3, 3, 5, 5, 6, 6, 7, + 7, 7, 8, 8, 4, 4, 2, 1, 1, 1, + 9, +}; +short yylen[] = { 2, + 5, 3, 2, 0, 2, 1, 3, 3, 3, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 3, + 1, +}; +short yydefred[] = { 0, + 0, 0, 0, 0, 21, 18, 0, 0, 0, 3, + 0, 0, 16, 15, 2, 17, 0, 20, 0, 1, + 0, 13, 14, 5, 0, 0, 10, 11, 12, 0, + 0, 0, 8, 7, 9, +}; +short yydgoto[] = { 4, + 7, 17, 20, 15, 24, 25, 30, 26, 8, +}; +short yysindex[] = { -260, + -42, -251, -250, 0, 0, 0, -246, -29, -255, 0, + -239, -42, 0, 0, 0, 0, -244, 0, -252, 0, + -51, 0, 0, 0, -248, -51, 0, 0, 0, -247, + -252, -236, 0, 0, 0, +}; +short yyrindex[] = { 0, + 0, 0, 0, 0, 0, 0, 0, -240, 0, 0, + 0, 0, 0, 0, 0, 0, 23, 0, 0, 0, + 0, 0, 0, 0, 24, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, +}; +short yygindex[] = { 0, + 13, 0, 0, 0, -5, 0, 1, -2, 0, +}; +#define YYTABLESIZE 215 +short yytable[] = { 6, + 1, 13, 14, 2, 21, 3, 22, 23, 29, 27, + 28, 22, 23, 9, 12, 11, 10, 16, 19, 31, + 35, 19, 4, 6, 18, 34, 32, 33, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 5, +}; +short yycheck[] = { 42, + 261, 257, 258, 264, 257, 266, 259, 260, 60, 61, + 62, 259, 260, 265, 44, 262, 267, 257, 263, 268, + 257, 262, 0, 0, 12, 31, 26, 30, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, 257, +}; +#define YYFINAL 4 +#ifndef YYDEBUG +#define YYDEBUG 0 +#endif +#define YYMAXTOKEN 268 +#if YYDEBUG +char *yyname[] = { +"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,"'*'",0,"','",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"'<'","'='","'>'",0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"NAME","PATH", +"NUMBER","STRING","SELECT","FROM","WHERE","CONNECT","TO","LIST","TABLES","AND", +}; +char *yyrule[] = { +"$accept : query", +"query : SELECT column_list FROM table where_clause", +"query : CONNECT TO database", +"query : LIST TABLES", +"where_clause :", +"where_clause : WHERE sarg_list", +"sarg_list : sarg", +"sarg_list : sarg AND sarg_list", +"sarg : NAME operator constant", +"sarg : constant operator NAME", +"operator : '='", +"operator : '>'", +"operator : '<'", +"constant : NUMBER", +"constant : STRING", +"database : PATH", +"database : NAME", +"table : NAME", +"column_list : '*'", +"column_list : column", +"column_list : column ',' column_list", +"column : NAME", +}; +#endif +#ifdef YYSTACKSIZE +#undef YYMAXDEPTH +#define YYMAXDEPTH YYSTACKSIZE +#else +#ifdef YYMAXDEPTH +#define YYSTACKSIZE YYMAXDEPTH +#else +#define YYSTACKSIZE 500 +#define YYMAXDEPTH 500 +#endif +#endif +int yydebug; +int yynerrs; +int yyerrflag; +int yychar; +short *yyssp; +YYSTYPE *yyvsp; +YYSTYPE yyval; +YYSTYPE yylval; +short yyss[YYSTACKSIZE]; +YYSTYPE yyvs[YYSTACKSIZE]; +#define yystacksize YYSTACKSIZE +#define YYABORT goto yyabort +#define YYREJECT goto yyabort +#define YYACCEPT goto yyaccept +#define YYERROR goto yyerrlab +int +yyparse() +{ + register int yym, yyn, yystate; +#if YYDEBUG + register char *yys; + extern char *getenv(); + + if (yys = getenv("YYDEBUG")) + { + yyn = *yys; + if (yyn >= '0' && yyn <= '9') + yydebug = yyn - '0'; + } +#endif + + yynerrs = 0; + yyerrflag = 0; + yychar = (-1); + + yyssp = yyss; + yyvsp = yyvs; + *yyssp = yystate = 0; + +yyloop: + if (yyn = yydefred[yystate]) goto yyreduce; + if (yychar < 0) + { + if ((yychar = yylex()) < 0) yychar = 0; +#if YYDEBUG + if (yydebug) + { + yys = 0; + if (yychar <= YYMAXTOKEN) yys = yyname[yychar]; + if (!yys) yys = "illegal-symbol"; + printf("%sdebug: state %d, reading %d (%s)\n", + YYPREFIX, yystate, yychar, yys); + } +#endif + } + if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 && + yyn <= YYTABLESIZE && yycheck[yyn] == yychar) + { +#if YYDEBUG + if (yydebug) + printf("%sdebug: state %d, shifting to state %d\n", + YYPREFIX, yystate, yytable[yyn]); +#endif + if (yyssp >= yyss + yystacksize - 1) + { + goto yyoverflow; + } + *++yyssp = yystate = yytable[yyn]; + *++yyvsp = yylval; + yychar = (-1); + if (yyerrflag > 0) --yyerrflag; + goto yyloop; + } + if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 && + yyn <= YYTABLESIZE && yycheck[yyn] == yychar) + { + yyn = yytable[yyn]; + goto yyreduce; + } + if (yyerrflag) goto yyinrecovery; +#ifdef lint + goto yynewerror; +#endif +yynewerror: + yyerror("syntax error"); +#ifdef lint + goto yyerrlab; +#endif +yyerrlab: + ++yynerrs; +yyinrecovery: + if (yyerrflag < 3) + { + yyerrflag = 3; + for (;;) + { + if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 && + yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE) + { +#if YYDEBUG + if (yydebug) + printf("%sdebug: state %d, error recovery shifting\ + to state %d\n", YYPREFIX, *yyssp, yytable[yyn]); +#endif + if (yyssp >= yyss + yystacksize - 1) + { + goto yyoverflow; + } + *++yyssp = yystate = yytable[yyn]; + *++yyvsp = yylval; + goto yyloop; + } + else + { +#if YYDEBUG + if (yydebug) + printf("%sdebug: error recovery discarding state %d\n", + YYPREFIX, *yyssp); +#endif + if (yyssp <= yyss) goto yyabort; + --yyssp; + --yyvsp; + } + } + } + else + { + if (yychar == 0) goto yyabort; +#if YYDEBUG + if (yydebug) + { + yys = 0; + if (yychar <= YYMAXTOKEN) yys = yyname[yychar]; + if (!yys) yys = "illegal-symbol"; + printf("%sdebug: state %d, error recovery discards token %d (%s)\n", + YYPREFIX, yystate, yychar, yys); + } +#endif + yychar = (-1); + goto yyloop; + } +yyreduce: +#if YYDEBUG + if (yydebug) + printf("%sdebug: state %d, reducing by rule %d (%s)\n", + YYPREFIX, yystate, yyn, yyrule[yyn]); +#endif + yym = yylen[yyn]; + yyval = yyvsp[1-yym]; + switch (yyn) + { +case 1: +#line 19 "parser.y" +{ + mdb_sql_select(g_sql); + } +break; +case 2: +#line 22 "parser.y" +{ + mdb_sql_open(g_sql, yyvsp[0].name); free(yyvsp[0].name); + } +break; +case 3: +#line 25 "parser.y" +{ + mdb_sql_listtables(g_sql); + } +break; +case 8: +#line 41 "parser.y" +{ + mdb_sql_add_sarg(g_sql, yyvsp[-2].name, yyvsp[-1].ival, yyvsp[0].name); + free(yyvsp[-2].name); + free(yyvsp[0].name); + } +break; +case 9: +#line 46 "parser.y" +{ + mdb_sql_add_sarg(g_sql, yyvsp[0].name, yyvsp[-1].ival, yyvsp[-2].name); + free(yyvsp[-2].name); + free(yyvsp[0].name); + } +break; +case 10: +#line 54 "parser.y" +{ yyval.ival = MDB_EQUAL; } +break; +case 11: +#line 55 "parser.y" +{ yyval.ival = MDB_GT; } +break; +case 12: +#line 56 "parser.y" +{ yyval.ival = MDB_LT; } +break; +case 13: +#line 59 "parser.y" +{ yyval.name = yyvsp[0].name; } +break; +case 14: +#line 60 "parser.y" +{ yyval.name = yyvsp[0].name; } +break; +case 17: +#line 68 "parser.y" +{ mdb_sql_add_table(g_sql, yyvsp[0].name); free(yyvsp[0].name); } +break; +case 18: +#line 72 "parser.y" +{ mdb_sql_all_columns(g_sql); } +break; +case 21: +#line 78 "parser.y" +{ mdb_sql_add_column(g_sql, yyvsp[0].name); free(yyvsp[0].name); } +break; +#line 388 "y.tab.c" + } + yyssp -= yym; + yystate = *yyssp; + yyvsp -= yym; + yym = yylhs[yyn]; + if (yystate == 0 && yym == 0) + { +#if YYDEBUG + if (yydebug) + printf("%sdebug: after reduction, shifting from state 0 to\ + state %d\n", YYPREFIX, YYFINAL); +#endif + yystate = YYFINAL; + *++yyssp = YYFINAL; + *++yyvsp = yyval; + if (yychar < 0) + { + if ((yychar = yylex()) < 0) yychar = 0; +#if YYDEBUG + if (yydebug) + { + yys = 0; + if (yychar <= YYMAXTOKEN) yys = yyname[yychar]; + if (!yys) yys = "illegal-symbol"; + printf("%sdebug: state %d, reading %d (%s)\n", + YYPREFIX, YYFINAL, yychar, yys); + } +#endif + } + if (yychar == 0) goto yyaccept; + goto yyloop; + } + if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 && + yyn <= YYTABLESIZE && yycheck[yyn] == yystate) + yystate = yytable[yyn]; + else + yystate = yydgoto[yym]; +#if YYDEBUG + if (yydebug) + printf("%sdebug: after reduction, shifting from state %d \ +to state %d\n", YYPREFIX, *yyssp, yystate); +#endif + if (yyssp >= yyss + yystacksize - 1) + { + goto yyoverflow; + } + *++yyssp = yystate; + *++yyvsp = yyval; + goto yyloop; +yyoverflow: + yyerror("yacc stack overflow"); +yyabort: + return (1); +yyaccept: + return (0); +} diff --git a/src/sql/parser.h b/src/sql/parser.h new file mode 100644 index 0000000..f90404a --- /dev/null +++ b/src/sql/parser.h @@ -0,0 +1,18 @@ +#define NAME 257 +#define PATH 258 +#define NUMBER 259 +#define STRING 260 +#define SELECT 261 +#define FROM 262 +#define WHERE 263 +#define CONNECT 264 +#define TO 265 +#define LIST 266 +#define TABLES 267 +#define AND 268 +typedef union { + char *name; + double dval; + int ival; +} YYSTYPE; +extern YYSTYPE yylval; diff --git a/src/sql/sql.y b/src/sql/parser.y similarity index 100% rename from src/sql/sql.y rename to src/sql/parser.y diff --git a/src/util/Makefile b/src/util/Makefile new file mode 100644 index 0000000..237ea46 --- /dev/null +++ b/src/util/Makefile @@ -0,0 +1,437 @@ +# Generated automatically from Makefile.in by configure. +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = /bin/sh + +srcdir = . +top_srcdir = ../.. +prefix = /usr/local +exec_prefix = ${prefix} + +bindir = ${exec_prefix}/bin +sbindir = ${exec_prefix}/sbin +libexecdir = ${exec_prefix}/libexec +datadir = ${prefix}/share +sysconfdir = ${prefix}/etc +sharedstatedir = ${prefix}/com +localstatedir = ${prefix}/var +libdir = ${exec_prefix}/lib +infodir = ${prefix}/info +mandir = ${prefix}/man +includedir = ${prefix}/include +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/mdbtools +pkglibdir = $(libdir)/mdbtools +pkgincludedir = $(includedir)/mdbtools + +top_builddir = ../.. + +ACLOCAL = aclocal +AUTOCONF = autoconf +AUTOMAKE = automake +AUTOHEADER = autoheader + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +transform = s,x,x, + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = i686-pc-linux-gnu +host_triplet = i686-pc-linux-gnu +AS = @AS@ +CC = gcc +DLLTOOL = @DLLTOOL@ +LD = /usr/bin/ld +LEX = flex +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LN_S = ln -s +MAKEINFO = makeinfo +NM = /usr/bin/nm -B +OBJDUMP = @OBJDUMP@ +PACKAGE = mdbtools +RANLIB = ranlib +READLINE_LIBS = -lncurses -lreadline +VERSION = 0.3 +YACC = bison -y + +bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir) +CPPFLAGS = +LDFLAGS = +mdb_export_SOURCES = mdb-export.c +mdb_export_OBJECTS = mdb-export.o +mdb_export_LDADD = $(LDADD) +mdb_export_DEPENDENCIES = ../libmdb/libmdb.la +mdb_export_LDFLAGS = +mdb_array_SOURCES = mdb-array.c +mdb_array_OBJECTS = mdb-array.o +mdb_array_LDADD = $(LDADD) +mdb_array_DEPENDENCIES = ../libmdb/libmdb.la +mdb_array_LDFLAGS = +mdb_schema_SOURCES = mdb-schema.c +mdb_schema_OBJECTS = mdb-schema.o +mdb_schema_LDADD = $(LDADD) +mdb_schema_DEPENDENCIES = ../libmdb/libmdb.la +mdb_schema_LDFLAGS = +mdb_tables_SOURCES = mdb-tables.c +mdb_tables_OBJECTS = mdb-tables.o +mdb_tables_LDADD = $(LDADD) +mdb_tables_DEPENDENCIES = ../libmdb/libmdb.la +mdb_tables_LDFLAGS = +mdb_parsecsv_SOURCES = mdb-parsecsv.c +mdb_parsecsv_OBJECTS = mdb-parsecsv.o +mdb_parsecsv_LDADD = $(LDADD) +mdb_parsecsv_DEPENDENCIES = ../libmdb/libmdb.la +mdb_parsecsv_LDFLAGS = +mdb_header_SOURCES = mdb-header.c +mdb_header_OBJECTS = mdb-header.o +mdb_header_LDADD = $(LDADD) +mdb_header_DEPENDENCIES = ../libmdb/libmdb.la +mdb_header_LDFLAGS = +prtable_SOURCES = prtable.c +prtable_OBJECTS = prtable.o +prtable_LDADD = $(LDADD) +prtable_DEPENDENCIES = ../libmdb/libmdb.la +prtable_LDFLAGS = +prcat_SOURCES = prcat.c +prcat_OBJECTS = prcat.o +prcat_LDADD = $(LDADD) +prcat_DEPENDENCIES = ../libmdb/libmdb.la +prcat_LDFLAGS = +prdata_SOURCES = prdata.c +prdata_OBJECTS = prdata.o +prdata_LDADD = $(LDADD) +prdata_DEPENDENCIES = ../libmdb/libmdb.la +prdata_LDFLAGS = +prkkd_SOURCES = prkkd.c +prkkd_OBJECTS = prkkd.o +prkkd_LDADD = $(LDADD) +prkkd_DEPENDENCIES = ../libmdb/libmdb.la +prkkd_LDFLAGS = +prdump_SOURCES = prdump.c +prdump_OBJECTS = prdump.o +prdump_LDADD = $(LDADD) +prdump_DEPENDENCIES = ../libmdb/libmdb.la +prdump_LDFLAGS = +CFLAGS = -g -O2 +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/mdb-array.P .deps/mdb-export.P .deps/mdb-header.P \ +.deps/mdb-parsecsv.P .deps/mdb-schema.P .deps/mdb-tables.P \ +.deps/prcat.P .deps/prdata.P .deps/prdump.P .deps/prkkd.P \ +.deps/prtable.P +SOURCES = mdb-export.c mdb-array.c mdb-schema.c mdb-tables.c mdb-parsecsv.c mdb-header.c prtable.c prcat.c prdata.c prkkd.c prdump.c +OBJECTS = mdb-export.o mdb-array.o mdb-schema.o mdb-tables.o mdb-parsecsv.o mdb-header.o prtable.o prcat.o prdata.o prkkd.o prdump.o + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/util/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-export: $(mdb_export_OBJECTS) $(mdb_export_DEPENDENCIES) + @rm -f mdb-export + $(LINK) $(mdb_export_LDFLAGS) $(mdb_export_OBJECTS) $(mdb_export_LDADD) $(LIBS) + +mdb-array: $(mdb_array_OBJECTS) $(mdb_array_DEPENDENCIES) + @rm -f mdb-array + $(LINK) $(mdb_array_LDFLAGS) $(mdb_array_OBJECTS) $(mdb_array_LDADD) $(LIBS) + +mdb-schema: $(mdb_schema_OBJECTS) $(mdb_schema_DEPENDENCIES) + @rm -f mdb-schema + $(LINK) $(mdb_schema_LDFLAGS) $(mdb_schema_OBJECTS) $(mdb_schema_LDADD) $(LIBS) + +mdb-tables: $(mdb_tables_OBJECTS) $(mdb_tables_DEPENDENCIES) + @rm -f mdb-tables + $(LINK) $(mdb_tables_LDFLAGS) $(mdb_tables_OBJECTS) $(mdb_tables_LDADD) $(LIBS) + +mdb-parsecsv: $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_DEPENDENCIES) + @rm -f mdb-parsecsv + $(LINK) $(mdb_parsecsv_LDFLAGS) $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_LDADD) $(LIBS) + +mdb-header: $(mdb_header_OBJECTS) $(mdb_header_DEPENDENCIES) + @rm -f mdb-header + $(LINK) $(mdb_header_LDFLAGS) $(mdb_header_OBJECTS) $(mdb_header_LDADD) $(LIBS) + +prtable: $(prtable_OBJECTS) $(prtable_DEPENDENCIES) + @rm -f prtable + $(LINK) $(prtable_LDFLAGS) $(prtable_OBJECTS) $(prtable_LDADD) $(LIBS) + +prcat: $(prcat_OBJECTS) $(prcat_DEPENDENCIES) + @rm -f prcat + $(LINK) $(prcat_LDFLAGS) $(prcat_OBJECTS) $(prcat_LDADD) $(LIBS) + +prdata: $(prdata_OBJECTS) $(prdata_DEPENDENCIES) + @rm -f prdata + $(LINK) $(prdata_LDFLAGS) $(prdata_OBJECTS) $(prdata_LDADD) $(LIBS) + +prkkd: $(prkkd_OBJECTS) $(prkkd_DEPENDENCIES) + @rm -f prkkd + $(LINK) $(prkkd_LDFLAGS) $(prkkd_OBJECTS) $(prkkd_LDADD) $(LIBS) + +prdump: $(prdump_OBJECTS) $(prdump_DEPENDENCIES) + @rm -f prdump + $(LINK) $(prdump_LDFLAGS) $(prdump_OBJECTS) $(prdump_LDADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/util + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/util/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/util/Makefile.am b/src/util/Makefile.am new file mode 100644 index 0000000..90a3b44 --- /dev/null +++ b/src/util/Makefile.am @@ -0,0 +1,4 @@ +bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` diff --git a/src/util/Makefile.in b/src/util/Makefile.in index b33c768..af13fe6 100644 --- a/src/util/Makefile.in +++ b/src/util/Makefile.in @@ -1,100 +1,437 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am -SHELL = /bin/sh -VPATH = @srcdir@ +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ -top_srcdir = @top_srcdir@ srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ -bindir = $(exec_prefix)/bin -infodir = $(exec_prefix)/info -libdir = $(exec_prefix)/lib -mandir = $(exec_prefix)/man/man1 +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AS = @AS@ CC = @CC@ +DLLTOOL = @DLLTOOL@ +LD = @LD@ +LEX = @LEX@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAKEINFO = @MAKEINFO@ +NM = @NM@ +OBJDUMP = @OBJDUMP@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +VERSION = @VERSION@ +YACC = @YACC@ + +bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump +INCLUDES = -I$(top_srcdir)/include `glib-config --cflags` +LDADD = ../libmdb/libmdb.la +LIBS = `glib-config --libs` +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = @DEFS@ -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ -CFLAGS = $(CPPFLAG) @CFLAGS@ LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -INSTALL= @INSTALL@ -INC = -I ../include `glib-config --cflags` -MDBLIB = ../libmdb/libmdb.a -LIBS = -L ../libmdb -lmdb `glib-config --libs` -PROGS = prcat prkkd prtable prdata prdump mdb-schema mdb-export mdb-tables mdb-header mdb-parsecsv mdb-array -PRCATOBJS = prcat.o -PRKKDOBJS = prkkd.o -PRTABLEOBJS = prtable.o -PRDATAOBJS = prdata.o -PRDUMPOBJS = prdump.o -SCHEMAOBJS = schema.o -EXPORTOBJS = mdb-export.o -HEADEROBJS = header.o -TABLEOBJS = tables.o -CSVOBJS = parsecsv.o -ARROBJS = mdb-array.o +mdb_export_SOURCES = mdb-export.c +mdb_export_OBJECTS = mdb-export.o +mdb_export_LDADD = $(LDADD) +mdb_export_DEPENDENCIES = ../libmdb/libmdb.la +mdb_export_LDFLAGS = +mdb_array_SOURCES = mdb-array.c +mdb_array_OBJECTS = mdb-array.o +mdb_array_LDADD = $(LDADD) +mdb_array_DEPENDENCIES = ../libmdb/libmdb.la +mdb_array_LDFLAGS = +mdb_schema_SOURCES = mdb-schema.c +mdb_schema_OBJECTS = mdb-schema.o +mdb_schema_LDADD = $(LDADD) +mdb_schema_DEPENDENCIES = ../libmdb/libmdb.la +mdb_schema_LDFLAGS = +mdb_tables_SOURCES = mdb-tables.c +mdb_tables_OBJECTS = mdb-tables.o +mdb_tables_LDADD = $(LDADD) +mdb_tables_DEPENDENCIES = ../libmdb/libmdb.la +mdb_tables_LDFLAGS = +mdb_parsecsv_SOURCES = mdb-parsecsv.c +mdb_parsecsv_OBJECTS = mdb-parsecsv.o +mdb_parsecsv_LDADD = $(LDADD) +mdb_parsecsv_DEPENDENCIES = ../libmdb/libmdb.la +mdb_parsecsv_LDFLAGS = +mdb_header_SOURCES = mdb-header.c +mdb_header_OBJECTS = mdb-header.o +mdb_header_LDADD = $(LDADD) +mdb_header_DEPENDENCIES = ../libmdb/libmdb.la +mdb_header_LDFLAGS = +prtable_SOURCES = prtable.c +prtable_OBJECTS = prtable.o +prtable_LDADD = $(LDADD) +prtable_DEPENDENCIES = ../libmdb/libmdb.la +prtable_LDFLAGS = +prcat_SOURCES = prcat.c +prcat_OBJECTS = prcat.o +prcat_LDADD = $(LDADD) +prcat_DEPENDENCIES = ../libmdb/libmdb.la +prcat_LDFLAGS = +prdata_SOURCES = prdata.c +prdata_OBJECTS = prdata.o +prdata_LDADD = $(LDADD) +prdata_DEPENDENCIES = ../libmdb/libmdb.la +prdata_LDFLAGS = +prkkd_SOURCES = prkkd.c +prkkd_OBJECTS = prkkd.o +prkkd_LDADD = $(LDADD) +prkkd_DEPENDENCIES = ../libmdb/libmdb.la +prkkd_LDFLAGS = +prdump_SOURCES = prdump.c +prdump_OBJECTS = prdump.o +prdump_LDADD = $(LDADD) +prdump_DEPENDENCIES = ../libmdb/libmdb.la +prdump_LDFLAGS = +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: $(PROGS) -prcat: $(PRCATOBJS) $(MDBLIB) - $(CC) -g -o $@ $(PRCATOBJS) $(LIBS) - -prkkd: $(PRKKDOBJS) $(MDBLIB) - $(CC) -g -o $@ $(PRKKDOBJS) $(LIBS) - -prtable: $(PRTABLEOBJS) $(MDBLIB) - $(CC) -g -o $@ $(PRTABLEOBJS) $(LIBS) - -prdata: $(PRDATAOBJS) $(MDBLIB) - $(CC) -g -o $@ $(PRDATAOBJS) $(LIBS) - -prdump: $(PRDUMPOBJS) $(MDBLIB) - $(CC) -g -o $@ $(PRDUMPOBJS) $(LIBS) +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -mdb-schema: $(SCHEMAOBJS) $(MDBLIB) - $(CC) -g -o $@ $(SCHEMAOBJS) $(LIBS) +TAR = gtar +GZIP_ENV = --best +DEP_FILES = .deps/mdb-array.P .deps/mdb-export.P .deps/mdb-header.P \ +.deps/mdb-parsecsv.P .deps/mdb-schema.P .deps/mdb-tables.P \ +.deps/prcat.P .deps/prdata.P .deps/prdump.P .deps/prkkd.P \ +.deps/prtable.P +SOURCES = mdb-export.c mdb-array.c mdb-schema.c mdb-tables.c mdb-parsecsv.c mdb-header.c prtable.c prcat.c prdata.c prkkd.c prdump.c +OBJECTS = mdb-export.o mdb-array.o mdb-schema.o mdb-tables.o mdb-parsecsv.o mdb-header.o prtable.o prcat.o prdata.o prkkd.o prdump.o -mdb-export: $(EXPORTOBJS) $(MDBLIB) - $(CC) -g -o $@ $(EXPORTOBJS) $(LIBS) +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/util/Makefile -mdb-tables: $(TABLEOBJS) $(MDBLIB) - $(CC) -g -o $@ $(TABLEOBJS) $(LIBS) +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -mdb-header: $(HEADEROBJS) $(MDBLIB) - $(CC) -g -o $@ $(HEADEROBJS) $(LIBS) -mdb-parsecsv: $(CSVOBJS) $(MDBLIB) - $(CC) -g -o $@ $(CSVOBJS) $(LIBS) +mostlyclean-binPROGRAMS: -mdb-array: $(ARROBJS) $(MDBLIB) - $(CC) -g -o $@ $(ARROBJS) $(LIBS) +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) -clean: - rm -f core *.o $(PROGS) +distclean-binPROGRAMS: -.c.o: - $(CC) $(CFLAGS) -g -c $< $(INC) +maintainer-clean-binPROGRAMS: -install: - @for prog in $(PROGS); do \ - echo " copying $$prog to $(bindir)"; \ - cp $$prog $(bindir); \ - done +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done -uninstall: - @for prog in $(PROGS); do \ - echo " removing $$prog from $(bindir)"; \ - rm -f $(bindir)/$$prog; \ - done +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done -header.o: header.c ../include/mdbtools.h -mdb-array.o: mdb-array.c ../include/mdbtools.h -mdb-export.o: mdb-export.c ../include/mdbtools.h -parsecsv.o: parsecsv.c ../include/mdbtools.h -prcat.o: prcat.c ../include/mdbtools.h -prdata.o: prdata.c ../include/mdbtools.h -prdump.o: prdump.c ../include/mdbtools.h -prkkd.o: prkkd.c ../include/mdbtools.h -prtable.o: prtable.c ../include/mdbtools.h -schema.o: schema.c ../include/mdbtools.h -tables.o: tables.c ../include/mdbtools.h +.s.o: + $(COMPILE) -c $< +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + +maintainer-clean-libtool: + +mdb-export: $(mdb_export_OBJECTS) $(mdb_export_DEPENDENCIES) + @rm -f mdb-export + $(LINK) $(mdb_export_LDFLAGS) $(mdb_export_OBJECTS) $(mdb_export_LDADD) $(LIBS) + +mdb-array: $(mdb_array_OBJECTS) $(mdb_array_DEPENDENCIES) + @rm -f mdb-array + $(LINK) $(mdb_array_LDFLAGS) $(mdb_array_OBJECTS) $(mdb_array_LDADD) $(LIBS) + +mdb-schema: $(mdb_schema_OBJECTS) $(mdb_schema_DEPENDENCIES) + @rm -f mdb-schema + $(LINK) $(mdb_schema_LDFLAGS) $(mdb_schema_OBJECTS) $(mdb_schema_LDADD) $(LIBS) + +mdb-tables: $(mdb_tables_OBJECTS) $(mdb_tables_DEPENDENCIES) + @rm -f mdb-tables + $(LINK) $(mdb_tables_LDFLAGS) $(mdb_tables_OBJECTS) $(mdb_tables_LDADD) $(LIBS) + +mdb-parsecsv: $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_DEPENDENCIES) + @rm -f mdb-parsecsv + $(LINK) $(mdb_parsecsv_LDFLAGS) $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_LDADD) $(LIBS) + +mdb-header: $(mdb_header_OBJECTS) $(mdb_header_DEPENDENCIES) + @rm -f mdb-header + $(LINK) $(mdb_header_LDFLAGS) $(mdb_header_OBJECTS) $(mdb_header_LDADD) $(LIBS) + +prtable: $(prtable_OBJECTS) $(prtable_DEPENDENCIES) + @rm -f prtable + $(LINK) $(prtable_LDFLAGS) $(prtable_OBJECTS) $(prtable_LDADD) $(LIBS) + +prcat: $(prcat_OBJECTS) $(prcat_DEPENDENCIES) + @rm -f prcat + $(LINK) $(prcat_LDFLAGS) $(prcat_OBJECTS) $(prcat_LDADD) $(LIBS) + +prdata: $(prdata_OBJECTS) $(prdata_DEPENDENCIES) + @rm -f prdata + $(LINK) $(prdata_LDFLAGS) $(prdata_OBJECTS) $(prdata_LDADD) $(LIBS) + +prkkd: $(prkkd_OBJECTS) $(prkkd_DEPENDENCIES) + @rm -f prkkd + $(LINK) $(prkkd_LDFLAGS) $(prkkd_OBJECTS) $(prkkd_LDADD) $(LIBS) + +prdump: $(prdump_OBJECTS) $(prdump_DEPENDENCIES) + @rm -f prdump + $(LINK) $(prdump_LDFLAGS) $(prdump_OBJECTS) $(prdump_LDADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/util + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/util/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/util/header.c b/src/util/mdb-header.c similarity index 100% rename from src/util/header.c rename to src/util/mdb-header.c diff --git a/src/util/parsecsv.c b/src/util/mdb-parsecsv.c similarity index 100% rename from src/util/parsecsv.c rename to src/util/mdb-parsecsv.c diff --git a/src/util/schema.c b/src/util/mdb-schema.c similarity index 100% rename from src/util/schema.c rename to src/util/mdb-schema.c diff --git a/src/util/tables.c b/src/util/mdb-tables.c similarity index 100% rename from src/util/tables.c rename to src/util/mdb-tables.c diff --git a/src/util/sargtest.c b/src/util/sargtest.c new file mode 100644 index 0000000..85c3504 --- /dev/null +++ b/src/util/sargtest.c @@ -0,0 +1,104 @@ +/* MDB Tools - A library for reading MS Access database file + * Copyright (C) 2000 Brian Bruns + * + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + * + * You should have received a copy of the GNU Library General Public + * License along with this library; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + */ + +#include "mdbtools.h" + +#define TABLE_NAME "Orders" +#define MDB_FILE "Northwind.mdb" +#define DELIMETER "\t" + +void print_table(MdbTableDef *table); + +main(int argc, char **argv) +{ +int rows; +int i; +unsigned char buf[2048]; +MdbHandle *mdb; +MdbCatalogEntry entry; +MdbTableDef *table; + + mdb_init(); + + if (!(mdb = mdb_open(MDB_FILE))) { + exit(1); + } + + mdb_read_catalog(mdb, MDB_TABLE); + + for (i=0;inum_catalog;i++) { + entry = g_array_index(mdb->catalog,MdbCatalogEntry,i); + if (entry.object_type == MDB_TABLE && + !strcmp(entry.object_name,TABLE_NAME)) { + table = mdb_read_table(&entry); + print_table(table); + } + } + + mdb_free_handle(mdb); + mdb_exit(); +} + +void print_table(MdbTableDef *table) +{ +int j; +/* doesn't handle tables > 256 columns. Can that happen? */ +char *bound_values[256]; +MdbColumn *col; +MdbSarg sarg; + + mdb_read_columns(table); + + sarg.op = MDB_GTEQ; + sarg.value.i = 11070; + mdb_add_sarg_by_name(table, "OrderID", &sarg); + + mdb_rewind_table(table); + + for (j=0;jnum_cols;j++) { + bound_values[j] = (char *) malloc(MDB_BIND_SIZE); + bound_values[j][0] = '\0'; + mdb_bind_column(table, j+1, bound_values[j]); + } + + /* print header */ + col=g_ptr_array_index(table->columns,0); + fprintf(stdout,"%s",col->name); + for (j=1;jnum_cols;j++) { + col=g_ptr_array_index(table->columns,j); + fprintf(stdout,"%s%s",DELIMETER,col->name); + } + fprintf(stdout,"\n"); + + /* print each row */ + while(mdb_fetch_row(table)) { + fprintf(stdout,"%s",bound_values[0]); + for (j=1;jnum_cols;j++) { + col=g_ptr_array_index(table->columns,j); + fprintf(stdout,"%s%s",DELIMETER,bound_values[j]); + } + fprintf(stdout,"\n"); + } + + /* clean up */ + for (j=0;jnum_cols;j++) { + free(bound_values[j]); + } +}