diff --git a/ChangeLog b/ChangeLog index 5eed1d2..a65b497 100644 --- a/ChangeLog +++ b/ChangeLog @@ -4,7 +4,7 @@ Tue Apr 2 21:02:13 EST 2002 Brian Bruns Wed Mar 20 22:49:33 EST 2002 Brian Bruns - * include/mdbtools.h: increased page size for 2048 to 4096 + * include/mdbtools.h: increased page size from 2048 to 4096 Sat Mar 16 21:37:01 EST 2002 Brian Bruns diff --git a/HACKING b/HACKING index 53a7740..c91852d 100644 --- a/HACKING +++ b/HACKING @@ -52,9 +52,11 @@ The second byte is always 0x01 as far as I can tell. At some point in the file the page layout is apparently abandoned though the very last 2K in the file again looks like a valid page. The purpose of this -non-paged region is so far unknown. Could be a corrupt db as well. My current thinking is that this area is unallocated pages based on the GAM (global allocation map stored on page 0x01). +non-paged region is so far unknown. Could be a corrupt db as well. My current +thinking is that this area is unallocated pages based on the GAM (global +allocation map stored on page 0x01). -Bytes after the first and second seemed to depend on the type of page, although bytes 4-7 seem to indicate a page type of some sort. 02 00 00 00 is found on all catalog pages. +Bytes after the first and second seemed to depend on the type of page, although bytes 4-7 are pages pointers that refer to the parent (data pages) or a continuation page (table definition). Pages seem to have two parts, a header and a data portion. The header starts at the front of the page and builds up. The data is packed to the end of the @@ -145,7 +147,7 @@ The header of each Tdef page looks like this (8 bytes) : | 0x00 | 4 bytes | next_pg | Next tdef page pointer (0 if none) | +------+---------+-------------+------------------------------------------+ -Note: The tabledef is very long, so it can take many TDEF pages linked +Note: The tabledef can be very long, so it can take many TDEF pages linked with the next_pg pointer. +-------------------------------------------------------------------------+ diff --git a/INSTALL b/INSTALL index 38cf2af..2636a4e 100644 --- a/INSTALL +++ b/INSTALL @@ -26,3 +26,16 @@ prdata -- dump of the data given a table name. Once MDB Tools has been compiled, libmdb.[so|a] will be in the src/libmdb directory and the utility programs will be in the src/util directory. You can then run 'make install' as root to install (to /usr/local by default). + + +Installation Options +==================== + +configure can be passed any of the following flags to turn on other +capabilities. + +--enable-sql will cause the SQL engine to be built, you must have flex and + bison installed for this option. +--with-unixodbc specifies the location of the unixODBC driver manager and + causes the ODBC driver to be built. + diff --git a/Makefile b/Makefile index a60989e..7a9f95c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # Generated automatically from Makefile.in by configure. -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -62,6 +62,7 @@ host_triplet = i686-pc-linux-gnu AS = @AS@ CC = gcc DLLTOOL = @DLLTOOL@ +HAVE_GNOME = LD = /usr/bin/ld LEX = flex LIBTOOL = $(SHELL) $(top_builddir)/libtool @@ -149,7 +150,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ diff --git a/Makefile.in b/Makefile.in index 103412b..4019d56 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -62,6 +62,7 @@ host_triplet = @host@ AS = @AS@ CC = @CC@ DLLTOOL = @DLLTOOL@ +HAVE_GNOME = @HAVE_GNOME@ LD = @LD@ LEX = @LEX@ LIBTOOL = @LIBTOOL@ @@ -149,7 +150,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ diff --git a/TODO b/TODO index f331fb2..243f3ec 100644 --- a/TODO +++ b/TODO @@ -4,7 +4,7 @@ Things to Do file format: . how does global allocation map work? -. export VB script +. export VBA script . re-examine KKD records for form design (OLE streams?) . write support diff --git a/aclocal.m4 b/aclocal.m4 index accb9b7..d3adfc5 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -425,7 +425,7 @@ ifelse([AC_DISABLE_FAST_INSTALL])dnl dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -453,7 +453,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -494,7 +494,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -511,7 +511,7 @@ AC_SUBST($1)]) dnl AM_PROG_LEX dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT -AC_DEFUN(AM_PROG_LEX, +AC_DEFUN([AM_PROG_LEX], [missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1) AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex") AC_PROG_LEX @@ -519,7 +519,7 @@ AC_DECL_YYTEXT]) # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then diff --git a/config.guess b/config.guess index 6e39d78..ba66165 100755 --- a/config.guess +++ b/config.guess @@ -1,7 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. -# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. + +timestamp='2001-04-20' + # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or @@ -22,18 +25,92 @@ # the same distribution terms that you use for the rest of that program. # Written by Per Bothner . -# The master version of this file is at the FSF in /home/gd/gnu/lib. +# Please send patches to . # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + + +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c + for c in cc gcc c89 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break + fi + done + rm -f $dummy.c $dummy.o $dummy.rel + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 8/24/94.) @@ -43,14 +120,57 @@ fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # Netbsd (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # Determine the machine/vendor (is the vendor relevant). + case "${UNAME_MACHINE}" in + amiga) machine=m68k-unknown ;; + arm32) machine=arm-unknown ;; + atari*) machine=m68k-atari ;; + sun3*) machine=m68k-sun ;; + mac68k) machine=m68k-apple ;; + macppc) machine=powerpc-apple ;; + hp3[0-9][05]) machine=m68k-hp ;; + ibmrt|romp-ibm) machine=romp-ibm ;; + *) machine=${UNAME_MACHINE}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE}" in + i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` @@ -59,59 +179,75 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - cat <dummy.s + cat <$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text .globl main + .align 4 .ent main main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit .end main EOF - ${CC-cc} dummy.s -o dummy 2>/dev/null + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then - ./dummy - case "$?" in - 7) + case `./$dummy` in + 0-0) UNAME_MACHINE="alpha" ;; - 15) + 1-0) UNAME_MACHINE="alphaev5" ;; - 14) + 1-1) UNAME_MACHINE="alphaev56" ;; - 10) + 1-101) UNAME_MACHINE="alphapca56" ;; - 16) + 2-303) UNAME_MACHINE="alphaev6" ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; esac fi - rm -f dummy.s dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]` + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) - echo m68k-cbm-sysv4 + echo m68k-unknown-sysv4 exit 0;; - amiga:NetBSD:*:*) - echo m68k-cbm-netbsd${UNAME_RELEASE} - exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; arc64:OpenBSD:*:*) echo mips64el-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -130,16 +266,16 @@ EOF wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; - arm32:NetBSD:*:*) - echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - SR2?01:HI-UX/MPP:*:*) + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; - Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 @@ -147,9 +283,12 @@ EOF echo pyramid-pyramid-bsd fi exit 0 ;; - NILE:*:*:dcosx) + NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; @@ -189,21 +328,38 @@ EOF aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; - atari*:NetBSD:*:*) - echo m68k-atari-netbsd${UNAME_RELEASE} - exit 0 ;; atari*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - sun3*:NetBSD:*:*) - echo m68k-sun-netbsd${UNAME_RELEASE} + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; sun3*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - mac68k:NetBSD:*:*) - echo m68k-apple-netbsd${UNAME_RELEASE} - exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -225,15 +381,17 @@ EOF VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; - 2020:CLIX:*:*) + 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; - *:Darwin:*:* | :"Mac OS":*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} - exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) - sed 's/^ //' << EOF >dummy.c - int main (argc, argv) int argc; char **argv; { + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); @@ -248,12 +406,15 @@ EOF exit (-1); } EOF - ${CC-cc} dummy.c -o dummy \ - && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; @@ -269,15 +430,18 @@ EOF AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ - -o ${TARGET_BINARY_INTERFACE}x = x ] ; then + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then echo m88k-dg-dgux${UNAME_RELEASE} - else + else echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} fi - else echo i586-dg-dgux${UNAME_RELEASE} - fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 @@ -298,12 +462,20 @@ EOF ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) + i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >dummy.c + sed 's/^ //' << EOF >$dummy.c #include main() @@ -314,8 +486,8 @@ EOF exit(0); } EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 @@ -323,8 +495,9 @@ EOF echo rs6000-ibm-aix3.2 fi exit 0 ;; - *:AIX:*:4) - if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc @@ -332,7 +505,7 @@ EOF if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else - IBM_REV=4.${UNAME_RELEASE} + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; @@ -342,7 +515,7 @@ EOF ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) @@ -357,18 +530,75 @@ EOF hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; - 9000/[3478]??:HP-UX:*:*) + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;; - 9000/8?? ) HP_ARCH=hppa1.0 ;; + 9000/[678][0-9][0-9]) + case "${HPUX_REV}" in + 11.[0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + esac ;; + esac + fi ;; + esac + if [ "${HP_ARCH}" = "" ]; then + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >dummy.c + sed 's/^ //' << EOF >$dummy.c #include int main () @@ -393,8 +623,8 @@ EOF exit (0); } EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) @@ -403,13 +633,16 @@ EOF 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; + *9??*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; - i?86:OSF1:*:*) + i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else @@ -419,6 +652,9 @@ EOF parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; + hppa*:OpenBSD:*:*) + echo hppa-unknown-openbsd + exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; @@ -449,45 +685,64 @@ EOF -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ exit 0 ;; CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; - F300:UNIX_System_V:*:*) - FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; - F301:UNIX_System_V:*:*) - echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` - exit 0 ;; - hp3[0-9][05]:NetBSD:*:*) - echo m68k-hp-netbsd${UNAME_RELEASE} - exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - i?86:BSD/386:*:* | *:BSD/OS:*:*) + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; - *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; i*:CYGWIN*:*) - echo i386-pc-cygwin32 + echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) - echo i386-pc-mingw32 + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin32 + echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` @@ -495,78 +750,26 @@ EOF *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; - *:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. - ld_help_string=`ld --help 2>&1` - ld_supported_emulations=`echo $ld_help_string \ - | sed -ne '/supported emulations:/!d - s/[ ][ ]*/ /g - s/.*supported emulations: *// - s/ .*// - p'` - case "$ld_supported_emulations" in - i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;; - i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;; - sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;; - esac - - if test "${UNAME_MACHINE}" = "alpha" ; then - sed 's/^ //' <dummy.s - .globl main - .ent main - main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 - .end main -EOF - LIBC="" - ${CC-cc} dummy.s -o dummy 2>/dev/null - if test "$?" = 0 ; then - ./dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - - objdump --private-headers dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f dummy.s dummy - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 - elif test "${UNAME_MACHINE}" = "mips" ; then - cat >dummy.c <$dummy.c < /* for printf() prototype */ +int main (int argc, char *argv[]) { +#else +int main (argc, argv) int argc; char *argv[]; { +#endif #ifdef __MIPSEB__ printf ("%s-unknown-linux-gnu\n", argv[1]); #endif @@ -576,32 +779,152 @@ main(argc, argv) return 0; } EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - else - # Either a pre-BFD a.out linker (linux-gnuoldld) - # or one that does not give us useful --help. - # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. - # If ld does not provide *any* "supported emulations:" - # that means it is gnuoldld. - echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" - test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 - - case "${UNAME_MACHINE}" in - i?86) - VENDOR=pc; - ;; - *) - VENDOR=unknown; - ;; - esac - # Determine whether the default compiler is a.out or elf - cat >dummy.c </dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + ;; + ppc:Linux:*:*) + # Determine Lib Version + cat >$dummy.c < +#if defined(__GLIBC__) +extern char __libc_version[]; +extern char __libc_release[]; +#endif main(argc, argv) int argc; char *argv[]; { +#if defined(__GLIBC__) + printf("%s %s\n", __libc_version, __libc_release); +#else + printf("unknown\n"); +#endif + return 0; +} +EOF + LIBC="" + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null + if test "$?" = 0 ; then + ./$dummy | grep 1\.99 > /dev/null + if test "$?" = 0 ; then LIBC="libc1" ; fi + fi + rm -f $dummy.c $dummy + echo powerpc-unknown-linux-gnu${LIBC} + exit 0 ;; + alpha:Linux:*:*) + cat <$dummy.s + .data + \$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + .text + .globl main + .align 4 + .ent main + main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + LIBC="" + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) UNAME_MACHINE="alpha" ;; + 1-0) UNAME_MACHINE="alphaev5" ;; + 1-1) UNAME_MACHINE="alphaev56" ;; + 1-101) UNAME_MACHINE="alphapca56" ;; + 2-303) UNAME_MACHINE="alphaev6" ;; + 2-307) UNAME_MACHINE="alphaev67" ;; + esac + objdump --private-headers $dummy | \ + grep ld.so.1 > /dev/null + if test "$?" = 0 ; then + LIBC="libc1" + fi + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_supported_emulations=`cd /; ld --help 2>&1 \ + | sed -ne '/supported emulations:/!d + s/[ ][ ]*/ /g + s/.*supported emulations: *// + s/ .*// + p'` + case "$ld_supported_emulations" in + i*86linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 + ;; + elf_i*86) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + i*86coff) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 + ;; + esac + # Either a pre-BFD a.out linker (linux-gnuoldld) + # or one that does not give us useful --help. + # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. + # If ld does not provide *any* "supported emulations:" + # that means it is gnuoldld. + test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 + case "${UNAME_MACHINE}" in + i*86) + VENDOR=pc; + ;; + *) + VENDOR=unknown; + ;; + esac + # Determine whether the default compiler is a.out or elf + cat >$dummy.c < +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 @@ -618,15 +941,16 @@ main(argc, argv) return 0; } EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - fi ;; + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions # are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) + i*86:DYNIX/ptx:4*:*) echo i386-sequent-sysv4 exit 0 ;; - i?86:UNIX_SV:4.2MP:2.*) + i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, @@ -634,14 +958,24 @@ EOF # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; - i?86:*:3.2:*) + i*86:*:5:7*) + # Fixed at (any) Pentium or better + UNAME_MACHINE=i586 + if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then + echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} + fi + exit 0 ;; + i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; pc:*:*:*) + # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp @@ -679,7 +1021,7 @@ EOF exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` @@ -690,24 +1032,30 @@ EOF 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; - i?86:LynxOS:2.*:*) + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; - rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) + rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; @@ -735,22 +1083,101 @@ EOF mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; - news*:NEWS-OS:*:6*) + news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; - R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*) + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_MACHINE=pc + fi + echo `uname -p`-${UNAME_MACHINE}-nto-qnx + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[KW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 -cat >dummy.c <$dummy.c < # include @@ -788,7 +1215,10 @@ main () #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif @@ -833,11 +1263,24 @@ main () #endif #if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif #endif #if defined (alliant) && defined (i860) @@ -848,8 +1291,8 @@ main () } EOF -${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 -rm -f dummy.c dummy +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy # Apollos put the system type in the environment. @@ -881,6 +1324,48 @@ then esac fi -#echo '(Unable to guess system type)' 1>&2 +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.sub b/config.sub index 94a92b6..a06a480 100755 --- a/config.sub +++ b/config.sub @@ -1,6 +1,10 @@ #! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. + +timestamp='2001-04-20' + # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. @@ -25,6 +29,8 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. +# Please send patches to . +# # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. @@ -45,30 +51,73 @@ # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi +me=`echo "$0" | sed -e 's,.*/,,'` -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - linux-gnu*) + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -94,15 +143,25 @@ case $os in -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple) + -apple | -axis) os= basic_machine=$1 ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; -hiux*) os=-hiuxwe2 ;; -sco5) - os=sco3.2v5 + os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) @@ -121,6 +180,9 @@ case $os in os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -143,26 +205,50 @@ case $os in -psos*) os=-psos ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. - tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 \ - | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ - | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ - | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ - | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ - | mipstx39 | mipstx39el \ - | sparc | sparclet | sparclite | sparc64 | v850) + tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \ + | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \ + | pyramid | mn10200 | mn10300 | tron | a29k \ + | 580 | i960 | h8300 \ + | x86 | ppcbe | mipsbe | mipsle | shbe | shle \ + | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ + | hppa64 \ + | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ + | alphaev6[78] \ + | we32k | ns16k | clipper | i370 | sh | sh[34] \ + | powerpc | powerpcle \ + | 1750a | dsp16xx | pdp10 | pdp11 \ + | mips16 | mips64 | mipsel | mips64el \ + | mips64orion | mips64orionel | mipstx39 | mipstx39el \ + | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ + | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \ + | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \ + | v850 | c4x \ + | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \ + | pj | pjl | h8500) basic_machine=$basic_machine-unknown ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65) + ;; + # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. - i[3456]86) + i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. @@ -171,27 +257,52 @@ case $basic_machine in exit 1 ;; # Recognize the basic CPU types with company name. - vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ + # FIXME: clean up the formatting here. + vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ + | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \ + | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \ - | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \ - | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \ - | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \ - | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mipstx39-* | mipstx39el-* \ - | f301-*) + | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ + | xmp-* | ymp-* \ + | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \ + | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \ + | hppa2.0n-* | hppa64-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ + | alphaev6[78]-* \ + | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ + | clipper-* | orion-* \ + | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ + | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \ + | mips16-* | mips64-* | mipsel-* \ + | mips64el-* | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ + | mipstx39-* | mipstx39el-* | mcore-* \ + | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \ + | [cjt]90-* \ + | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ + | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \ + | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; alliant | fx80) basic_machine=fx80-alliant ;; @@ -207,20 +318,24 @@ case $basic_machine in os=-sysv ;; amiga | amiga-*) - basic_machine=m68k-cbm + basic_machine=m68k-unknown ;; amigaos | amigados) - basic_machine=m68k-cbm + basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) - basic_machine=m68k-cbm + basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; aux) basic_machine=m68k-apple os=-aux @@ -257,13 +372,16 @@ case $basic_machine in basic_machine=cray2-cray os=-unicos ;; - [ctj]90-cray) - basic_machine=c90-cray + [cjt]90) + basic_machine=${basic_machine}-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; da30 | da30-*) basic_machine=m68k-da30 ;; @@ -297,6 +415,10 @@ case $basic_machine in encore | umax | mmax) basic_machine=ns32k-encore ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; fx2800) basic_machine=i860-alliant ;; @@ -307,6 +429,10 @@ case $basic_machine in basic_machine=tron-gmicro os=-sysv ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 @@ -315,6 +441,14 @@ case $basic_machine in basic_machine=h8300-hitachi os=-hms ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; harris) basic_machine=m88k-harris os=-sysv3 @@ -330,13 +464,30 @@ case $basic_machine in basic_machine=m68k-hp os=-hpux ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; - hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) @@ -345,27 +496,42 @@ case $basic_machine in hppa-next) os=-nextstep3 ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; i370-ibm* | ibm*) basic_machine=i370-ibm - os=-mvs ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[3456]86v32) + i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; - i[3456]86v4*) + i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; - i[3456]86v) + i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; - i[3456]86sol2) + i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; iris | iris4d) basic_machine=mips-sgi case $os in @@ -391,9 +557,17 @@ case $basic_machine in basic_machine=ns32k-utek os=-sysv ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; miniframe) basic_machine=m68000-convergent ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; mipsel*-linux*) basic_machine=mipsel-unknown os=-linux-gnu @@ -408,10 +582,34 @@ case $basic_machine in mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos @@ -424,6 +622,10 @@ case $basic_machine in basic_machine=mips-sony os=-newsos ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; next | m*-next ) basic_machine=m68k-next case $os in @@ -449,9 +651,32 @@ case $basic_machine in basic_machine=i960-intel os=-nindy ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; np1) basic_machine=np1-gould ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 @@ -469,30 +694,28 @@ case $basic_machine in pc532 | pc532-*) basic_machine=ns32k-pc532 ;; - pentium | p5) - basic_machine=i586-intel + pentium | p5 | k5 | k6 | nexgen) + basic_machine=i586-pc ;; - pentiumpro | p6) - basic_machine=i686-intel + pentiumpro | p6 | 6x86 | athlon) + basic_machine=i686-pc ;; - pentium-* | p5-*) + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumpro-* | p6-*) + pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - k5) - # We don't have specific support for AMD's K5 yet, so just call it a Pentium - basic_machine=i586-amd - ;; - nexen) - # We don't have specific support for Nexgen yet, so just call it a Pentium - basic_machine=i586-nexgen + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; - power) basic_machine=rs6000-ibm + power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; @@ -507,12 +730,24 @@ case $basic_machine in ps2) basic_machine=i386-ibm ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; sequent) basic_machine=i386-sequent ;; @@ -520,6 +755,10 @@ case $basic_machine in basic_machine=sh-hitachi os=-hms ;; + sparclite-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; sps7) basic_machine=m68k-bull os=-sysv2 @@ -527,6 +766,13 @@ case $basic_machine in spur) basic_machine=spur-unknown ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; sun2) basic_machine=m68000-sun ;; @@ -567,10 +813,22 @@ case $basic_machine in sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; symmetry) basic_machine=i386-sequent os=-dynix ;; + t3e) + basic_machine=t3e-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; tx39) basic_machine=mipstx39-unknown ;; @@ -588,6 +846,10 @@ case $basic_machine in basic_machine=a29k-nyu os=-sym1 ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; vaxv) basic_machine=vax-dec os=-sysv @@ -611,6 +873,14 @@ case $basic_machine in basic_machine=a29k-wrs os=-vxworks ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; xmp) basic_machine=xmp-cray os=-unicos @@ -618,6 +888,10 @@ case $basic_machine in xps | xps100) basic_machine=xps100-honeywell ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; none) basic_machine=none-none os=-none @@ -625,6 +899,15 @@ case $basic_machine in # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; mips) if [ x$os = x-linux-gnu ]; then basic_machine=mips-unknown @@ -641,13 +924,20 @@ case $basic_machine in vax) basic_machine=vax-dec ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; - sparc) + sh3 | sh4) + basic_machine=sh-unknown + ;; + sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) @@ -659,6 +949,19 @@ case $basic_machine in orion105) basic_machine=clipper-highlevel ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 @@ -712,13 +1015,35 @@ case $os in | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -darwin*) + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*) # Remember, each alternative MUST END IN *, to match a version number. ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; @@ -728,6 +1053,12 @@ case $os in -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; -osfrose*) os=-osfrose ;; @@ -743,12 +1074,18 @@ case $os in -acis*) os=-aos ;; + -386bsd) + os=-bsd + ;; -ctix* | -uts*) os=-sysv ;; -ns2 ) os=-nextstep2 ;; + -nsk*) + os=-nsk + ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` @@ -774,9 +1111,18 @@ case $os in # This must come after -sysvr4. -sysv*) ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; -xenix) os=-xenix ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; -none) ;; *) @@ -802,9 +1148,15 @@ case $basic_machine in *-acorn) os=-riscix1.2 ;; + arm*-rebel) + os=-linux + ;; arm*-semi) os=-aout ;; + pdp10-*) + os=-tops20 + ;; pdp11-*) os=-none ;; @@ -823,15 +1175,36 @@ case $basic_machine in # default. # os=-sunos4 ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; + *-be) + os=-beos + ;; *-ibm) os=-aix ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; *-hp) os=-hpux ;; @@ -892,9 +1265,21 @@ case $basic_machine in *-masscomp) os=-rtu ;; - f301-fujitsu) + f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; *) os=-none ;; @@ -916,9 +1301,15 @@ case $basic_machine in -aix*) vendor=ibm ;; + -beos*) + vendor=be + ;; -hpux*) vendor=hp ;; + -mpeix*) + vendor=hp + ;; -hiux*) vendor=hitachi ;; @@ -934,7 +1325,7 @@ case $basic_machine in -genix*) vendor=ns ;; - -mvs*) + -mvs* | -opened*) vendor=ibm ;; -ptx*) @@ -946,9 +1337,26 @@ case $basic_machine in -aux*) vendor=apple ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure index 994c1fb..a47b393 100755 --- a/configure +++ b/configure @@ -2225,12 +2225,42 @@ else fi +echo $ac_n "checking for Gnome >= 1.2.0""... $ac_c" 1>&6 +echo "configure:2230: checking for Gnome >= 1.2.0" >&5 +if gnome-config --version > /dev/null 2>&1 +then + verstxt=`gnome-config --version` + vers=`echo "$verstxt" | sed -e "s/^gnome-libs //" | \ + awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'` + if test "$vers" -ge 1002000 + then + echo "$ac_t""found" 1>&6 + CFLAGS="$CFLAGS -DHAVE_GNOME" + havegnome=true + else + echo "$ac_t""not found" 1>&6 + havegnome=false + fi +else + echo "$ac_t""not found" 1>&6 + havegnome=false +fi + + +if test x$havegnome = xtrue; then + HAVE_GNOME_TRUE= + HAVE_GNOME_FALSE='#' +else + HAVE_GNOME_TRUE='#' + HAVE_GNOME_FALSE= +fi + OLDLDFLAGS=$LDFLAGS echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6 -echo "configure:2234: checking for initscr in -lncurses" >&5 +echo "configure:2264: checking for initscr in -lncurses" >&5 ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2238,7 +2268,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lncurses $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2274,7 +2304,7 @@ fi echo $ac_n "checking for add_history in -lreadline""... $ac_c" 1>&6 -echo "configure:2278: checking for add_history in -lreadline" >&5 +echo "configure:2308: checking for add_history in -lreadline" >&5 ac_lib_var=`echo readline'_'add_history | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2282,7 +2312,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lreadline $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2437,7 +2467,7 @@ done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" -trap 'rm -fr `echo "src/util/Makefile src/extras/Makefile Makefile include/Makefile src/Makefile src/libmdb/Makefile include/Makefile src/sql/Makefile src/odbc/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +trap 'rm -fr `echo "src/util/Makefile src/extras/Makefile Makefile include/Makefile src/Makefile src/libmdb/Makefile include/Makefile src/sql/Makefile src/odbc/Makefile src/gmdb/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then diff --git a/configure.in b/configure.in index 174d12b..f2f28b2 100644 --- a/configure.in +++ b/configure.in @@ -54,6 +54,28 @@ fi AM_CONDITIONAL(SQL, test x$sql = xtrue) AC_SUBST(SQL) +dnl gnome check modified from gnome-db +AC_MSG_CHECKING(for Gnome >= 1.2.0) +if gnome-config --version > /dev/null 2>&1 +then + verstxt=`gnome-config --version` + vers=`echo "$verstxt" | sed -e "s/^gnome-libs //" | \ + awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'` + if test "$vers" -ge 1002000 + then + AC_MSG_RESULT(found) + CFLAGS="$CFLAGS -DHAVE_GNOME" + havegnome=true + else + AC_MSG_RESULT(not found) + havegnome=false + fi +else + AC_MSG_RESULT(not found) + havegnome=false +fi +AM_CONDITIONAL(HAVE_GNOME, test x$havegnome = xtrue) +AC_SUBST(HAVE_GNOME) dnl Checks for library functions. @@ -73,4 +95,4 @@ LDFLAGS=$OLDLDFLAGS AC_SUBST(READLINE_LIBS) -AC_OUTPUT(src/util/Makefile src/extras/Makefile Makefile include/Makefile src/Makefile src/libmdb/Makefile include/Makefile src/sql/Makefile src/odbc/Makefile) +AC_OUTPUT(src/util/Makefile src/extras/Makefile Makefile include/Makefile src/Makefile src/libmdb/Makefile include/Makefile src/sql/Makefile src/odbc/Makefile src/gmdb/Makefile) diff --git a/include/Makefile b/include/Makefile index d606fe7..1c90058 100644 --- a/include/Makefile +++ b/include/Makefile @@ -1,7 +1,7 @@ # Generated automatically from Makefile.in by configure. -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -62,6 +62,7 @@ host_triplet = i686-pc-linux-gnu AS = @AS@ CC = gcc DLLTOOL = @DLLTOOL@ +HAVE_GNOME = LD = /usr/bin/ld LEX = flex LIBTOOL = $(SHELL) $(top_builddir)/libtool diff --git a/include/Makefile.in b/include/Makefile.in index 1b17027..ab67337 100644 --- a/include/Makefile.in +++ b/include/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -62,6 +62,7 @@ host_triplet = @host@ AS = @AS@ CC = @CC@ DLLTOOL = @DLLTOOL@ +HAVE_GNOME = @HAVE_GNOME@ LD = @LD@ LEX = @LEX@ LIBTOOL = @LIBTOOL@ diff --git a/include/mdbodbc.h b/include/mdbodbc.h index e09ef29..b6d3164 100644 --- a/include/mdbodbc.h +++ b/include/mdbodbc.h @@ -27,7 +27,7 @@ extern "C" { #endif static char rcsid_sql_h [ ] = - "$Id: mdbodbc.h,v 1.1 2002/01/24 12:34:12 brianb Exp $"; + "$Id: mdbodbc.h,v 1.2 2002/04/09 01:18:17 brianb Exp $"; static void *no_unused_sql_h_warn[]={rcsid_sql_h, no_unused_sql_h_warn}; struct _henv { @@ -43,12 +43,14 @@ struct _hstmt { */ char query[4096]; struct _sql_bind_info *bind_head; + int rows_affected; }; struct _sql_bind_info { int column_number; int column_bindtype; int column_bindlen; + int *column_lenbind; char *varaddr; struct _sql_bind_info *next; }; diff --git a/include/mdbtools.h b/include/mdbtools.h index 5a2f181..fd0497b 100644 --- a/include/mdbtools.h +++ b/include/mdbtools.h @@ -178,7 +178,8 @@ typedef struct { char name[MDB_MAX_OBJ_NAME+1]; int col_type; int col_size; - void *bind_ptr; + void *bind_ptr; + int *len_ptr; GHashTable *properties; int num_sargs; GPtrArray *sargs; diff --git a/ltmain.sh b/ltmain.sh index ae10cad..2393e14 100644 --- a/ltmain.sh +++ b/ltmain.sh @@ -1,7 +1,8 @@ # ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify @@ -54,8 +55,8 @@ modename="$progname" # Constants. PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.3.3 -TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)" +VERSION=1.4 +TIMESTAMP=" (1.920 2001/04/24 23:26:18)" default_mode= help="Try \`$progname --help' for more information." @@ -83,12 +84,6 @@ if test "${LANG+set}" = set; then save_LANG="$LANG"; LANG=C; export LANG fi -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 @@ -113,16 +108,16 @@ do arg="$1" shift - case "$arg" in + case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" + execute_dlfiles="$execute_dlfiles $arg" ;; *) eval "$prev=\$arg" @@ -135,7 +130,7 @@ do fi # Have we seen a non-optional argument yet? - case "$arg" in + case $arg in --help) show_help=yes ;; @@ -146,7 +141,7 @@ do ;; --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; @@ -211,12 +206,12 @@ if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then - case "$nonopt" in + case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do - case "$arg" in + case $arg in -c) mode=compile break @@ -261,12 +256,13 @@ if test -z "$show_help"; then help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. - case "$mode" in + case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= + prev= lastarg= srcfile="$nonopt" suppress_output= @@ -274,8 +270,34 @@ if test -z "$show_help"; then user_target=no for arg do + case $prev in + "") ;; + xcompiler) + # Aesthetically quote the previous argument. + prev= + lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + + case $arg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + # Accept any command-line options. - case "$arg" in + case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 @@ -288,9 +310,53 @@ if test -z "$show_help"; then build_old_libs=yes continue ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; esac - case "$user_target" in + case $user_target in next) # The next one is the -o target name user_target=yes @@ -316,10 +382,10 @@ if test -z "$show_help"; then lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $lastarg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac @@ -332,7 +398,7 @@ if test -z "$show_help"; then fi done - case "$user_target" in + case $user_target in set) ;; no) @@ -348,7 +414,7 @@ if test -z "$show_help"; then # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' - case "$libobj" in + case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; @@ -363,7 +429,7 @@ if test -z "$show_help"; then libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case "$libobj" in + case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 @@ -387,10 +453,21 @@ if test -z "$show_help"; then $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 @@ -402,7 +479,7 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do + until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done @@ -434,8 +511,13 @@ compiler." # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $pic_flag -DPIC $srcfile" + if test "$pic_mode" != no; then + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + else + # Don't build PIC code + command="$base_compile $srcfile" + fi if test "$build_old_libs" = yes; then lo_libobj="$libobj" dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` @@ -506,7 +588,8 @@ compiler." fi # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then + if (test -z "$pic_flag" || test "$pic_mode" != default) && + test "$build_old_libs" = yes; then # Rename the .lo from within objdir to obj if test -f $obj; then $show $rm $obj @@ -521,9 +604,17 @@ compiler." exit $error fi + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` + libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` # Now arrange that obj and lo_libobj become the same file - $show "$LN_S $obj $lo_libobj" - if $run $LN_S $obj $lo_libobj; then + $show "(cd $xdir && $LN_S $baseobj $libobj)" + if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then exit 0 else error=$? @@ -538,7 +629,13 @@ compiler." # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $srcfile" + else + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + fi if test "$compiler_c_o" = yes; then command="$command -o $obj" output_obj="$obj" @@ -604,19 +701,17 @@ compiler." # Unlock the critical section if it was locked if test "$need_locks" != no; then - $rm "$lockfile" + $run $rm "$lockfile" fi exit 0 ;; # libtool link mode - link) + link | relink) modename="$modename: link" - C_compiler="$CC" # save it, to compile generated C sources - CC="$nonopt" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra @@ -629,181 +724,14 @@ compiler." # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac - case "$prev" in + case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -899,7 +828,7 @@ compiler." finalize_command="$finalize_command @SYMFILE@" preload=yes fi - case "$arg" in + case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then @@ -928,6 +857,7 @@ compiler." dlprefiles="$dlprefiles $arg" fi prev= + continue ;; esac ;; @@ -952,7 +882,7 @@ compiler." ;; rpath | xrpath) # We need an absolute path. - case "$arg" in + case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -973,17 +903,32 @@ compiler." prev= continue ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac - fi + fi # test -n $prev prevarg="$arg" - case "$arg" in + case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" @@ -1020,7 +965,7 @@ compiler." -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: not more than one -exported-symbols argument allowed" + $echo "$modename: more than one -exported-symbols argument is not allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then @@ -1031,58 +976,65 @@ compiler." continue ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 fi dir="$absdir" ;; esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; - esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac + continue ;; -l*) - if test "$arg" = "-lc"; then - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # These systems don't actually have c library (as such) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) continue ;; - esac - elif test "$arg" = "-lm"; then - case "$host" in - *-*-cygwin* | *-*-beos*) - # These systems don't actually have math library (as such) - continue + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue ;; esac fi deplibs="$deplibs $arg" + continue ;; -module) @@ -1090,6 +1042,25 @@ compiler." continue ;; + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + -no-undefined) allow_undefined=no continue @@ -1115,7 +1086,7 @@ compiler." -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -1130,11 +1101,11 @@ compiler." ;; -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. continue ;; @@ -1148,28 +1119,71 @@ compiler." continue ;; + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. + *.lo | *.$objext) + # A library or standard object. if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" prev= continue else @@ -1182,300 +1196,35 @@ compiler." # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` prev= + else + case $arg in + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; + esac fi - libobjs="$libobjs $arg" + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue ;; *.la) # A libtool-controlled library. - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - fi - - if test -n "$dependency_libs"; then - # Extract -R and -L from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` - case " $lib_search_path " in - *" $temp_dir "*) ;; - *) lib_search_path="$lib_search_path $temp_dir";; - esac - ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" - continue - fi - - # This library was specified with -dlopen. if test "$prev" = dlfiles; then + # This library was specified with -dlopen. dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi prev= - fi - - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # We need an absolute path. - case "$dir" in - [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" - ;; - esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - relink) - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - fi + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" - fi + deplibs="$deplibs $arg" fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" continue ;; @@ -1484,20 +1233,20 @@ compiler." # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; - esac + esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi - done + done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 @@ -1511,28 +1260,826 @@ compiler." finalize_command="$finalize_command $arg" fi - oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" - case "$output" in + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Determine the type of output + case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 + specialdeplibs= + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + libs="$libs $deplib" + done + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode" = prog; then + # Determine which files to process + case $pass in + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test "$linkmode" = oldlib && test "$linkmode" = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + continue + fi + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + # Search the libtool library + lib="$searchdir/lib${name}.la" + if test -f "$lib"; then + found=yes + break + fi + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + echo + echo "*** Warning: This library needs some functionality provided by $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + else + echo + echo "*** Warning: Linking the shared library $output against the" + echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test $found = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + # Check to see that this really is a libtool archive. + if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variable installed. + installed=yes + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then + # Add dl[pre]opened files of deplib + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" + fi + continue + fi + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test $linkalldeplibs = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + + if test "$linkmode,$pass" = "prog,link" || + { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + if test "$linkmode" = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`echo $soroot | sed -e 's/^.*\///'` + newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n $old_archive_from_expsyms_cmds + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + # Try to link the static library + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + echo "*** Warning: This library needs some functionality provided by $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** Therefore, libtool will create a static module, that should work " + echo "*** as long as the dlopening application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || test $build_old_libs = yes || + test $link_static = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="-L$absdir/$objdir" + else + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="-L$absdir" + fi + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done fi + if test "$pass" != dlopen; then + test "$pass" != scan && dependency_libs="$newdependency_libs" + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + *) + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= + fi + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -1560,11 +2107,12 @@ compiler." # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" + objs="$objs$old_deplibs" ;; - *.la) + lib) # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in + case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" @@ -1585,26 +2133,20 @@ compiler." ;; esac - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + echo + echo "*** Warning: Linking the shared library $output against the non-libtool" + echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi fi - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath @@ -1622,7 +2164,6 @@ compiler." build_libtool_libs=convenience build_old_libs=yes fi - dependency_libs="$deplibs" if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 @@ -1649,8 +2190,8 @@ compiler." age="$4" # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1658,8 +2199,8 @@ compiler." ;; esac - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1667,8 +2208,8 @@ compiler." ;; esac - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1686,12 +2227,31 @@ compiler." major= versuffix= verstring= - case "$version_type" in + case $version_type in none) ;; + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + irix) major=`expr $current - $age + 1` - versuffix="$major.$revision" verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. @@ -1701,6 +2261,10 @@ compiler." loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" ;; linux) @@ -1730,21 +2294,11 @@ compiler." versuffix=".$current.$revision" ;; - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. major=`expr $current - $age` - versuffix="-$major-$age-$revision" + versuffix="-$major" ;; *) @@ -1771,7 +2325,7 @@ compiler." versuffix= verstring="" fi - + # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then @@ -1783,30 +2337,12 @@ compiler." # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac fi - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then + if test "$mode" != relink; then + # Remove our outputs. $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi fi # Now set the variables for building old libraries. @@ -1817,7 +2353,70 @@ compiler." oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` + deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname @@ -1832,7 +2431,7 @@ compiler." major="" newdeplibs= droppeddeps=no - case "$deplibs_check_method" in + case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check @@ -1851,13 +2450,13 @@ compiler." int main() { return 0; } EOF $rm conftest - $C_compiler -o conftest conftest.c $deplibs + $CC -o conftest conftest.c $deplibs if test $? -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` deplib_matches=`eval \\$echo \"$library_names_spec\"` set dummy $deplib_matches @@ -1882,9 +2481,9 @@ EOF for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then $rm conftest - $C_compiler -o conftest conftest.c $i + $CC -o conftest conftest.c $i # Did it work? if test $? -eq 0 ; then ldd_output=`ldd conftest` @@ -1918,19 +2517,19 @@ EOF ;; file_magic*) set dummy $deplibs_check_method - file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path; do + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then - continue + continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. @@ -1940,7 +2539,7 @@ EOF potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in + case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac @@ -1968,6 +2567,40 @@ EOF fi done # Gone through all deplibs. ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + if eval echo \"$potent_lib\" 2>/dev/null \ + | sed 10q \ + | egrep "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ @@ -1990,6 +2623,13 @@ EOF libname=$libname_save name=$name_save + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + if test "$droppeddeps" = yes; then if test "$module" = yes; then echo @@ -2015,6 +2655,21 @@ EOF echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." + + if test $allow_undefined = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi fi fi # Done checking deplibs! @@ -2025,9 +2680,64 @@ EOF library_names= old_library= dlname= - + # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names @@ -2039,6 +2749,7 @@ EOF else soname="$realname" fi + test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" for link @@ -2047,12 +2758,19 @@ EOF done # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) incase we are running --disable-static + # (e.g. aix) in case we are running --disable-static for obj in $libobjs; do - oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"` - if test ! -f $oldobj; then - $show "${LN_S} $obj $oldobj" - $run ${LN_S} $obj $oldobj || exit $? + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + if test ! -f $xdir/$oldobj; then + $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" + $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? fi done @@ -2103,7 +2821,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2128,7 +2846,12 @@ EOF if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - linkopts="$linkopts $flag" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. @@ -2145,6 +2868,12 @@ EOF done IFS="$save_ifs" + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then @@ -2161,12 +2890,7 @@ EOF fi ;; - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - + obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi @@ -2191,9 +2915,9 @@ EOF $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi - case "$output" in + case $output in *.lo) - if test -n "$objs"; then + if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi @@ -2217,7 +2941,7 @@ EOF gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec - wl= + wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then @@ -2236,7 +2960,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2260,7 +2984,7 @@ EOF fi # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" @@ -2295,7 +3019,7 @@ EOF exit 0 fi - if test -n "$pic_flag"; then + if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" @@ -2311,8 +3035,16 @@ EOF # Just create a symlink. $show $rm $libobj $run $rm $libobj - $show "$LN_S $obj $libobj" - $run $LN_S $obj $libobj || exit $? + xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$libobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + $show "(cd $xdir && $LN_S $oldobj $baseobj)" + $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then @@ -2323,8 +3055,10 @@ EOF exit 0 ;; - # Anything else should be a program. - *) + prog) + case $host in + *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi @@ -2334,20 +3068,27 @@ EOF fi if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi + fi fi - + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; @@ -2365,7 +3106,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2383,6 +3124,14 @@ EOF *) perm_rpath="$perm_rpath $libdir" ;; esac fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && @@ -2401,7 +3150,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2428,23 +3177,6 @@ EOF fi finalize_rpath="$rpath" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -2461,7 +3193,7 @@ EOF fi if test -n "$dlsyms"; then - case "$dlsyms" in + case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. @@ -2493,7 +3225,7 @@ extern \"C\" { test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" @@ -2503,7 +3235,7 @@ extern \"C\" { $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi - + if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' @@ -2592,22 +3324,27 @@ static const void *lt_preloaded_setup() { fi pic_flag_for_symtable= - case "$host" in + case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*) + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DPIC";; esac esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" @@ -2632,7 +3369,7 @@ static const void *lt_preloaded_setup() { finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + if test $need_relink = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" @@ -2641,7 +3378,7 @@ static const void *lt_preloaded_setup() { $show "$link_command" $run eval "$link_command" status=$? - + # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" @@ -2655,7 +3392,7 @@ static const void *lt_preloaded_setup() { # We should set the shlibpath_var rpath= for dir in $temp_rpath; do - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" @@ -2697,11 +3434,24 @@ static const void *lt_preloaded_setup() { fi fi + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else @@ -2721,7 +3471,7 @@ static const void *lt_preloaded_setup() { # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - + # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname @@ -2733,12 +3483,24 @@ static const void *lt_preloaded_setup() { # Quote the relink command for shipping. if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="cd `pwd`; $relink_command" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in + case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac @@ -2754,6 +3516,11 @@ static const void *lt_preloaded_setup() { case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) exeext=.exe ;; + *) exeext= ;; + esac $rm $output trap "$rm $output; exit 1" 1 2 15 @@ -2776,14 +3543,14 @@ sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' + notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then @@ -2816,7 +3583,7 @@ else # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi @@ -2832,9 +3599,9 @@ else if test "$fast_install" = yes; then echo >> $output "\ - program=lt-'$outputname' + program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" - + if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then @@ -2851,7 +3618,7 @@ else # relink executable if necessary if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : + if (eval \$relink_command); then : else $rm \"\$progdir/\$file\" exit 1 @@ -2865,7 +3632,7 @@ else fi" else echo >> $output "\ - program='$outputname$exeext' + program='$outputname' progdir=\"\$thisdir/$objdir\" " fi @@ -2901,13 +3668,21 @@ else # Run the actual program with our arguments. " case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work + # win32 systems need to use the prog path for dll + # lookup to work + *-*-cygwin* | *-*-pw32*) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; + *) $echo >> $output "\ # Export the path to the program. @@ -2949,7 +3724,7 @@ fi\ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi @@ -2965,11 +3740,11 @@ fi\ exit $status fi generated="$generated $gentop" - + # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2995,14 +3770,21 @@ fi\ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else - # Ensure that we have .o objects in place incase we decided + # Ensure that we have .o objects in place in case we decided # not to build a shared library, and have fallen back to building # static libs even though --disable-static was passed! for oldobj in $oldobjs; do if test ! -f $oldobj; then - obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"` - $show "${LN_S} $obj $oldobj" - $run ${LN_S} $obj $oldobj || exit $? + xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$oldobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` + obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + $show "(cd $xdir && ${LN_S} $obj $baseobj)" + $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? fi done @@ -3023,19 +3805,26 @@ fi\ fi # Now create the libtool archive. - case "$output" in + case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then @@ -3045,8 +3834,52 @@ fi\ break fi output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" fi $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP @@ -3055,7 +3888,7 @@ fi\ # It is necessary for linking the library. # The name that we can dlopen(3). -dlname='$dlname' +dlname='$tdlname' # Names of this library. library_names='$library_names' @@ -3074,16 +3907,23 @@ revision=$revision # Is this an already installed library? installed=$installed +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + # Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" +libdir='$install_libdir'" + if test "$installed" = no && test $need_relink = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 @@ -3095,10 +3935,12 @@ libdir='$install_libdir'\ # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3114,7 +3956,7 @@ libdir='$install_libdir'\ # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3137,7 +3979,7 @@ libdir='$install_libdir'\ continue fi - case "$arg" in + case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; @@ -3162,7 +4004,7 @@ libdir='$install_libdir'\ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3213,11 +4055,11 @@ libdir='$install_libdir'\ exit 1 fi fi - case "$destdir" in + case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do - case "$file" in + case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 @@ -3239,8 +4081,8 @@ libdir='$install_libdir'\ for file in $files; do # Do each installation. - case "$file" in - *.a | *.lib) + case $file in + *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; @@ -3256,8 +4098,9 @@ libdir='$install_libdir'\ library_names= old_library= + relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3276,10 +4119,20 @@ libdir='$install_libdir'\ esac fi - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" + if test -n "$relink_command"; then + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + continue + fi + fi + # See the names of the shared library. set dummy $library_names if test -n "$2"; then @@ -3287,9 +4140,16 @@ libdir='$install_libdir'\ shift shift + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi if test $# -gt 0; then # Delete the old symlinks, and create new ones. @@ -3336,11 +4196,11 @@ libdir='$install_libdir'\ fi # Deduce the name of the destination old-style object file. - case "$destfile" in + case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; - *.o | *.obj) + *.$objext) staticdest="$destfile" destfile= ;; @@ -3379,39 +4239,46 @@ libdir='$install_libdir'\ # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= + notinst_deplibs= relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then + if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes - for lib in $link_against_libtool_libs; do + for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. - case "$lib" in + case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then @@ -3423,6 +4290,7 @@ libdir='$install_libdir'\ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi + file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` @@ -3444,6 +4312,23 @@ libdir='$install_libdir'\ fi fi + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + /usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`echo $destfile | sed -e 's,.exe$,,'` + ;; + esac + ;; + esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" @@ -3460,6 +4345,11 @@ libdir='$install_libdir'\ $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' @@ -3520,7 +4410,7 @@ libdir='$install_libdir'\ fi # Exit here if they wanted silent mode. - test "$show" = : && exit 0 + test "$show" = ":" && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" @@ -3530,7 +4420,7 @@ libdir='$install_libdir'\ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" @@ -3580,7 +4470,7 @@ libdir='$install_libdir'\ fi dir= - case "$file" in + case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : @@ -3595,7 +4485,7 @@ libdir='$install_libdir'\ library_names= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3650,13 +4540,13 @@ libdir='$install_libdir'\ args= for file do - case "$file" in + case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3672,8 +4562,10 @@ libdir='$install_libdir'\ done if test -z "$run"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi # Restore saved enviroment variables if test "${save_LC_ALL+set}" = set; then @@ -3690,22 +4582,31 @@ libdir='$install_libdir'\ exit 1 else # Display what would be done. - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi $echo "$cmd$args" exit 0 fi ;; - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" rm="$nonopt" files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" for arg do - case "$arg" in + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac @@ -3717,14 +4618,42 @@ libdir='$install_libdir'\ exit 1 fi + rmdirs= + for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. + if test "X$dir" = "X$file"; then + dir=. + objdir="$objdir" + else + objdir="$dir/$objdir" + fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test $mode = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test $mode = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi rmfiles="$file" - case "$name" in + case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then @@ -3732,38 +4661,43 @@ libdir='$install_libdir'\ # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $dir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + if test $mode = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi + fi - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. fi - - # FIXME: should reinstall the best remaining shared library. fi ;; @@ -3772,17 +4706,35 @@ libdir='$install_libdir'\ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` rmfiles="$rmfiles $dir/$oldobj" fi - $show "$rm $rmfiles" - $run $rm $rmfiles ;; *) - $show "$rm $rmfiles" - $run $rm $rmfiles + # Do a test to see if this is a libtool program. + if test $mode = clean && + (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$file + + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + fi ;; esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 done - exit 0 + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status ;; "") @@ -3798,7 +4750,7 @@ libdir='$install_libdir'\ fi # test -z "$show_help" # We need to display help for each of the modes. -case "$mode" in +case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... @@ -3817,6 +4769,7 @@ Provide generalized library-building support services. MODE must be one of the following: + clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries @@ -3829,6 +4782,20 @@ a more detailed description of MODE." exit 0 ;; +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE @@ -3838,6 +4805,8 @@ Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file @@ -3917,6 +4886,8 @@ The following components of LINK-COMMAND are treated specially: -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information