mirror of
https://github.com/mdbtools/mdbtools.git
synced 2025-09-18 09:50:07 +08:00
restructing...automake now used sql stuff working
This commit is contained in:
brianb
226
HACKING
Normal file
226
HACKING
Normal file
@@ -0,0 +1,226 @@
|
||||
Ok, this is a brain-dump of everything I've learned about MDB files. I'm am
|
||||
using Access 97, so everything I say applies to that and maybe or maybe not
|
||||
other versions.
|
||||
|
||||
Right, so here goes:
|
||||
|
||||
Note: It appears that much of the data in the pages is unitialized garbage.
|
||||
This makes the task of figuring out the format a bit more challenging.
|
||||
|
||||
Pages
|
||||
-----
|
||||
|
||||
MDB files are a set of pages. These pages are 2K (2048 bytes) in size, so in a
|
||||
hex dump of the data they start on adreeses like xxx000 and xxx800.
|
||||
|
||||
The first byte of each page seems to be a type indentifier for instance the
|
||||
first page in the mdb file is 0x00, which no other pages seems to share. Other
|
||||
pages have values of 0x01, 0x02, 0x03, 0x04 though the exact meaning of these
|
||||
is currently a mystery. (0x04 seems to be data I guess).
|
||||
|
||||
The second byte is always 0x01 as far as I can tell.
|
||||
|
||||
At some point in the file the page layout is apparently abandoned though the
|
||||
very last 2K in the file again looks like a valid page. The purpose of this
|
||||
non-paged region is so far unknown .
|
||||
|
||||
Bytes after the first and second seemed to depend on the type of page, although bytes 4-7 seem to indicate a page type of some sort. 02 00 00 00 is found on all catalog pages.
|
||||
|
||||
Pages seem to have two parts, a header and a data portion. The header starts
|
||||
at the front of the page and builds up. The data is packed to the end of the
|
||||
page. This means the last byte of the data portion is the last byte of the
|
||||
page.
|
||||
|
||||
Byte Order
|
||||
----------
|
||||
|
||||
All offsets to data within the file are in little endian (intel) order
|
||||
|
||||
Catalogs
|
||||
--------
|
||||
|
||||
So far the first page of the catalog has always been seen at 0x9000 bytes into
|
||||
the file. It is unclear whether this is always where it occurs, or whether a
|
||||
pointer to this location exists elsewhere.
|
||||
|
||||
The header to the catalog page(s) start look something like this:
|
||||
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| 0x01 | 1 byte | Page type |
|
||||
| 0x01 | 1 byte | Unknown |
|
||||
| ???? | 2 bytes | A pointer of unknown use into the page |
|
||||
| 0x02 | 1 byte | Unknown |
|
||||
| 0x00 | 3 bytes | Possibly part of a 32 bit int including the 0x02 above |
|
||||
| ???? | 2 bytes | a 16bit int of the number of records on this page |
|
||||
+-------------------------------------------------------------------------+
|
||||
| Iterate for the number of records |
|
||||
+-------------------------------------------------------------------------+
|
||||
| ???? | 2 bytes | offset to the records location on this page |
|
||||
+-------------------------------------------------------------------------+
|
||||
|
||||
The rest of the data is packed to the end of the page, such that the last
|
||||
record ends on byte 2047 (0 based).
|
||||
|
||||
Some of the offsets are not within the bounds of the page. The reason for this
|
||||
is not presently understood and the current code discards them silently.
|
||||
Offsets that have 0x40 in the high order byte point to a location within the
|
||||
page where a pointer to another catalog page is stored. This does not seem to
|
||||
yeild a complete chain of catalog pages and is currently being ignored in favor
|
||||
of a brute force read of the entire database for catalog pages.
|
||||
|
||||
Little is understood of the meaning of the bytes that make up the records. They
|
||||
vary in size, but portion prior to the objects name seems to be fixed. All
|
||||
records start with a '0x11'. The next two bytes are a page number to the column definitions. (see Column Definition).
|
||||
|
||||
Byte offset 9 from the beginning of the record contains it's type. Here is a
|
||||
table of known types:
|
||||
|
||||
0x00 Form
|
||||
0x01 User Table
|
||||
0x02 Macro
|
||||
0x03 System Table
|
||||
0x04 Report
|
||||
0x05 Query
|
||||
0x06 Linked Table
|
||||
0x07 Module
|
||||
0x0b Unknown but used for two objects (AccessLayout and UserDefined)
|
||||
|
||||
Byte offset 31 from the begining of the record starts the object's name. I am
|
||||
not presently aware of any field defining the length of the name, so the present
|
||||
course of action has been to stop at the first non-printable character
|
||||
(generally a 0x03 or 0x02)
|
||||
|
||||
After the name there is sometimes have (not yet determined why only sometimes)
|
||||
a page pointer and offset to the KKD records (see below). There is also pointer to other catalog pages, but I'm not really sure how to parse those.
|
||||
|
||||
Table Definition
|
||||
-----------------
|
||||
|
||||
The second and third bytes of each catalog entry store a 16 bit page pointer to
|
||||
a table definition, including name, type, size, number of datarows, a pointer
|
||||
to the first data page, and possibly more. I haven't fully figured this out so what follows is rough.
|
||||
|
||||
The header to table definition pages start look something like this:
|
||||
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| 0x02 | 1 byte | Page type |
|
||||
| 0x01 | 1 byte | Unknown |
|
||||
| 'VC' | 2 bytes | ??? |
|
||||
| 0x00 | 4 bytes | Pointer to continuation page (if multipage table def) |
|
||||
| ???? | 4 bytes | appears to be a length of the data |
|
||||
| ???? | 4 bytes | number of rows of data in this table |
|
||||
| 0x00 | 4 bytes | ??? |
|
||||
| 0x4e | 1 byte | ??? |
|
||||
| ???? | 2 bytes | generally same as # of cols but not always |
|
||||
| ???? | 2 bytes | ??? |
|
||||
| ???? | 2 bytes | number of columns in table |
|
||||
| ???? | 4 bytes | number of indexes for this table |
|
||||
| ???? | 4 bytes | number of index entries for this table |
|
||||
| 0x00 | 1 byte | ??? |
|
||||
| ???? | 2 bytes | page number of first datapage for table |
|
||||
| ???? | 2 bytes | ??? |
|
||||
| ???? | 2 bytes | page number of first datapage for table |
|
||||
| 0x00 | 1 byte | ??? |
|
||||
+-------------------------------------------------------------------------+
|
||||
| Iterate for 2 x number of indexes |
|
||||
+-------------------------------------------------------------------------+
|
||||
| ???? | 4 bytes | number of rows in table |
|
||||
| ???? | 4 bytes | number of rows in the index |
|
||||
+-------------------------------------------------------------------------+
|
||||
|
||||
The next few bytes are somewhat of a mystery right now, but around 0x2B from
|
||||
the start of the page (though not always) begins a series of 18 byte records
|
||||
one for each column present. It's format is as follows:
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| ???? | 1 byte | Column Type (see table below) |
|
||||
| ???? | 2 bytes | Column Number, ascending sequential number, starts at 0|
|
||||
| ???? | 1 byte | unknown. 1 is sometimes seen in text types |
|
||||
| ???? | 1 byte | unknown |
|
||||
| ???? | 4 bytes | Column Number (again) |
|
||||
| ???? | 6 bytes | ??? (timestamp?) |
|
||||
| ???? | 1 bytes | bitmask of some sort. low order bit indicates variable |
|
||||
| | | length column |
|
||||
| ???? | 2 bytes | length of column |
|
||||
+-------------------------------------------------------------------------+
|
||||
|
||||
Column Type may be one of the following (not complete).
|
||||
|
||||
0x03 Integer (16 bit)
|
||||
0x04 Long Integer (32 bit)
|
||||
0x08 Short Date/Time
|
||||
0x0a Text
|
||||
0x0c Hyperlink
|
||||
|
||||
Following the 18 byte column records begins the column names, listed in order
|
||||
with a 1 byte size prefix preceding each name.
|
||||
|
||||
After this are a series of 39 byte fields for each index. At offset 34 is a 4 byte page number where the index lives.
|
||||
|
||||
Beyond this are a series of 20 byte fields for each 'index entry'. There may be more entrys than indexes and byte 20 represents its type (0x00 for normal index, 0x01 for Primary Key, and 0x02 otherwise).
|
||||
|
||||
It is currently unknown how indexes are mapped to columns or the format of the index pages.
|
||||
|
||||
Data Rows
|
||||
---------
|
||||
|
||||
The header of a data page looks like this:
|
||||
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| 0x01 | 1 byte | Page type |
|
||||
| 0x01 | 1 byte | Unknown |
|
||||
| ???? | 2 bytes | Unknown |
|
||||
| ???? | 2 bytes | Page pointer to table definition |
|
||||
| 0x00 | 2 bytes | Unknown |
|
||||
| ???? | 4 bytes | number of rows of data in this table |
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| Iterate for the number of records |
|
||||
+-------------------------------------------------------------------------+
|
||||
| ???? | 2 bytes | offset to the records location on this page |
|
||||
+-------------------------------------------------------------------------+
|
||||
|
||||
Each data row looks like this:
|
||||
|
||||
+------+---------+--------------------------------------------------------+
|
||||
| ???? | 1 byte | Number of columns stored in this row |
|
||||
| ???? | n bytes | Fixed length columns |
|
||||
| ???? | n bytes | Variable length columns |
|
||||
| ???? | 1 byte | length of data from beginning of record |
|
||||
| ???? | n bytes | offset from start of row for each variable length col |
|
||||
| ???? | 1 byte | number of variable length columns |
|
||||
| ???? | n bytes | Null indicator. size is 1 byte per 8 columns. |
|
||||
| | | 0 indicates a null value. |
|
||||
+------+---------+--------------------------------------------------------+
|
||||
|
||||
Note: it is possible for the offset to the beginning of a variable length
|
||||
column to require more than one byte (if the sum of the lengths of columns is
|
||||
greater than 255). I have no idea how this is represented in the data as I
|
||||
have not looked at tables large enough for this to occur yet.
|
||||
|
||||
KKD Records
|
||||
-----------
|
||||
|
||||
Design View table definitions appear to be stored in 'KKD' records (my name for
|
||||
them...they always start with 'KKD\0'). Again these reside on pages, packed to
|
||||
the end of the page.
|
||||
|
||||
They look a little like this: (this needs work...see the kkd.c)
|
||||
|
||||
'K' 'K' 'D' 0x00
|
||||
16 bit length value (this includes the length)
|
||||
0x00 0x00
|
||||
0x80 0x00 (0x80 seems to indicate a header)
|
||||
Then one of more of: 16 bit length field and a value of that size.
|
||||
For instance:
|
||||
0x0d 0x00 and 'AccessVersion' (AccessVersion is 13 bytes, 0x0d 0x00 intel order)
|
||||
|
||||
Next comes one of more rows of data. (column names, descriptions, etc...)
|
||||
16 bit length value (this includes the length)
|
||||
0x00 0x00
|
||||
0x00 0x00
|
||||
16bit length field (this include the length itself)
|
||||
4 bytes of unknown purpose
|
||||
16 bit length field (non-inclusive)
|
||||
value (07.53 for the AccessVersion example above)
|
||||
|
||||
See kkd.c for an example, although it needs cleanup.
|
||||
|
||||
336
Makefile
Normal file
336
Makefile
Normal file
@@ -0,0 +1,336 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = .
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = .
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
YACC = bison -y
|
||||
|
||||
SUBDIRS = src
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
DIST_COMMON = README AUTHORS COPYING COPYING.LIB ChangeLog INSTALL \
|
||||
Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \
|
||||
configure configure.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
$(ACLOCAL_M4): configure.in acinclude.m4
|
||||
cd $(srcdir) && $(ACLOCAL)
|
||||
|
||||
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
|
||||
$(SHELL) ./config.status --recheck
|
||||
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
|
||||
cd $(srcdir) && $(AUTOCONF)
|
||||
|
||||
# This directory's subdirectories are mostly independent; you can cd
|
||||
# into them and run `make' without going through this Makefile.
|
||||
# To change the values of `make' variables: instead of editing Makefiles,
|
||||
# (1) if the variable is set in `config.status', edit `config.status'
|
||||
# (which will cause the Makefiles to be regenerated when you run `make');
|
||||
# (2) otherwise, pass the desired values on the `make' command line.
|
||||
|
||||
|
||||
|
||||
all-recursive install-data-recursive install-exec-recursive \
|
||||
installdirs-recursive install-recursive uninstall-recursive \
|
||||
check-recursive installcheck-recursive info-recursive dvi-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
dot_seen=yes; \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done; \
|
||||
if test "$$dot_seen" = "no"; then \
|
||||
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||
fi; test -z "$$fail"
|
||||
|
||||
mostlyclean-recursive clean-recursive distclean-recursive \
|
||||
maintainer-clean-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
rev="$$subdir $$rev"; \
|
||||
test "$$subdir" = "." && dot_seen=yes; \
|
||||
done; \
|
||||
test "$$dot_seen" = "no" && rev=". $$rev"; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
for subdir in $$rev; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
tags-recursive:
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
||||
done
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
|
||||
fi; \
|
||||
done; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(PACKAGE)-$(VERSION)
|
||||
top_distdir = $(distdir)
|
||||
|
||||
# This target untars the dist file and tries a VPATH configuration. Then
|
||||
# it guarantees that the distribution is self-contained by making another
|
||||
# tarfile.
|
||||
distcheck: dist
|
||||
-rm -rf $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
|
||||
mkdir $(distdir)/=build
|
||||
mkdir $(distdir)/=inst
|
||||
dc_install_base=`cd $(distdir)/=inst && pwd`; \
|
||||
cd $(distdir)/=build \
|
||||
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) check \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) install \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) dist
|
||||
-rm -rf $(distdir)
|
||||
@banner="$(distdir).tar.gz is ready for distribution"; \
|
||||
dashes=`echo "$$banner" | sed s/./=/g`; \
|
||||
echo "$$dashes"; \
|
||||
echo "$$banner"; \
|
||||
echo "$$dashes"
|
||||
dist: distdir
|
||||
-chmod -R a+r $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
|
||||
-rm -rf $(distdir)
|
||||
dist-all: distdir
|
||||
-chmod -R a+r $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
|
||||
-rm -rf $(distdir)
|
||||
distdir: $(DISTFILES)
|
||||
-rm -rf $(distdir)
|
||||
mkdir $(distdir)
|
||||
-chmod 777 $(distdir)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
for subdir in $(SUBDIRS); do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -d $(distdir)/$$subdir \
|
||||
|| mkdir $(distdir)/$$subdir \
|
||||
|| exit 1; \
|
||||
chmod 777 $(distdir)/$$subdir; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|
||||
|| exit 1; \
|
||||
fi; \
|
||||
done
|
||||
info-am:
|
||||
info: info-recursive
|
||||
dvi-am:
|
||||
dvi: dvi-recursive
|
||||
check-am: all-am
|
||||
check: check-recursive
|
||||
installcheck-am:
|
||||
installcheck: installcheck-recursive
|
||||
install-exec-am:
|
||||
install-exec: install-exec-recursive
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-recursive
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-recursive
|
||||
uninstall-am:
|
||||
uninstall: uninstall-recursive
|
||||
all-am: Makefile
|
||||
all-redirect: all-recursive
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs: installdirs-recursive
|
||||
installdirs-am:
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-tags mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-recursive
|
||||
|
||||
clean-am: clean-tags clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-recursive
|
||||
|
||||
distclean-am: distclean-tags distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-recursive
|
||||
-rm -f config.status
|
||||
|
||||
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
|
||||
distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-recursive
|
||||
-rm -f config.status
|
||||
|
||||
.PHONY: install-data-recursive uninstall-data-recursive \
|
||||
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
|
||||
uninstalldirs-recursive all-recursive check-recursive \
|
||||
installcheck-recursive info-recursive dvi-recursive \
|
||||
mostlyclean-recursive distclean-recursive clean-recursive \
|
||||
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs-am \
|
||||
installdirs mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
3
Makefile.am
Normal file
3
Makefile.am
Normal file
@@ -0,0 +1,3 @@
|
||||
SUBDIRS = src
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
336
Makefile.in
Normal file
336
Makefile.in
Normal file
@@ -0,0 +1,336 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = .
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
YACC = @YACC@
|
||||
|
||||
SUBDIRS = src
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
DIST_COMMON = README AUTHORS COPYING COPYING.LIB ChangeLog INSTALL \
|
||||
Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \
|
||||
configure configure.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
$(ACLOCAL_M4): configure.in acinclude.m4
|
||||
cd $(srcdir) && $(ACLOCAL)
|
||||
|
||||
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
|
||||
$(SHELL) ./config.status --recheck
|
||||
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
|
||||
cd $(srcdir) && $(AUTOCONF)
|
||||
|
||||
# This directory's subdirectories are mostly independent; you can cd
|
||||
# into them and run `make' without going through this Makefile.
|
||||
# To change the values of `make' variables: instead of editing Makefiles,
|
||||
# (1) if the variable is set in `config.status', edit `config.status'
|
||||
# (which will cause the Makefiles to be regenerated when you run `make');
|
||||
# (2) otherwise, pass the desired values on the `make' command line.
|
||||
|
||||
@SET_MAKE@
|
||||
|
||||
all-recursive install-data-recursive install-exec-recursive \
|
||||
installdirs-recursive install-recursive uninstall-recursive \
|
||||
check-recursive installcheck-recursive info-recursive dvi-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
dot_seen=yes; \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done; \
|
||||
if test "$$dot_seen" = "no"; then \
|
||||
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||
fi; test -z "$$fail"
|
||||
|
||||
mostlyclean-recursive clean-recursive distclean-recursive \
|
||||
maintainer-clean-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
rev="$$subdir $$rev"; \
|
||||
test "$$subdir" = "." && dot_seen=yes; \
|
||||
done; \
|
||||
test "$$dot_seen" = "no" && rev=". $$rev"; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
for subdir in $$rev; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
tags-recursive:
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
||||
done
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
|
||||
fi; \
|
||||
done; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(PACKAGE)-$(VERSION)
|
||||
top_distdir = $(distdir)
|
||||
|
||||
# This target untars the dist file and tries a VPATH configuration. Then
|
||||
# it guarantees that the distribution is self-contained by making another
|
||||
# tarfile.
|
||||
distcheck: dist
|
||||
-rm -rf $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
|
||||
mkdir $(distdir)/=build
|
||||
mkdir $(distdir)/=inst
|
||||
dc_install_base=`cd $(distdir)/=inst && pwd`; \
|
||||
cd $(distdir)/=build \
|
||||
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) check \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) install \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
|
||||
&& $(MAKE) $(AM_MAKEFLAGS) dist
|
||||
-rm -rf $(distdir)
|
||||
@banner="$(distdir).tar.gz is ready for distribution"; \
|
||||
dashes=`echo "$$banner" | sed s/./=/g`; \
|
||||
echo "$$dashes"; \
|
||||
echo "$$banner"; \
|
||||
echo "$$dashes"
|
||||
dist: distdir
|
||||
-chmod -R a+r $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
|
||||
-rm -rf $(distdir)
|
||||
dist-all: distdir
|
||||
-chmod -R a+r $(distdir)
|
||||
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
|
||||
-rm -rf $(distdir)
|
||||
distdir: $(DISTFILES)
|
||||
-rm -rf $(distdir)
|
||||
mkdir $(distdir)
|
||||
-chmod 777 $(distdir)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
for subdir in $(SUBDIRS); do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -d $(distdir)/$$subdir \
|
||||
|| mkdir $(distdir)/$$subdir \
|
||||
|| exit 1; \
|
||||
chmod 777 $(distdir)/$$subdir; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|
||||
|| exit 1; \
|
||||
fi; \
|
||||
done
|
||||
info-am:
|
||||
info: info-recursive
|
||||
dvi-am:
|
||||
dvi: dvi-recursive
|
||||
check-am: all-am
|
||||
check: check-recursive
|
||||
installcheck-am:
|
||||
installcheck: installcheck-recursive
|
||||
install-exec-am:
|
||||
install-exec: install-exec-recursive
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-recursive
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-recursive
|
||||
uninstall-am:
|
||||
uninstall: uninstall-recursive
|
||||
all-am: Makefile
|
||||
all-redirect: all-recursive
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs: installdirs-recursive
|
||||
installdirs-am:
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-tags mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-recursive
|
||||
|
||||
clean-am: clean-tags clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-recursive
|
||||
|
||||
distclean-am: distclean-tags distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-recursive
|
||||
-rm -f config.status
|
||||
|
||||
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
|
||||
distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-recursive
|
||||
-rm -f config.status
|
||||
|
||||
.PHONY: install-data-recursive uninstall-data-recursive \
|
||||
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
|
||||
uninstalldirs-recursive all-recursive check-recursive \
|
||||
installcheck-recursive info-recursive dvi-recursive \
|
||||
mostlyclean-recursive distclean-recursive clean-recursive \
|
||||
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs-am \
|
||||
installdirs mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
4
NEWS
Normal file
4
NEWS
Normal file
@@ -0,0 +1,4 @@
|
||||
The organization of the project files has changed a bit from that last release.
|
||||
The autoconf stuff has been moved to the root directory. The include directory
|
||||
has also been moved from src/include to include
|
||||
|
||||
6
README
6
README
@@ -1,10 +1,10 @@
|
||||
This is mdbtools version 0.2
|
||||
This is mdbtools version 0.3
|
||||
|
||||
This software is alpha so don't expect too much unless you know C and
|
||||
This software is beta so don't expect too much unless you know C and
|
||||
probably a little something about databases and reverse engineering file
|
||||
formats, you're welcome to try it out but don't expect miracles.
|
||||
|
||||
For the rest of you, read the HACKERS file for a description of where the code
|
||||
For the rest of you, read the HACKING file for a description of where the code
|
||||
stands and what has been gleened of the file format.
|
||||
|
||||
The initial goal of these tools is to be able to extract data structures and
|
||||
|
||||
291
src/Makefile
Normal file
291
src/Makefile
Normal file
@@ -0,0 +1,291 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = ..
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = ..
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
YACC = bison -y
|
||||
|
||||
SUBDIRS = libmdb util extras sql
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
# This directory's subdirectories are mostly independent; you can cd
|
||||
# into them and run `make' without going through this Makefile.
|
||||
# To change the values of `make' variables: instead of editing Makefiles,
|
||||
# (1) if the variable is set in `config.status', edit `config.status'
|
||||
# (which will cause the Makefiles to be regenerated when you run `make');
|
||||
# (2) otherwise, pass the desired values on the `make' command line.
|
||||
|
||||
|
||||
|
||||
all-recursive install-data-recursive install-exec-recursive \
|
||||
installdirs-recursive install-recursive uninstall-recursive \
|
||||
check-recursive installcheck-recursive info-recursive dvi-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
dot_seen=yes; \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done; \
|
||||
if test "$$dot_seen" = "no"; then \
|
||||
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||
fi; test -z "$$fail"
|
||||
|
||||
mostlyclean-recursive clean-recursive distclean-recursive \
|
||||
maintainer-clean-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
rev="$$subdir $$rev"; \
|
||||
test "$$subdir" = "." && dot_seen=yes; \
|
||||
done; \
|
||||
test "$$dot_seen" = "no" && rev=". $$rev"; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
for subdir in $$rev; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
tags-recursive:
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
||||
done
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
|
||||
fi; \
|
||||
done; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
for subdir in $(SUBDIRS); do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -d $(distdir)/$$subdir \
|
||||
|| mkdir $(distdir)/$$subdir \
|
||||
|| exit 1; \
|
||||
chmod 777 $(distdir)/$$subdir; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
|
||||
|| exit 1; \
|
||||
fi; \
|
||||
done
|
||||
info-am:
|
||||
info: info-recursive
|
||||
dvi-am:
|
||||
dvi: dvi-recursive
|
||||
check-am: all-am
|
||||
check: check-recursive
|
||||
installcheck-am:
|
||||
installcheck: installcheck-recursive
|
||||
install-exec-am:
|
||||
install-exec: install-exec-recursive
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-recursive
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-recursive
|
||||
uninstall-am:
|
||||
uninstall: uninstall-recursive
|
||||
all-am: Makefile
|
||||
all-redirect: all-recursive
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs: installdirs-recursive
|
||||
installdirs-am:
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-tags mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-recursive
|
||||
|
||||
clean-am: clean-tags clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-recursive
|
||||
|
||||
distclean-am: distclean-tags distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-recursive
|
||||
|
||||
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
|
||||
distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-recursive
|
||||
|
||||
.PHONY: install-data-recursive uninstall-data-recursive \
|
||||
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
|
||||
uninstalldirs-recursive all-recursive check-recursive \
|
||||
installcheck-recursive info-recursive dvi-recursive \
|
||||
mostlyclean-recursive distclean-recursive clean-recursive \
|
||||
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs-am \
|
||||
installdirs mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
4
src/Makefile.am
Normal file
4
src/Makefile.am
Normal file
@@ -0,0 +1,4 @@
|
||||
SUBDIRS = libmdb util extras sql
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
|
||||
320
src/Makefile.in
320
src/Makefile.in
@@ -1,71 +1,291 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
SHELL = /bin/sh
|
||||
VPATH = @srcdir@
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
top_srcdir = @top_srcdir@
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
bindir = $(exec_prefix)/bin
|
||||
infodir = $(exec_prefix)/info
|
||||
libdir = $(exec_prefix)/lib
|
||||
mandir = $(exec_prefix)/man/man1
|
||||
|
||||
CC = @CC@
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
CFLAGS = $(CPPFLAG) @CFLAGS@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
LIBS = @LIBS@
|
||||
INSTALL= @INSTALL@
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = ..
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
RM = @RM@
|
||||
subdirs = libmdb util extras
|
||||
|
||||
all:
|
||||
@for dir in ${subdirs}; do \
|
||||
(cd $$dir && $(MAKE) all) \
|
||||
|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
clean:
|
||||
@for dir in ${subdirs} include; do \
|
||||
(cd $$dir && $(MAKE) clean && rm -f Makefile) \
|
||||
|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
|
||||
rm -f config.log config.status Makefile config.cache; \
|
||||
done && test -z "$$fail"
|
||||
install:
|
||||
@for dir in ${subdirs} include; do \
|
||||
(cd $$dir && $(MAKE) install) \
|
||||
|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
uninstall:
|
||||
@for dir in ${subdirs} include; do \
|
||||
(cd $$dir && $(MAKE) uninstall) \
|
||||
|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
YACC = @YACC@
|
||||
|
||||
SUBDIRS = libmdb util extras sql
|
||||
|
||||
DEFDIR = $(prefix)
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
# This directory's subdirectories are mostly independent; you can cd
|
||||
# into them and run `make' without going through this Makefile.
|
||||
# To change the values of `make' variables: instead of editing Makefiles,
|
||||
# (1) if the variable is set in `config.status', edit `config.status'
|
||||
# (which will cause the Makefiles to be regenerated when you run `make');
|
||||
# (2) otherwise, pass the desired values on the `make' command line.
|
||||
|
||||
@SET_MAKE@
|
||||
|
||||
all-recursive install-data-recursive install-exec-recursive \
|
||||
installdirs-recursive install-recursive uninstall-recursive \
|
||||
check-recursive installcheck-recursive info-recursive dvi-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
dot_seen=yes; \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done; \
|
||||
if test "$$dot_seen" = "no"; then \
|
||||
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
||||
fi; test -z "$$fail"
|
||||
|
||||
mostlyclean-recursive clean-recursive distclean-recursive \
|
||||
maintainer-clean-recursive:
|
||||
@set fnord $(MAKEFLAGS); amf=$$2; \
|
||||
dot_seen=no; \
|
||||
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
rev="$$subdir $$rev"; \
|
||||
test "$$subdir" = "." && dot_seen=yes; \
|
||||
done; \
|
||||
test "$$dot_seen" = "no" && rev=". $$rev"; \
|
||||
target=`echo $@ | sed s/-recursive//`; \
|
||||
for subdir in $$rev; do \
|
||||
echo "Making $$target in $$subdir"; \
|
||||
if test "$$subdir" = "."; then \
|
||||
local_target="$$target-am"; \
|
||||
else \
|
||||
local_target="$$target"; \
|
||||
fi; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
||||
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
|
||||
done && test -z "$$fail"
|
||||
tags-recursive:
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
||||
done
|
||||
|
||||
# automatic re-running of configure if the configure.in file has changed
|
||||
${srcdir}/configure: configure.in
|
||||
cd ${srcdir} && autoconf
|
||||
tags: TAGS
|
||||
|
||||
# autoheader might not change config.h.in so touch a stamp file
|
||||
${srcdir}/config.h.in: stamp-h.in
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
${srcdir}/stamp-h.in: configure.in
|
||||
cd ${srcdir} && autoheader
|
||||
echo timestamp > ${srcdir}/stamp-h.in
|
||||
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SUBDIRS)'; for subdir in $$list; do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
|
||||
fi; \
|
||||
done; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
config.h: stamp-h
|
||||
mostlyclean-tags:
|
||||
|
||||
stamp-h: config.h.in config.status
|
||||
./config.status
|
||||
clean-tags:
|
||||
|
||||
Makefile: Makefile.in config.status
|
||||
./config.status
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
config.status: configure
|
||||
./config.status --recheck
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
for subdir in $(SUBDIRS); do \
|
||||
if test "$$subdir" = .; then :; else \
|
||||
test -d $(distdir)/$$subdir \
|
||||
|| mkdir $(distdir)/$$subdir \
|
||||
|| exit 1; \
|
||||
chmod 777 $(distdir)/$$subdir; \
|
||||
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
|
||||
|| exit 1; \
|
||||
fi; \
|
||||
done
|
||||
info-am:
|
||||
info: info-recursive
|
||||
dvi-am:
|
||||
dvi: dvi-recursive
|
||||
check-am: all-am
|
||||
check: check-recursive
|
||||
installcheck-am:
|
||||
installcheck: installcheck-recursive
|
||||
install-exec-am:
|
||||
install-exec: install-exec-recursive
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-recursive
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-recursive
|
||||
uninstall-am:
|
||||
uninstall: uninstall-recursive
|
||||
all-am: Makefile
|
||||
all-redirect: all-recursive
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs: installdirs-recursive
|
||||
installdirs-am:
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-tags mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-recursive
|
||||
|
||||
clean-am: clean-tags clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-recursive
|
||||
|
||||
distclean-am: distclean-tags distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-recursive
|
||||
|
||||
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
|
||||
distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-recursive
|
||||
|
||||
.PHONY: install-data-recursive uninstall-data-recursive \
|
||||
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
|
||||
uninstalldirs-recursive all-recursive check-recursive \
|
||||
installcheck-recursive info-recursive dvi-recursive \
|
||||
mostlyclean-recursive distclean-recursive clean-recursive \
|
||||
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs-am \
|
||||
installdirs mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
|
||||
1550
src/configure
vendored
1550
src/configure
vendored
File diff suppressed because it is too large
Load Diff
@@ -1,31 +0,0 @@
|
||||
dnl Process this file with autoconf to produce a configure script.
|
||||
AC_INIT(extras/dump.c)
|
||||
|
||||
AC_PROG_CC(gcc)
|
||||
dnl Checks for programs.
|
||||
AC_PROG_MAKE_SET
|
||||
|
||||
dnl Checks for libraries.
|
||||
dnl Replace `main' with a function in -libs:
|
||||
AC_CHECK_LIB(ibs, main)
|
||||
dnl Replace `main' with a function in -lmdb:
|
||||
AC_CHECK_LIB(mdb, mdb_free_handle)
|
||||
|
||||
dnl Checks for header files.
|
||||
AC_HEADER_STDC
|
||||
AC_CHECK_HEADERS(fcntl.h limits.h unistd.h)
|
||||
|
||||
dnl Checks for typedefs, structures, and compiler characteristics.
|
||||
AC_C_CONST
|
||||
AC_TYPE_SIZE_T
|
||||
|
||||
OLDCFLAGS="$CFLAGS"
|
||||
CFLAGS=""
|
||||
AC_C_BIGENDIAN
|
||||
if test $ac_cv_c_bigendian = yes; then OLDCFLAGS="$OLDCFLAGS -DHW_BIG_ENDIAN";
|
||||
else OLDCFLAGS="$OLDCFLAGS -DHW_LITTLE_ENDIAN"; fi
|
||||
CFLAGS=$OLDCFLAGS
|
||||
|
||||
dnl Checks for library functions.
|
||||
|
||||
AC_OUTPUT(util/Makefile extras/Makefile Makefile libmdb/Makefile include/Makefile)
|
||||
344
src/extras/Makefile
Normal file
344
src/extras/Makefile
Normal file
@@ -0,0 +1,344 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = ../..
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
YACC = bison -y
|
||||
|
||||
bin_PROGRAMS = mdb-dump
|
||||
mdb_dump_SOURCES = mdb-dump.c mdbsupport.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir)
|
||||
CPPFLAGS =
|
||||
LDFLAGS =
|
||||
mdb_dump_OBJECTS = mdb-dump.o mdbsupport.o
|
||||
mdb_dump_LDADD = $(LDADD)
|
||||
mdb_dump_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_dump_LDFLAGS =
|
||||
CFLAGS = -g -O2
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/mdb-dump.P .deps/mdbsupport.P
|
||||
SOURCES = $(mdb_dump_SOURCES)
|
||||
OBJECTS = $(mdb_dump_OBJECTS)
|
||||
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extras/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-dump: $(mdb_dump_OBJECTS) $(mdb_dump_DEPENDENCIES)
|
||||
@rm -f mdb-dump
|
||||
$(LINK) $(mdb_dump_LDFLAGS) $(mdb_dump_OBJECTS) $(mdb_dump_LDADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/extras
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extras/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
5
src/extras/Makefile.am
Normal file
5
src/extras/Makefile.am
Normal file
@@ -0,0 +1,5 @@
|
||||
bin_PROGRAMS = mdb-dump
|
||||
mdb_dump_SOURCES = mdb-dump.c mdbsupport.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
@@ -1,45 +1,344 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
SHELL = /bin/sh
|
||||
VPATH = @srcdir@
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
top_srcdir = @top_srcdir@
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
bindir = $(exec_prefix)/bin
|
||||
infodir = $(exec_prefix)/info
|
||||
libdir = $(exec_prefix)/lib
|
||||
mandir = $(exec_prefix)/man/man1
|
||||
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
YACC = @YACC@
|
||||
|
||||
bin_PROGRAMS = mdb-dump
|
||||
mdb_dump_SOURCES = mdb-dump.c mdbsupport.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = @DEFS@ -I. -I$(srcdir)
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
CFLAGS = $(CPPFLAG) @CFLAGS@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
LIBS = @LIBS@
|
||||
INSTALL= @INSTALL@
|
||||
mdb_dump_OBJECTS = mdb-dump.o mdbsupport.o
|
||||
mdb_dump_LDADD = $(LDADD)
|
||||
mdb_dump_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_dump_LDFLAGS =
|
||||
CFLAGS = @CFLAGS@
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
PROGS = mdb-dump
|
||||
OBJS = dump.o
|
||||
|
||||
all: $(PROGS)
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
clean:
|
||||
rm -f core *.o $(PROGS)
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/mdb-dump.P .deps/mdbsupport.P
|
||||
SOURCES = $(mdb_dump_SOURCES)
|
||||
OBJECTS = $(mdb_dump_OBJECTS)
|
||||
|
||||
mdb-dump: dump.o
|
||||
$(CC) -g -o $@ $<
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extras/Makefile
|
||||
|
||||
.c.o:
|
||||
$(CC) $(CFLAGS) -g -c $<
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
install:
|
||||
@for prog in $(PROGS); do \
|
||||
echo " copying $$prog to $(bindir)"; \
|
||||
cp $$prog $(bindir); \
|
||||
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall:
|
||||
@for prog in $(PROGS); do \
|
||||
echo " removing $$prog from $(bindir)"; \
|
||||
rm -f $(bindir)/$$prog; \
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-dump: $(mdb_dump_OBJECTS) $(mdb_dump_DEPENDENCIES)
|
||||
@rm -f mdb-dump
|
||||
$(LINK) $(mdb_dump_LDFLAGS) $(mdb_dump_OBJECTS) $(mdb_dump_LDADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/extras
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extras/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
|
||||
@@ -1,6 +1,5 @@
|
||||
/* support routines for code generated by the util programs */
|
||||
|
||||
#include "util.h"
|
||||
#include <stdio.h>
|
||||
|
||||
void dump_int (int i)
|
||||
|
||||
344
src/libmdb/Makefile
Normal file
344
src/libmdb/Makefile
Normal file
@@ -0,0 +1,344 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = ../..
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
YACC = bison -y
|
||||
|
||||
lib_LTLIBRARIES = libmdb.la
|
||||
libmdb_la_SOURCES = catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
LTLIBRARIES = $(lib_LTLIBRARIES)
|
||||
|
||||
|
||||
DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir)
|
||||
CPPFLAGS =
|
||||
LDFLAGS =
|
||||
libmdb_la_LDFLAGS =
|
||||
libmdb_la_LIBADD =
|
||||
libmdb_la_OBJECTS = catalog.lo mem.lo file.lo kkd.lo table.lo data.lo \
|
||||
dump.lo backend.lo money.lo sargs.lo index.lo
|
||||
CFLAGS = -g -O2
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/backend.P .deps/catalog.P .deps/data.P .deps/dump.P \
|
||||
.deps/file.P .deps/index.P .deps/kkd.P .deps/mem.P .deps/money.P \
|
||||
.deps/sargs.P .deps/table.P
|
||||
SOURCES = $(libmdb_la_SOURCES)
|
||||
OBJECTS = $(libmdb_la_OBJECTS)
|
||||
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/libmdb/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-libLTLIBRARIES:
|
||||
|
||||
clean-libLTLIBRARIES:
|
||||
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
|
||||
|
||||
distclean-libLTLIBRARIES:
|
||||
|
||||
maintainer-clean-libLTLIBRARIES:
|
||||
|
||||
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(libdir)
|
||||
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall-libLTLIBRARIES:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(lib_LTLIBRARIES)'; for p in $$list; do \
|
||||
$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
libmdb.la: $(libmdb_la_OBJECTS) $(libmdb_la_DEPENDENCIES)
|
||||
$(LINK) -rpath $(libdir) $(libmdb_la_LDFLAGS) $(libmdb_la_OBJECTS) $(libmdb_la_LIBADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/libmdb
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/libmdb/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-libLTLIBRARIES
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-libLTLIBRARIES
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(LTLIBRARIES)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(libdir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-libLTLIBRARIES distclean-compile \
|
||||
distclean-libtool distclean-tags distclean-depend \
|
||||
distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
|
||||
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
|
||||
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
|
||||
distclean-compile clean-compile maintainer-clean-compile \
|
||||
mostlyclean-libtool distclean-libtool clean-libtool \
|
||||
maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
|
||||
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
|
||||
distclean-depend clean-depend maintainer-clean-depend info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs \
|
||||
mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
4
src/libmdb/Makefile.am
Normal file
4
src/libmdb/Makefile.am
Normal file
@@ -0,0 +1,4 @@
|
||||
lib_LTLIBRARIES = libmdb.la
|
||||
libmdb_la_SOURCES= catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LIBS = `glib-config --libs`
|
||||
@@ -1,59 +1,344 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
SHELL = /bin/sh
|
||||
VPATH = @srcdir@
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
top_srcdir = @top_srcdir@
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
bindir = $(exec_prefix)/bin
|
||||
infodir = $(exec_prefix)/info
|
||||
libdir = $(exec_prefix)/lib
|
||||
mandir = $(exec_prefix)/man/man1
|
||||
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
YACC = @YACC@
|
||||
|
||||
lib_LTLIBRARIES = libmdb.la
|
||||
libmdb_la_SOURCES = catalog.c mem.c file.c kkd.c table.c data.c dump.c backend.c money.c sargs.c index.c
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
LTLIBRARIES = $(lib_LTLIBRARIES)
|
||||
|
||||
|
||||
DEFS = @DEFS@ -I. -I$(srcdir)
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
CFLAGS = $(CPPFLAG) @CFLAGS@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
LIBS = @LIBS@
|
||||
INSTALL= @INSTALL@
|
||||
LIBLIST = libmdb.a
|
||||
libmdb_la_LDFLAGS =
|
||||
libmdb_la_LIBADD =
|
||||
libmdb_la_OBJECTS = catalog.lo mem.lo file.lo kkd.lo table.lo data.lo \
|
||||
dump.lo backend.lo money.lo sargs.lo index.lo
|
||||
CFLAGS = @CFLAGS@
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
INC = -I ../include `glib-config --cflags`
|
||||
OBJS = catalog.o mem.o file.o kkd.o table.o data.o dump.o backend.o money.o sargs.o index.o
|
||||
|
||||
all: libmdb
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
libmdb: $(OBJS)
|
||||
rm -f libmdb.a
|
||||
ar cq libmdb.a $(OBJS)
|
||||
clean:
|
||||
rm -f core *.o *.a
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/backend.P .deps/catalog.P .deps/data.P .deps/dump.P \
|
||||
.deps/file.P .deps/index.P .deps/kkd.P .deps/mem.P .deps/money.P \
|
||||
.deps/sargs.P .deps/table.P
|
||||
SOURCES = $(libmdb_la_SOURCES)
|
||||
OBJECTS = $(libmdb_la_OBJECTS)
|
||||
|
||||
.c.o:
|
||||
$(CC) $(CFLAGS) -g -c $< $(INC)
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/libmdb/Makefile
|
||||
|
||||
install:
|
||||
@for lib in $(LIBLIST); do \
|
||||
echo " copying $$lib to $(libdir)"; \
|
||||
cp $$lib $(libdir); \
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-libLTLIBRARIES:
|
||||
|
||||
clean-libLTLIBRARIES:
|
||||
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
|
||||
|
||||
distclean-libLTLIBRARIES:
|
||||
|
||||
maintainer-clean-libLTLIBRARIES:
|
||||
|
||||
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(libdir)
|
||||
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall:
|
||||
@for lib in $(LIBLIST); do \
|
||||
echo " copying $$lib to $(libdir)"; \
|
||||
rm -f $(libdir)/$$lib; \
|
||||
uninstall-libLTLIBRARIES:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(lib_LTLIBRARIES)'; for p in $$list; do \
|
||||
$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
|
||||
done
|
||||
|
||||
backend.o: backend.c ../include/mdbtools.h
|
||||
catalog.o: catalog.c ../include/mdbtools.h
|
||||
data.o: data.c ../include/mdbtools.h
|
||||
dump.o: dump.c ../include/mdbtools.h
|
||||
file.o: file.c ../include/mdbtools.h
|
||||
kkd.o: kkd.c ../include/mdbtools.h
|
||||
mem.o: mem.c ../include/mdbtools.h
|
||||
table.o: table.c ../include/mdbtools.h
|
||||
sargs.o: sargs.c ../include/mdbtools.h
|
||||
index.o: sargs.c ../include/mdbtools.h
|
||||
money.o: money.c
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
libmdb.la: $(libmdb_la_OBJECTS) $(libmdb_la_DEPENDENCIES)
|
||||
$(LINK) -rpath $(libdir) $(libmdb_la_LDFLAGS) $(libmdb_la_OBJECTS) $(libmdb_la_LIBADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/libmdb
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/libmdb/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-libLTLIBRARIES
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-libLTLIBRARIES
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(LTLIBRARIES)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(libdir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-libLTLIBRARIES distclean-compile \
|
||||
distclean-libtool distclean-tags distclean-depend \
|
||||
distclean-generic clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
|
||||
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
|
||||
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
|
||||
distclean-compile clean-compile maintainer-clean-compile \
|
||||
mostlyclean-libtool distclean-libtool clean-libtool \
|
||||
maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
|
||||
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
|
||||
distclean-depend clean-depend maintainer-clean-depend info-am info \
|
||||
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
|
||||
install-exec install-data-am install-data install-am install \
|
||||
uninstall-am uninstall all-redirect all-am all installdirs \
|
||||
mostlyclean-generic distclean-generic clean-generic \
|
||||
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
|
||||
BIN
src/libmdb/libmdb.a
Normal file
BIN
src/libmdb/libmdb.a
Normal file
Binary file not shown.
366
src/sql/Makefile
366
src/sql/Makefile
@@ -1,30 +1,356 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
LEX = flex -i
|
||||
YACC = yacc -d
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = ../..
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
|
||||
bin_PROGRAMS = mdb-sql
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs` $(READLINE_LIBS) -lfl
|
||||
mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l
|
||||
YACC = yacc -d
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir)
|
||||
CPPFLAGS =
|
||||
CFLAGS = $(CPPFLAG) -g -O2 -DHW_LITTLE_ENDIAN
|
||||
LDFLAGS =
|
||||
LIBS = -L ../libmdb -lmdb -ll `glib-config --libs` -lreadline -lncurses
|
||||
mdb_sql_OBJECTS = mdbsql.o main.o parser.o lexer.o
|
||||
mdb_sql_LDADD = $(LDADD)
|
||||
mdb_sql_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_sql_LDFLAGS =
|
||||
LEX_OUTPUT_ROOT = lex.yy
|
||||
LEXLIB = -lfl
|
||||
CFLAGS = -g -O2
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in lexer.c parser.c
|
||||
|
||||
INC = -I ../include `glib-config --cflags` -I/usr/include/readline
|
||||
OBJS = y.tab.o lex.yy.o mdbsql.o main.o
|
||||
|
||||
all: sql
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
libmdb: $(OBJS)
|
||||
rm -f libmdb.a
|
||||
ar cq libmdb.a $(OBJS)
|
||||
clean:
|
||||
rm -f core *.o *.a y.tab.* lex.yy.c sql
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/lexer.P .deps/main.P .deps/mdbsql.P .deps/parser.P
|
||||
SOURCES = $(mdb_sql_SOURCES)
|
||||
OBJECTS = $(mdb_sql_OBJECTS)
|
||||
|
||||
lex.yy.c: sql.l
|
||||
$(LEX) $<
|
||||
y.tab.c: sql.y
|
||||
$(YACC) $<
|
||||
.c.o:
|
||||
$(CC) $(CFLAGS) -g -c $< $(INC)
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .l .lo .o .s .y
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sql/Makefile
|
||||
|
||||
sql: $(OBJS)
|
||||
$(CC) -o $@ $(LDFLAGS) $(OBJS) $(LIBS)
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-sql: $(mdb_sql_OBJECTS) $(mdb_sql_DEPENDENCIES)
|
||||
@rm -f mdb-sql
|
||||
$(LINK) $(mdb_sql_LDFLAGS) $(mdb_sql_OBJECTS) $(mdb_sql_LDADD) $(LIBS)
|
||||
.l.c:
|
||||
$(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
|
||||
.y.c:
|
||||
$(YACC) $(AM_YFLAGS) $(YFLAGS) $< && mv y.tab.c $*.c
|
||||
if test -f y.tab.h; then \
|
||||
if cmp -s y.tab.h $*.h; then rm -f y.tab.h; else mv y.tab.h $*.h; fi; \
|
||||
else :; fi
|
||||
parser.h: parser.c
|
||||
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/sql
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sql/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
-test -z "lexerlparserhparserc" || rm -f lexerl parserh parserc
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
|
||||
6
src/sql/Makefile.am
Normal file
6
src/sql/Makefile.am
Normal file
@@ -0,0 +1,6 @@
|
||||
bin_PROGRAMS = mdb-sql
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs` $(READLINE_LIBS) @LEXLIB@
|
||||
mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l
|
||||
YACC = yacc -d
|
||||
356
src/sql/Makefile.in
Normal file
356
src/sql/Makefile.in
Normal file
@@ -0,0 +1,356 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
|
||||
bin_PROGRAMS = mdb-sql
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs` $(READLINE_LIBS) @LEXLIB@
|
||||
mdb_sql_SOURCES = mdbsql.c main.c parser.y lexer.l
|
||||
YACC = yacc -d
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = @DEFS@ -I. -I$(srcdir)
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
mdb_sql_OBJECTS = mdbsql.o main.o parser.o lexer.o
|
||||
mdb_sql_LDADD = $(LDADD)
|
||||
mdb_sql_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_sql_LDFLAGS =
|
||||
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
|
||||
LEXLIB = @LEXLIB@
|
||||
CFLAGS = @CFLAGS@
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in lexer.c parser.c
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/lexer.P .deps/main.P .deps/mdbsql.P .deps/parser.P
|
||||
SOURCES = $(mdb_sql_SOURCES)
|
||||
OBJECTS = $(mdb_sql_OBJECTS)
|
||||
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .l .lo .o .s .y
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sql/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-sql: $(mdb_sql_OBJECTS) $(mdb_sql_DEPENDENCIES)
|
||||
@rm -f mdb-sql
|
||||
$(LINK) $(mdb_sql_LDFLAGS) $(mdb_sql_OBJECTS) $(mdb_sql_LDADD) $(LIBS)
|
||||
.l.c:
|
||||
$(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
|
||||
.y.c:
|
||||
$(YACC) $(AM_YFLAGS) $(YFLAGS) $< && mv y.tab.c $*.c
|
||||
if test -f y.tab.h; then \
|
||||
if cmp -s y.tab.h $*.h; then rm -f y.tab.h; else mv y.tab.h $*.h; fi; \
|
||||
else :; fi
|
||||
parser.h: parser.c
|
||||
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/sql
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sql/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
-test -z "lexerlparserhparserc" || rm -f lexerl parserh parserc
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
30
src/sql/Makefile.orig
Normal file
30
src/sql/Makefile.orig
Normal file
@@ -0,0 +1,30 @@
|
||||
SHELL = /bin/sh
|
||||
LEX = flex -i
|
||||
YACC = yacc -d
|
||||
CC = gcc
|
||||
CPPFLAGS =
|
||||
CFLAGS = $(CPPFLAG) -g -O2 -DHW_LITTLE_ENDIAN
|
||||
LDFLAGS =
|
||||
LIBS = -L ../libmdb -lmdb -ll `glib-config --libs` -lreadline -lncurses
|
||||
|
||||
INC = -I ../include `glib-config --cflags` -I/usr/include/readline
|
||||
OBJS = y.tab.o lex.yy.o mdbsql.o main.o
|
||||
|
||||
all: mdb-sql
|
||||
|
||||
libmdb: $(OBJS)
|
||||
rm -f libmdb.a
|
||||
ar cq libmdb.a $(OBJS)
|
||||
clean:
|
||||
rm -f core *.o *.a y.tab.* lex.yy.c mdb-sql
|
||||
|
||||
lex.yy.c: sql.l
|
||||
$(LEX) $<
|
||||
y.tab.c: sql.y
|
||||
$(YACC) $<
|
||||
.c.o:
|
||||
$(CC) $(CFLAGS) -g -c $< $(INC)
|
||||
|
||||
sql: $(OBJS)
|
||||
$(CC) -o $@ $(LDFLAGS) $(OBJS) $(LIBS)
|
||||
|
||||
1655
src/sql/lexer.c
Normal file
1655
src/sql/lexer.c
Normal file
File diff suppressed because it is too large
Load Diff
@@ -1,7 +1,7 @@
|
||||
%{
|
||||
#include "y.tab.h"
|
||||
#include <string.h>
|
||||
#include "mdbsql.h"
|
||||
#include "parser.h"
|
||||
|
||||
extern MdbSQL *g_sql;
|
||||
%}
|
||||
@@ -1,5 +1,7 @@
|
||||
#include <stdio.h>
|
||||
#include <readline.h>
|
||||
#ifdef HAVE_READLINE
|
||||
#include <readline/readline.h>
|
||||
#endif
|
||||
#include <string.h>
|
||||
#include "mdbsql.h"
|
||||
|
||||
@@ -7,6 +9,30 @@ extern MdbSQL *g_sql;
|
||||
|
||||
char *g_input_ptr;
|
||||
|
||||
#ifndef HAVE_READLINE
|
||||
char *readline(char *prompt)
|
||||
{
|
||||
char *buf, line[1000];
|
||||
int i = 0;
|
||||
|
||||
printf("%s",prompt);
|
||||
fgets(line,1000,stdin);
|
||||
for (i=strlen(line);i>0;i--) {
|
||||
if (line[i]=='\n') {
|
||||
line[i]='\0';
|
||||
break;
|
||||
}
|
||||
}
|
||||
buf = (char *) malloc(strlen(line)+1);
|
||||
strcpy(buf,line);
|
||||
|
||||
return buf;
|
||||
}
|
||||
add_history(char *s)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
int mdb_sql_yyinput(char *buf, int need)
|
||||
{
|
||||
int cplen, have;
|
||||
|
||||
@@ -1,48 +0,0 @@
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <glib.h>
|
||||
#include <mdbtools.h>
|
||||
|
||||
typedef struct {
|
||||
MdbHandle *mdb;
|
||||
int all_columns;
|
||||
int num_columns;
|
||||
GPtrArray *columns;
|
||||
int num_tables;
|
||||
GPtrArray *tables;
|
||||
int num_sargs;
|
||||
GPtrArray *sargs;
|
||||
} MdbSQL;
|
||||
|
||||
typedef struct {
|
||||
char *name;
|
||||
int disp_size;
|
||||
} MdbSQLColumn;
|
||||
|
||||
typedef struct {
|
||||
char *name;
|
||||
char *alias;
|
||||
} MdbSQLTable;
|
||||
|
||||
typedef struct {
|
||||
char *col_name;
|
||||
MdbSarg *sarg;
|
||||
} MdbSQLSarg;
|
||||
|
||||
#undef YY_INPUT
|
||||
#define YY_INPUT(b, r, ms) (r = mdb_sql_yyinput(b, ms));
|
||||
|
||||
MdbSQL *mdb_sql_init();
|
||||
MdbSQLSarg *mdb_sql_alloc_sarg();
|
||||
MdbSQLColumn *mdb_sql_alloc_column();
|
||||
MdbSQLTable *mdb_sql_alloc_table();
|
||||
MdbHandle *mdb_sql_open(MdbSQL *sql, char *db_name);
|
||||
int mdb_sql_add_sarg(MdbSQL *sql, char *col_name, int op, char *constant);
|
||||
int mdb_sql_all_columns(MdbSQL *sql);
|
||||
int mdb_sql_add_column(MdbSQL *sql, char *column_name);
|
||||
int mdb_sql_add_table(MdbSQL *sql, char *table_name);
|
||||
void mdb_sql_dump(MdbSQL *sql);
|
||||
void mdb_sql_exit(MdbSQL *sql);
|
||||
void mdb_sql_reset(MdbSQL *sql);
|
||||
void mdb_sql_listtables(MdbSQL *sql);
|
||||
void mdb_sql_select(MdbSQL *sql);
|
||||
443
src/sql/parser.c
Normal file
443
src/sql/parser.c
Normal file
@@ -0,0 +1,443 @@
|
||||
#ifndef lint
|
||||
static char yysccsid[] = "@(#)yaccpar 1.9 (Berkeley) 02/21/93";
|
||||
#endif
|
||||
#define YYBYACC 1
|
||||
#define YYMAJOR 1
|
||||
#define YYMINOR 9
|
||||
#define yyclearin (yychar=(-1))
|
||||
#define yyerrok (yyerrflag=0)
|
||||
#define YYRECOVERING (yyerrflag!=0)
|
||||
#define YYPREFIX "yy"
|
||||
#line 2 "parser.y"
|
||||
#include "mdbsql.h"
|
||||
|
||||
MdbSQL *g_sql;
|
||||
#line 7 "parser.y"
|
||||
typedef union {
|
||||
char *name;
|
||||
double dval;
|
||||
int ival;
|
||||
} YYSTYPE;
|
||||
#line 22 "y.tab.c"
|
||||
#define NAME 257
|
||||
#define PATH 258
|
||||
#define NUMBER 259
|
||||
#define STRING 260
|
||||
#define SELECT 261
|
||||
#define FROM 262
|
||||
#define WHERE 263
|
||||
#define CONNECT 264
|
||||
#define TO 265
|
||||
#define LIST 266
|
||||
#define TABLES 267
|
||||
#define AND 268
|
||||
#define YYERRCODE 256
|
||||
short yylhs[] = { -1,
|
||||
0, 0, 0, 3, 3, 5, 5, 6, 6, 7,
|
||||
7, 7, 8, 8, 4, 4, 2, 1, 1, 1,
|
||||
9,
|
||||
};
|
||||
short yylen[] = { 2,
|
||||
5, 3, 2, 0, 2, 1, 3, 3, 3, 1,
|
||||
1, 1, 1, 1, 1, 1, 1, 1, 1, 3,
|
||||
1,
|
||||
};
|
||||
short yydefred[] = { 0,
|
||||
0, 0, 0, 0, 21, 18, 0, 0, 0, 3,
|
||||
0, 0, 16, 15, 2, 17, 0, 20, 0, 1,
|
||||
0, 13, 14, 5, 0, 0, 10, 11, 12, 0,
|
||||
0, 0, 8, 7, 9,
|
||||
};
|
||||
short yydgoto[] = { 4,
|
||||
7, 17, 20, 15, 24, 25, 30, 26, 8,
|
||||
};
|
||||
short yysindex[] = { -260,
|
||||
-42, -251, -250, 0, 0, 0, -246, -29, -255, 0,
|
||||
-239, -42, 0, 0, 0, 0, -244, 0, -252, 0,
|
||||
-51, 0, 0, 0, -248, -51, 0, 0, 0, -247,
|
||||
-252, -236, 0, 0, 0,
|
||||
};
|
||||
short yyrindex[] = { 0,
|
||||
0, 0, 0, 0, 0, 0, 0, -240, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 23, 0, 0, 0,
|
||||
0, 0, 0, 0, 24, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0,
|
||||
};
|
||||
short yygindex[] = { 0,
|
||||
13, 0, 0, 0, -5, 0, 1, -2, 0,
|
||||
};
|
||||
#define YYTABLESIZE 215
|
||||
short yytable[] = { 6,
|
||||
1, 13, 14, 2, 21, 3, 22, 23, 29, 27,
|
||||
28, 22, 23, 9, 12, 11, 10, 16, 19, 31,
|
||||
35, 19, 4, 6, 18, 34, 32, 33, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 5,
|
||||
};
|
||||
short yycheck[] = { 42,
|
||||
261, 257, 258, 264, 257, 266, 259, 260, 60, 61,
|
||||
62, 259, 260, 265, 44, 262, 267, 257, 263, 268,
|
||||
257, 262, 0, 0, 12, 31, 26, 30, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, -1, 257,
|
||||
};
|
||||
#define YYFINAL 4
|
||||
#ifndef YYDEBUG
|
||||
#define YYDEBUG 0
|
||||
#endif
|
||||
#define YYMAXTOKEN 268
|
||||
#if YYDEBUG
|
||||
char *yyname[] = {
|
||||
"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
||||
0,0,0,0,0,0,0,0,"'*'",0,"','",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"'<'","'='","'>'",0,
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"NAME","PATH",
|
||||
"NUMBER","STRING","SELECT","FROM","WHERE","CONNECT","TO","LIST","TABLES","AND",
|
||||
};
|
||||
char *yyrule[] = {
|
||||
"$accept : query",
|
||||
"query : SELECT column_list FROM table where_clause",
|
||||
"query : CONNECT TO database",
|
||||
"query : LIST TABLES",
|
||||
"where_clause :",
|
||||
"where_clause : WHERE sarg_list",
|
||||
"sarg_list : sarg",
|
||||
"sarg_list : sarg AND sarg_list",
|
||||
"sarg : NAME operator constant",
|
||||
"sarg : constant operator NAME",
|
||||
"operator : '='",
|
||||
"operator : '>'",
|
||||
"operator : '<'",
|
||||
"constant : NUMBER",
|
||||
"constant : STRING",
|
||||
"database : PATH",
|
||||
"database : NAME",
|
||||
"table : NAME",
|
||||
"column_list : '*'",
|
||||
"column_list : column",
|
||||
"column_list : column ',' column_list",
|
||||
"column : NAME",
|
||||
};
|
||||
#endif
|
||||
#ifdef YYSTACKSIZE
|
||||
#undef YYMAXDEPTH
|
||||
#define YYMAXDEPTH YYSTACKSIZE
|
||||
#else
|
||||
#ifdef YYMAXDEPTH
|
||||
#define YYSTACKSIZE YYMAXDEPTH
|
||||
#else
|
||||
#define YYSTACKSIZE 500
|
||||
#define YYMAXDEPTH 500
|
||||
#endif
|
||||
#endif
|
||||
int yydebug;
|
||||
int yynerrs;
|
||||
int yyerrflag;
|
||||
int yychar;
|
||||
short *yyssp;
|
||||
YYSTYPE *yyvsp;
|
||||
YYSTYPE yyval;
|
||||
YYSTYPE yylval;
|
||||
short yyss[YYSTACKSIZE];
|
||||
YYSTYPE yyvs[YYSTACKSIZE];
|
||||
#define yystacksize YYSTACKSIZE
|
||||
#define YYABORT goto yyabort
|
||||
#define YYREJECT goto yyabort
|
||||
#define YYACCEPT goto yyaccept
|
||||
#define YYERROR goto yyerrlab
|
||||
int
|
||||
yyparse()
|
||||
{
|
||||
register int yym, yyn, yystate;
|
||||
#if YYDEBUG
|
||||
register char *yys;
|
||||
extern char *getenv();
|
||||
|
||||
if (yys = getenv("YYDEBUG"))
|
||||
{
|
||||
yyn = *yys;
|
||||
if (yyn >= '0' && yyn <= '9')
|
||||
yydebug = yyn - '0';
|
||||
}
|
||||
#endif
|
||||
|
||||
yynerrs = 0;
|
||||
yyerrflag = 0;
|
||||
yychar = (-1);
|
||||
|
||||
yyssp = yyss;
|
||||
yyvsp = yyvs;
|
||||
*yyssp = yystate = 0;
|
||||
|
||||
yyloop:
|
||||
if (yyn = yydefred[yystate]) goto yyreduce;
|
||||
if (yychar < 0)
|
||||
{
|
||||
if ((yychar = yylex()) < 0) yychar = 0;
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
{
|
||||
yys = 0;
|
||||
if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
|
||||
if (!yys) yys = "illegal-symbol";
|
||||
printf("%sdebug: state %d, reading %d (%s)\n",
|
||||
YYPREFIX, yystate, yychar, yys);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
|
||||
yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
|
||||
{
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: state %d, shifting to state %d\n",
|
||||
YYPREFIX, yystate, yytable[yyn]);
|
||||
#endif
|
||||
if (yyssp >= yyss + yystacksize - 1)
|
||||
{
|
||||
goto yyoverflow;
|
||||
}
|
||||
*++yyssp = yystate = yytable[yyn];
|
||||
*++yyvsp = yylval;
|
||||
yychar = (-1);
|
||||
if (yyerrflag > 0) --yyerrflag;
|
||||
goto yyloop;
|
||||
}
|
||||
if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
|
||||
yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
|
||||
{
|
||||
yyn = yytable[yyn];
|
||||
goto yyreduce;
|
||||
}
|
||||
if (yyerrflag) goto yyinrecovery;
|
||||
#ifdef lint
|
||||
goto yynewerror;
|
||||
#endif
|
||||
yynewerror:
|
||||
yyerror("syntax error");
|
||||
#ifdef lint
|
||||
goto yyerrlab;
|
||||
#endif
|
||||
yyerrlab:
|
||||
++yynerrs;
|
||||
yyinrecovery:
|
||||
if (yyerrflag < 3)
|
||||
{
|
||||
yyerrflag = 3;
|
||||
for (;;)
|
||||
{
|
||||
if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
|
||||
yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
|
||||
{
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: state %d, error recovery shifting\
|
||||
to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
|
||||
#endif
|
||||
if (yyssp >= yyss + yystacksize - 1)
|
||||
{
|
||||
goto yyoverflow;
|
||||
}
|
||||
*++yyssp = yystate = yytable[yyn];
|
||||
*++yyvsp = yylval;
|
||||
goto yyloop;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: error recovery discarding state %d\n",
|
||||
YYPREFIX, *yyssp);
|
||||
#endif
|
||||
if (yyssp <= yyss) goto yyabort;
|
||||
--yyssp;
|
||||
--yyvsp;
|
||||
}
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
if (yychar == 0) goto yyabort;
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
{
|
||||
yys = 0;
|
||||
if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
|
||||
if (!yys) yys = "illegal-symbol";
|
||||
printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
|
||||
YYPREFIX, yystate, yychar, yys);
|
||||
}
|
||||
#endif
|
||||
yychar = (-1);
|
||||
goto yyloop;
|
||||
}
|
||||
yyreduce:
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: state %d, reducing by rule %d (%s)\n",
|
||||
YYPREFIX, yystate, yyn, yyrule[yyn]);
|
||||
#endif
|
||||
yym = yylen[yyn];
|
||||
yyval = yyvsp[1-yym];
|
||||
switch (yyn)
|
||||
{
|
||||
case 1:
|
||||
#line 19 "parser.y"
|
||||
{
|
||||
mdb_sql_select(g_sql);
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
#line 22 "parser.y"
|
||||
{
|
||||
mdb_sql_open(g_sql, yyvsp[0].name); free(yyvsp[0].name);
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
#line 25 "parser.y"
|
||||
{
|
||||
mdb_sql_listtables(g_sql);
|
||||
}
|
||||
break;
|
||||
case 8:
|
||||
#line 41 "parser.y"
|
||||
{
|
||||
mdb_sql_add_sarg(g_sql, yyvsp[-2].name, yyvsp[-1].ival, yyvsp[0].name);
|
||||
free(yyvsp[-2].name);
|
||||
free(yyvsp[0].name);
|
||||
}
|
||||
break;
|
||||
case 9:
|
||||
#line 46 "parser.y"
|
||||
{
|
||||
mdb_sql_add_sarg(g_sql, yyvsp[0].name, yyvsp[-1].ival, yyvsp[-2].name);
|
||||
free(yyvsp[-2].name);
|
||||
free(yyvsp[0].name);
|
||||
}
|
||||
break;
|
||||
case 10:
|
||||
#line 54 "parser.y"
|
||||
{ yyval.ival = MDB_EQUAL; }
|
||||
break;
|
||||
case 11:
|
||||
#line 55 "parser.y"
|
||||
{ yyval.ival = MDB_GT; }
|
||||
break;
|
||||
case 12:
|
||||
#line 56 "parser.y"
|
||||
{ yyval.ival = MDB_LT; }
|
||||
break;
|
||||
case 13:
|
||||
#line 59 "parser.y"
|
||||
{ yyval.name = yyvsp[0].name; }
|
||||
break;
|
||||
case 14:
|
||||
#line 60 "parser.y"
|
||||
{ yyval.name = yyvsp[0].name; }
|
||||
break;
|
||||
case 17:
|
||||
#line 68 "parser.y"
|
||||
{ mdb_sql_add_table(g_sql, yyvsp[0].name); free(yyvsp[0].name); }
|
||||
break;
|
||||
case 18:
|
||||
#line 72 "parser.y"
|
||||
{ mdb_sql_all_columns(g_sql); }
|
||||
break;
|
||||
case 21:
|
||||
#line 78 "parser.y"
|
||||
{ mdb_sql_add_column(g_sql, yyvsp[0].name); free(yyvsp[0].name); }
|
||||
break;
|
||||
#line 388 "y.tab.c"
|
||||
}
|
||||
yyssp -= yym;
|
||||
yystate = *yyssp;
|
||||
yyvsp -= yym;
|
||||
yym = yylhs[yyn];
|
||||
if (yystate == 0 && yym == 0)
|
||||
{
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: after reduction, shifting from state 0 to\
|
||||
state %d\n", YYPREFIX, YYFINAL);
|
||||
#endif
|
||||
yystate = YYFINAL;
|
||||
*++yyssp = YYFINAL;
|
||||
*++yyvsp = yyval;
|
||||
if (yychar < 0)
|
||||
{
|
||||
if ((yychar = yylex()) < 0) yychar = 0;
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
{
|
||||
yys = 0;
|
||||
if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
|
||||
if (!yys) yys = "illegal-symbol";
|
||||
printf("%sdebug: state %d, reading %d (%s)\n",
|
||||
YYPREFIX, YYFINAL, yychar, yys);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
if (yychar == 0) goto yyaccept;
|
||||
goto yyloop;
|
||||
}
|
||||
if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
|
||||
yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
|
||||
yystate = yytable[yyn];
|
||||
else
|
||||
yystate = yydgoto[yym];
|
||||
#if YYDEBUG
|
||||
if (yydebug)
|
||||
printf("%sdebug: after reduction, shifting from state %d \
|
||||
to state %d\n", YYPREFIX, *yyssp, yystate);
|
||||
#endif
|
||||
if (yyssp >= yyss + yystacksize - 1)
|
||||
{
|
||||
goto yyoverflow;
|
||||
}
|
||||
*++yyssp = yystate;
|
||||
*++yyvsp = yyval;
|
||||
goto yyloop;
|
||||
yyoverflow:
|
||||
yyerror("yacc stack overflow");
|
||||
yyabort:
|
||||
return (1);
|
||||
yyaccept:
|
||||
return (0);
|
||||
}
|
||||
18
src/sql/parser.h
Normal file
18
src/sql/parser.h
Normal file
@@ -0,0 +1,18 @@
|
||||
#define NAME 257
|
||||
#define PATH 258
|
||||
#define NUMBER 259
|
||||
#define STRING 260
|
||||
#define SELECT 261
|
||||
#define FROM 262
|
||||
#define WHERE 263
|
||||
#define CONNECT 264
|
||||
#define TO 265
|
||||
#define LIST 266
|
||||
#define TABLES 267
|
||||
#define AND 268
|
||||
typedef union {
|
||||
char *name;
|
||||
double dval;
|
||||
int ival;
|
||||
} YYSTYPE;
|
||||
extern YYSTYPE yylval;
|
||||
437
src/util/Makefile
Normal file
437
src/util/Makefile
Normal file
@@ -0,0 +1,437 @@
|
||||
# Generated automatically from Makefile.in by configure.
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
srcdir = .
|
||||
top_srcdir = ../..
|
||||
prefix = /usr/local
|
||||
exec_prefix = ${prefix}
|
||||
|
||||
bindir = ${exec_prefix}/bin
|
||||
sbindir = ${exec_prefix}/sbin
|
||||
libexecdir = ${exec_prefix}/libexec
|
||||
datadir = ${prefix}/share
|
||||
sysconfdir = ${prefix}/etc
|
||||
sharedstatedir = ${prefix}/com
|
||||
localstatedir = ${prefix}/var
|
||||
libdir = ${exec_prefix}/lib
|
||||
infodir = ${prefix}/info
|
||||
mandir = ${prefix}/man
|
||||
includedir = ${prefix}/include
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/mdbtools
|
||||
pkglibdir = $(libdir)/mdbtools
|
||||
pkgincludedir = $(includedir)/mdbtools
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = aclocal
|
||||
AUTOCONF = autoconf
|
||||
AUTOMAKE = automake
|
||||
AUTOHEADER = autoheader
|
||||
|
||||
INSTALL = /usr/bin/install -c
|
||||
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = ${INSTALL} -m 644
|
||||
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
|
||||
transform = s,x,x,
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = i686-pc-linux-gnu
|
||||
host_triplet = i686-pc-linux-gnu
|
||||
AS = @AS@
|
||||
CC = gcc
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = /usr/bin/ld
|
||||
LEX = flex
|
||||
LIBTOOL = $(SHELL) $(top_builddir)/libtool
|
||||
LN_S = ln -s
|
||||
MAKEINFO = makeinfo
|
||||
NM = /usr/bin/nm -B
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = mdbtools
|
||||
RANLIB = ranlib
|
||||
READLINE_LIBS = -lncurses -lreadline
|
||||
VERSION = 0.3
|
||||
YACC = bison -y
|
||||
|
||||
bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = -DPACKAGE=\"mdbtools\" -DVERSION=\"0.3\" -DYYTEXT_POINTER=1 -DSTDC_HEADERS=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_READLINE=1 -I. -I$(srcdir)
|
||||
CPPFLAGS =
|
||||
LDFLAGS =
|
||||
mdb_export_SOURCES = mdb-export.c
|
||||
mdb_export_OBJECTS = mdb-export.o
|
||||
mdb_export_LDADD = $(LDADD)
|
||||
mdb_export_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_export_LDFLAGS =
|
||||
mdb_array_SOURCES = mdb-array.c
|
||||
mdb_array_OBJECTS = mdb-array.o
|
||||
mdb_array_LDADD = $(LDADD)
|
||||
mdb_array_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_array_LDFLAGS =
|
||||
mdb_schema_SOURCES = mdb-schema.c
|
||||
mdb_schema_OBJECTS = mdb-schema.o
|
||||
mdb_schema_LDADD = $(LDADD)
|
||||
mdb_schema_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_schema_LDFLAGS =
|
||||
mdb_tables_SOURCES = mdb-tables.c
|
||||
mdb_tables_OBJECTS = mdb-tables.o
|
||||
mdb_tables_LDADD = $(LDADD)
|
||||
mdb_tables_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_tables_LDFLAGS =
|
||||
mdb_parsecsv_SOURCES = mdb-parsecsv.c
|
||||
mdb_parsecsv_OBJECTS = mdb-parsecsv.o
|
||||
mdb_parsecsv_LDADD = $(LDADD)
|
||||
mdb_parsecsv_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_parsecsv_LDFLAGS =
|
||||
mdb_header_SOURCES = mdb-header.c
|
||||
mdb_header_OBJECTS = mdb-header.o
|
||||
mdb_header_LDADD = $(LDADD)
|
||||
mdb_header_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_header_LDFLAGS =
|
||||
prtable_SOURCES = prtable.c
|
||||
prtable_OBJECTS = prtable.o
|
||||
prtable_LDADD = $(LDADD)
|
||||
prtable_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prtable_LDFLAGS =
|
||||
prcat_SOURCES = prcat.c
|
||||
prcat_OBJECTS = prcat.o
|
||||
prcat_LDADD = $(LDADD)
|
||||
prcat_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prcat_LDFLAGS =
|
||||
prdata_SOURCES = prdata.c
|
||||
prdata_OBJECTS = prdata.o
|
||||
prdata_LDADD = $(LDADD)
|
||||
prdata_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prdata_LDFLAGS =
|
||||
prkkd_SOURCES = prkkd.c
|
||||
prkkd_OBJECTS = prkkd.o
|
||||
prkkd_LDADD = $(LDADD)
|
||||
prkkd_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prkkd_LDFLAGS =
|
||||
prdump_SOURCES = prdump.c
|
||||
prdump_OBJECTS = prdump.o
|
||||
prdump_LDADD = $(LDADD)
|
||||
prdump_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prdump_LDFLAGS =
|
||||
CFLAGS = -g -O2
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/mdb-array.P .deps/mdb-export.P .deps/mdb-header.P \
|
||||
.deps/mdb-parsecsv.P .deps/mdb-schema.P .deps/mdb-tables.P \
|
||||
.deps/prcat.P .deps/prdata.P .deps/prdump.P .deps/prkkd.P \
|
||||
.deps/prtable.P
|
||||
SOURCES = mdb-export.c mdb-array.c mdb-schema.c mdb-tables.c mdb-parsecsv.c mdb-header.c prtable.c prcat.c prdata.c prkkd.c prdump.c
|
||||
OBJECTS = mdb-export.o mdb-array.o mdb-schema.o mdb-tables.o mdb-parsecsv.o mdb-header.o prtable.o prcat.o prdata.o prkkd.o prdump.o
|
||||
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/util/Makefile
|
||||
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-export: $(mdb_export_OBJECTS) $(mdb_export_DEPENDENCIES)
|
||||
@rm -f mdb-export
|
||||
$(LINK) $(mdb_export_LDFLAGS) $(mdb_export_OBJECTS) $(mdb_export_LDADD) $(LIBS)
|
||||
|
||||
mdb-array: $(mdb_array_OBJECTS) $(mdb_array_DEPENDENCIES)
|
||||
@rm -f mdb-array
|
||||
$(LINK) $(mdb_array_LDFLAGS) $(mdb_array_OBJECTS) $(mdb_array_LDADD) $(LIBS)
|
||||
|
||||
mdb-schema: $(mdb_schema_OBJECTS) $(mdb_schema_DEPENDENCIES)
|
||||
@rm -f mdb-schema
|
||||
$(LINK) $(mdb_schema_LDFLAGS) $(mdb_schema_OBJECTS) $(mdb_schema_LDADD) $(LIBS)
|
||||
|
||||
mdb-tables: $(mdb_tables_OBJECTS) $(mdb_tables_DEPENDENCIES)
|
||||
@rm -f mdb-tables
|
||||
$(LINK) $(mdb_tables_LDFLAGS) $(mdb_tables_OBJECTS) $(mdb_tables_LDADD) $(LIBS)
|
||||
|
||||
mdb-parsecsv: $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_DEPENDENCIES)
|
||||
@rm -f mdb-parsecsv
|
||||
$(LINK) $(mdb_parsecsv_LDFLAGS) $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_LDADD) $(LIBS)
|
||||
|
||||
mdb-header: $(mdb_header_OBJECTS) $(mdb_header_DEPENDENCIES)
|
||||
@rm -f mdb-header
|
||||
$(LINK) $(mdb_header_LDFLAGS) $(mdb_header_OBJECTS) $(mdb_header_LDADD) $(LIBS)
|
||||
|
||||
prtable: $(prtable_OBJECTS) $(prtable_DEPENDENCIES)
|
||||
@rm -f prtable
|
||||
$(LINK) $(prtable_LDFLAGS) $(prtable_OBJECTS) $(prtable_LDADD) $(LIBS)
|
||||
|
||||
prcat: $(prcat_OBJECTS) $(prcat_DEPENDENCIES)
|
||||
@rm -f prcat
|
||||
$(LINK) $(prcat_LDFLAGS) $(prcat_OBJECTS) $(prcat_LDADD) $(LIBS)
|
||||
|
||||
prdata: $(prdata_OBJECTS) $(prdata_DEPENDENCIES)
|
||||
@rm -f prdata
|
||||
$(LINK) $(prdata_LDFLAGS) $(prdata_OBJECTS) $(prdata_LDADD) $(LIBS)
|
||||
|
||||
prkkd: $(prkkd_OBJECTS) $(prkkd_DEPENDENCIES)
|
||||
@rm -f prkkd
|
||||
$(LINK) $(prkkd_LDFLAGS) $(prkkd_OBJECTS) $(prkkd_LDADD) $(LIBS)
|
||||
|
||||
prdump: $(prdump_OBJECTS) $(prdump_DEPENDENCIES)
|
||||
@rm -f prdump
|
||||
$(LINK) $(prdump_LDFLAGS) $(prdump_OBJECTS) $(prdump_LDADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/util
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/util/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
4
src/util/Makefile.am
Normal file
4
src/util/Makefile.am
Normal file
@@ -0,0 +1,4 @@
|
||||
bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
@@ -1,100 +1,437 @@
|
||||
# Makefile.in generated automatically by automake 1.4 from Makefile.am
|
||||
|
||||
SHELL = /bin/sh
|
||||
VPATH = @srcdir@
|
||||
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
|
||||
SHELL = @SHELL@
|
||||
|
||||
top_srcdir = @top_srcdir@
|
||||
srcdir = @srcdir@
|
||||
top_srcdir = @top_srcdir@
|
||||
VPATH = @srcdir@
|
||||
prefix = @prefix@
|
||||
exec_prefix = @exec_prefix@
|
||||
bindir = $(exec_prefix)/bin
|
||||
infodir = $(exec_prefix)/info
|
||||
libdir = $(exec_prefix)/lib
|
||||
mandir = $(exec_prefix)/man/man1
|
||||
|
||||
bindir = @bindir@
|
||||
sbindir = @sbindir@
|
||||
libexecdir = @libexecdir@
|
||||
datadir = @datadir@
|
||||
sysconfdir = @sysconfdir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
localstatedir = @localstatedir@
|
||||
libdir = @libdir@
|
||||
infodir = @infodir@
|
||||
mandir = @mandir@
|
||||
includedir = @includedir@
|
||||
oldincludedir = /usr/include
|
||||
|
||||
DESTDIR =
|
||||
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
|
||||
top_builddir = ../..
|
||||
|
||||
ACLOCAL = @ACLOCAL@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
transform = @program_transform_name@
|
||||
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
host_alias = @host_alias@
|
||||
host_triplet = @host@
|
||||
AS = @AS@
|
||||
CC = @CC@
|
||||
DLLTOOL = @DLLTOOL@
|
||||
LD = @LD@
|
||||
LEX = @LEX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LN_S = @LN_S@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
NM = @NM@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
PACKAGE = @PACKAGE@
|
||||
RANLIB = @RANLIB@
|
||||
READLINE_LIBS = @READLINE_LIBS@
|
||||
VERSION = @VERSION@
|
||||
YACC = @YACC@
|
||||
|
||||
bin_PROGRAMS = mdb-export mdb-array mdb-schema mdb-tables mdb-parsecsv mdb-header prtable prcat prdata prkkd prdump
|
||||
INCLUDES = -I$(top_srcdir)/include `glib-config --cflags`
|
||||
LDADD = ../libmdb/libmdb.la
|
||||
LIBS = `glib-config --libs`
|
||||
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
|
||||
CONFIG_CLEAN_FILES =
|
||||
PROGRAMS = $(bin_PROGRAMS)
|
||||
|
||||
|
||||
DEFS = @DEFS@ -I. -I$(srcdir)
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
CFLAGS = $(CPPFLAG) @CFLAGS@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
LIBS = @LIBS@
|
||||
INSTALL= @INSTALL@
|
||||
INC = -I ../include `glib-config --cflags`
|
||||
MDBLIB = ../libmdb/libmdb.a
|
||||
LIBS = -L ../libmdb -lmdb `glib-config --libs`
|
||||
PROGS = prcat prkkd prtable prdata prdump mdb-schema mdb-export mdb-tables mdb-header mdb-parsecsv mdb-array
|
||||
PRCATOBJS = prcat.o
|
||||
PRKKDOBJS = prkkd.o
|
||||
PRTABLEOBJS = prtable.o
|
||||
PRDATAOBJS = prdata.o
|
||||
PRDUMPOBJS = prdump.o
|
||||
SCHEMAOBJS = schema.o
|
||||
EXPORTOBJS = mdb-export.o
|
||||
HEADEROBJS = header.o
|
||||
TABLEOBJS = tables.o
|
||||
CSVOBJS = parsecsv.o
|
||||
ARROBJS = mdb-array.o
|
||||
mdb_export_SOURCES = mdb-export.c
|
||||
mdb_export_OBJECTS = mdb-export.o
|
||||
mdb_export_LDADD = $(LDADD)
|
||||
mdb_export_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_export_LDFLAGS =
|
||||
mdb_array_SOURCES = mdb-array.c
|
||||
mdb_array_OBJECTS = mdb-array.o
|
||||
mdb_array_LDADD = $(LDADD)
|
||||
mdb_array_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_array_LDFLAGS =
|
||||
mdb_schema_SOURCES = mdb-schema.c
|
||||
mdb_schema_OBJECTS = mdb-schema.o
|
||||
mdb_schema_LDADD = $(LDADD)
|
||||
mdb_schema_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_schema_LDFLAGS =
|
||||
mdb_tables_SOURCES = mdb-tables.c
|
||||
mdb_tables_OBJECTS = mdb-tables.o
|
||||
mdb_tables_LDADD = $(LDADD)
|
||||
mdb_tables_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_tables_LDFLAGS =
|
||||
mdb_parsecsv_SOURCES = mdb-parsecsv.c
|
||||
mdb_parsecsv_OBJECTS = mdb-parsecsv.o
|
||||
mdb_parsecsv_LDADD = $(LDADD)
|
||||
mdb_parsecsv_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_parsecsv_LDFLAGS =
|
||||
mdb_header_SOURCES = mdb-header.c
|
||||
mdb_header_OBJECTS = mdb-header.o
|
||||
mdb_header_LDADD = $(LDADD)
|
||||
mdb_header_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
mdb_header_LDFLAGS =
|
||||
prtable_SOURCES = prtable.c
|
||||
prtable_OBJECTS = prtable.o
|
||||
prtable_LDADD = $(LDADD)
|
||||
prtable_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prtable_LDFLAGS =
|
||||
prcat_SOURCES = prcat.c
|
||||
prcat_OBJECTS = prcat.o
|
||||
prcat_LDADD = $(LDADD)
|
||||
prcat_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prcat_LDFLAGS =
|
||||
prdata_SOURCES = prdata.c
|
||||
prdata_OBJECTS = prdata.o
|
||||
prdata_LDADD = $(LDADD)
|
||||
prdata_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prdata_LDFLAGS =
|
||||
prkkd_SOURCES = prkkd.c
|
||||
prkkd_OBJECTS = prkkd.o
|
||||
prkkd_LDADD = $(LDADD)
|
||||
prkkd_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prkkd_LDFLAGS =
|
||||
prdump_SOURCES = prdump.c
|
||||
prdump_OBJECTS = prdump.o
|
||||
prdump_LDADD = $(LDADD)
|
||||
prdump_DEPENDENCIES = ../libmdb/libmdb.la
|
||||
prdump_LDFLAGS =
|
||||
CFLAGS = @CFLAGS@
|
||||
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
|
||||
CCLD = $(CC)
|
||||
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
|
||||
DIST_COMMON = Makefile.am Makefile.in
|
||||
|
||||
all: $(PROGS)
|
||||
|
||||
prcat: $(PRCATOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(PRCATOBJS) $(LIBS)
|
||||
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
|
||||
|
||||
prkkd: $(PRKKDOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(PRKKDOBJS) $(LIBS)
|
||||
TAR = gtar
|
||||
GZIP_ENV = --best
|
||||
DEP_FILES = .deps/mdb-array.P .deps/mdb-export.P .deps/mdb-header.P \
|
||||
.deps/mdb-parsecsv.P .deps/mdb-schema.P .deps/mdb-tables.P \
|
||||
.deps/prcat.P .deps/prdata.P .deps/prdump.P .deps/prkkd.P \
|
||||
.deps/prtable.P
|
||||
SOURCES = mdb-export.c mdb-array.c mdb-schema.c mdb-tables.c mdb-parsecsv.c mdb-header.c prtable.c prcat.c prdata.c prkkd.c prdump.c
|
||||
OBJECTS = mdb-export.o mdb-array.o mdb-schema.o mdb-tables.o mdb-parsecsv.o mdb-header.o prtable.o prcat.o prdata.o prkkd.o prdump.o
|
||||
|
||||
prtable: $(PRTABLEOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(PRTABLEOBJS) $(LIBS)
|
||||
all: all-redirect
|
||||
.SUFFIXES:
|
||||
.SUFFIXES: .S .c .lo .o .s
|
||||
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
|
||||
cd $(top_srcdir) && $(AUTOMAKE) --gnu src/util/Makefile
|
||||
|
||||
prdata: $(PRDATAOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(PRDATAOBJS) $(LIBS)
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
|
||||
cd $(top_builddir) \
|
||||
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
|
||||
|
||||
prdump: $(PRDUMPOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(PRDUMPOBJS) $(LIBS)
|
||||
|
||||
mdb-schema: $(SCHEMAOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(SCHEMAOBJS) $(LIBS)
|
||||
mostlyclean-binPROGRAMS:
|
||||
|
||||
mdb-export: $(EXPORTOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(EXPORTOBJS) $(LIBS)
|
||||
clean-binPROGRAMS:
|
||||
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
|
||||
|
||||
mdb-tables: $(TABLEOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(TABLEOBJS) $(LIBS)
|
||||
distclean-binPROGRAMS:
|
||||
|
||||
mdb-header: $(HEADEROBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(HEADEROBJS) $(LIBS)
|
||||
maintainer-clean-binPROGRAMS:
|
||||
|
||||
mdb-parsecsv: $(CSVOBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(CSVOBJS) $(LIBS)
|
||||
|
||||
mdb-array: $(ARROBJS) $(MDBLIB)
|
||||
$(CC) -g -o $@ $(ARROBJS) $(LIBS)
|
||||
|
||||
clean:
|
||||
rm -f core *.o $(PROGS)
|
||||
|
||||
.c.o:
|
||||
$(CC) $(CFLAGS) -g -c $< $(INC)
|
||||
|
||||
install:
|
||||
@for prog in $(PROGS); do \
|
||||
echo " copying $$prog to $(bindir)"; \
|
||||
cp $$prog $(bindir); \
|
||||
install-binPROGRAMS: $(bin_PROGRAMS)
|
||||
@$(NORMAL_INSTALL)
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
@list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
if test -f $$p; then \
|
||||
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
||||
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
else :; fi; \
|
||||
done
|
||||
|
||||
uninstall:
|
||||
@for prog in $(PROGS); do \
|
||||
echo " removing $$prog from $(bindir)"; \
|
||||
rm -f $(bindir)/$$prog; \
|
||||
uninstall-binPROGRAMS:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
list='$(bin_PROGRAMS)'; for p in $$list; do \
|
||||
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
||||
done
|
||||
|
||||
header.o: header.c ../include/mdbtools.h
|
||||
mdb-array.o: mdb-array.c ../include/mdbtools.h
|
||||
mdb-export.o: mdb-export.c ../include/mdbtools.h
|
||||
parsecsv.o: parsecsv.c ../include/mdbtools.h
|
||||
prcat.o: prcat.c ../include/mdbtools.h
|
||||
prdata.o: prdata.c ../include/mdbtools.h
|
||||
prdump.o: prdump.c ../include/mdbtools.h
|
||||
prkkd.o: prkkd.c ../include/mdbtools.h
|
||||
prtable.o: prtable.c ../include/mdbtools.h
|
||||
schema.o: schema.c ../include/mdbtools.h
|
||||
tables.o: tables.c ../include/mdbtools.h
|
||||
.s.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
.S.o:
|
||||
$(COMPILE) -c $<
|
||||
|
||||
mostlyclean-compile:
|
||||
-rm -f *.o core *.core
|
||||
|
||||
clean-compile:
|
||||
|
||||
distclean-compile:
|
||||
-rm -f *.tab.c
|
||||
|
||||
maintainer-clean-compile:
|
||||
|
||||
.s.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
.S.lo:
|
||||
$(LIBTOOL) --mode=compile $(COMPILE) -c $<
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
|
||||
distclean-libtool:
|
||||
|
||||
maintainer-clean-libtool:
|
||||
|
||||
mdb-export: $(mdb_export_OBJECTS) $(mdb_export_DEPENDENCIES)
|
||||
@rm -f mdb-export
|
||||
$(LINK) $(mdb_export_LDFLAGS) $(mdb_export_OBJECTS) $(mdb_export_LDADD) $(LIBS)
|
||||
|
||||
mdb-array: $(mdb_array_OBJECTS) $(mdb_array_DEPENDENCIES)
|
||||
@rm -f mdb-array
|
||||
$(LINK) $(mdb_array_LDFLAGS) $(mdb_array_OBJECTS) $(mdb_array_LDADD) $(LIBS)
|
||||
|
||||
mdb-schema: $(mdb_schema_OBJECTS) $(mdb_schema_DEPENDENCIES)
|
||||
@rm -f mdb-schema
|
||||
$(LINK) $(mdb_schema_LDFLAGS) $(mdb_schema_OBJECTS) $(mdb_schema_LDADD) $(LIBS)
|
||||
|
||||
mdb-tables: $(mdb_tables_OBJECTS) $(mdb_tables_DEPENDENCIES)
|
||||
@rm -f mdb-tables
|
||||
$(LINK) $(mdb_tables_LDFLAGS) $(mdb_tables_OBJECTS) $(mdb_tables_LDADD) $(LIBS)
|
||||
|
||||
mdb-parsecsv: $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_DEPENDENCIES)
|
||||
@rm -f mdb-parsecsv
|
||||
$(LINK) $(mdb_parsecsv_LDFLAGS) $(mdb_parsecsv_OBJECTS) $(mdb_parsecsv_LDADD) $(LIBS)
|
||||
|
||||
mdb-header: $(mdb_header_OBJECTS) $(mdb_header_DEPENDENCIES)
|
||||
@rm -f mdb-header
|
||||
$(LINK) $(mdb_header_LDFLAGS) $(mdb_header_OBJECTS) $(mdb_header_LDADD) $(LIBS)
|
||||
|
||||
prtable: $(prtable_OBJECTS) $(prtable_DEPENDENCIES)
|
||||
@rm -f prtable
|
||||
$(LINK) $(prtable_LDFLAGS) $(prtable_OBJECTS) $(prtable_LDADD) $(LIBS)
|
||||
|
||||
prcat: $(prcat_OBJECTS) $(prcat_DEPENDENCIES)
|
||||
@rm -f prcat
|
||||
$(LINK) $(prcat_LDFLAGS) $(prcat_OBJECTS) $(prcat_LDADD) $(LIBS)
|
||||
|
||||
prdata: $(prdata_OBJECTS) $(prdata_DEPENDENCIES)
|
||||
@rm -f prdata
|
||||
$(LINK) $(prdata_LDFLAGS) $(prdata_OBJECTS) $(prdata_LDADD) $(LIBS)
|
||||
|
||||
prkkd: $(prkkd_OBJECTS) $(prkkd_DEPENDENCIES)
|
||||
@rm -f prkkd
|
||||
$(LINK) $(prkkd_LDFLAGS) $(prkkd_OBJECTS) $(prkkd_LDADD) $(LIBS)
|
||||
|
||||
prdump: $(prdump_OBJECTS) $(prdump_DEPENDENCIES)
|
||||
@rm -f prdump
|
||||
$(LINK) $(prdump_LDFLAGS) $(prdump_OBJECTS) $(prdump_LDADD) $(LIBS)
|
||||
|
||||
tags: TAGS
|
||||
|
||||
ID: $(HEADERS) $(SOURCES) $(LISP)
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
here=`pwd` && cd $(srcdir) \
|
||||
&& mkid -f$$here/ID $$unique $(LISP)
|
||||
|
||||
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
|
||||
tags=; \
|
||||
here=`pwd`; \
|
||||
list='$(SOURCES) $(HEADERS)'; \
|
||||
unique=`for i in $$list; do echo $$i; done | \
|
||||
awk ' { files[$$0] = 1; } \
|
||||
END { for (i in files) print i; }'`; \
|
||||
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|
||||
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
|
||||
|
||||
mostlyclean-tags:
|
||||
|
||||
clean-tags:
|
||||
|
||||
distclean-tags:
|
||||
-rm -f TAGS ID
|
||||
|
||||
maintainer-clean-tags:
|
||||
|
||||
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|
||||
|
||||
subdir = src/util
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
here=`cd $(top_builddir) && pwd`; \
|
||||
top_distdir=`cd $(top_distdir) && pwd`; \
|
||||
distdir=`cd $(distdir) && pwd`; \
|
||||
cd $(top_srcdir) \
|
||||
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/util/Makefile
|
||||
@for file in $(DISTFILES); do \
|
||||
d=$(srcdir); \
|
||||
if test -d $$d/$$file; then \
|
||||
cp -pr $$d/$$file $(distdir)/$$file; \
|
||||
else \
|
||||
test -f $(distdir)/$$file \
|
||||
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|
||||
|| cp -p $$d/$$file $(distdir)/$$file || :; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
|
||||
|
||||
-include $(DEP_FILES)
|
||||
|
||||
mostlyclean-depend:
|
||||
|
||||
clean-depend:
|
||||
|
||||
distclean-depend:
|
||||
-rm -rf .deps
|
||||
|
||||
maintainer-clean-depend:
|
||||
|
||||
%.o: %.c
|
||||
@echo '$(COMPILE) -c $<'; \
|
||||
$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-cp .deps/$(*F).pp .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm .deps/$(*F).pp
|
||||
|
||||
%.lo: %.c
|
||||
@echo '$(LTCOMPILE) -c $<'; \
|
||||
$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
|
||||
@-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
|
||||
< .deps/$(*F).pp > .deps/$(*F).P; \
|
||||
tr ' ' '\012' < .deps/$(*F).pp \
|
||||
| sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
|
||||
>> .deps/$(*F).P; \
|
||||
rm -f .deps/$(*F).pp
|
||||
info-am:
|
||||
info: info-am
|
||||
dvi-am:
|
||||
dvi: dvi-am
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
installcheck-am:
|
||||
installcheck: installcheck-am
|
||||
install-exec-am: install-binPROGRAMS
|
||||
install-exec: install-exec-am
|
||||
|
||||
install-data-am:
|
||||
install-data: install-data-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
install: install-am
|
||||
uninstall-am: uninstall-binPROGRAMS
|
||||
uninstall: uninstall-am
|
||||
all-am: Makefile $(PROGRAMS)
|
||||
all-redirect: all-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
|
||||
installdirs:
|
||||
$(mkinstalldirs) $(DESTDIR)$(bindir)
|
||||
|
||||
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-rm -f Makefile $(CONFIG_CLEAN_FILES)
|
||||
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
|
||||
|
||||
maintainer-clean-generic:
|
||||
mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
|
||||
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
|
||||
mostlyclean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
|
||||
clean-depend clean-generic mostlyclean-am
|
||||
|
||||
clean: clean-am
|
||||
|
||||
distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
|
||||
distclean-tags distclean-depend distclean-generic \
|
||||
clean-am
|
||||
-rm -f libtool
|
||||
|
||||
distclean: distclean-am
|
||||
|
||||
maintainer-clean-am: maintainer-clean-binPROGRAMS \
|
||||
maintainer-clean-compile maintainer-clean-libtool \
|
||||
maintainer-clean-tags maintainer-clean-depend \
|
||||
maintainer-clean-generic distclean-am
|
||||
@echo "This command is intended for maintainers to use;"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
|
||||
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
|
||||
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
|
||||
mostlyclean-compile distclean-compile clean-compile \
|
||||
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
|
||||
clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
|
||||
distclean-tags clean-tags maintainer-clean-tags distdir \
|
||||
mostlyclean-depend distclean-depend clean-depend \
|
||||
maintainer-clean-depend info-am info dvi-am dvi check check-am \
|
||||
installcheck-am installcheck install-exec-am install-exec \
|
||||
install-data-am install-data install-am install uninstall-am uninstall \
|
||||
all-redirect all-am all installdirs mostlyclean-generic \
|
||||
distclean-generic clean-generic maintainer-clean-generic clean \
|
||||
mostlyclean distclean maintainer-clean
|
||||
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
|
||||
104
src/util/sargtest.c
Normal file
104
src/util/sargtest.c
Normal file
@@ -0,0 +1,104 @@
|
||||
/* MDB Tools - A library for reading MS Access database file
|
||||
* Copyright (C) 2000 Brian Bruns
|
||||
*
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Library General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Library General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Library General Public
|
||||
* License along with this library; if not, write to the
|
||||
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
||||
* Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
|
||||
#include "mdbtools.h"
|
||||
|
||||
#define TABLE_NAME "Orders"
|
||||
#define MDB_FILE "Northwind.mdb"
|
||||
#define DELIMETER "\t"
|
||||
|
||||
void print_table(MdbTableDef *table);
|
||||
|
||||
main(int argc, char **argv)
|
||||
{
|
||||
int rows;
|
||||
int i;
|
||||
unsigned char buf[2048];
|
||||
MdbHandle *mdb;
|
||||
MdbCatalogEntry entry;
|
||||
MdbTableDef *table;
|
||||
|
||||
mdb_init();
|
||||
|
||||
if (!(mdb = mdb_open(MDB_FILE))) {
|
||||
exit(1);
|
||||
}
|
||||
|
||||
mdb_read_catalog(mdb, MDB_TABLE);
|
||||
|
||||
for (i=0;i<mdb->num_catalog;i++) {
|
||||
entry = g_array_index(mdb->catalog,MdbCatalogEntry,i);
|
||||
if (entry.object_type == MDB_TABLE &&
|
||||
!strcmp(entry.object_name,TABLE_NAME)) {
|
||||
table = mdb_read_table(&entry);
|
||||
print_table(table);
|
||||
}
|
||||
}
|
||||
|
||||
mdb_free_handle(mdb);
|
||||
mdb_exit();
|
||||
}
|
||||
|
||||
void print_table(MdbTableDef *table)
|
||||
{
|
||||
int j;
|
||||
/* doesn't handle tables > 256 columns. Can that happen? */
|
||||
char *bound_values[256];
|
||||
MdbColumn *col;
|
||||
MdbSarg sarg;
|
||||
|
||||
mdb_read_columns(table);
|
||||
|
||||
sarg.op = MDB_GTEQ;
|
||||
sarg.value.i = 11070;
|
||||
mdb_add_sarg_by_name(table, "OrderID", &sarg);
|
||||
|
||||
mdb_rewind_table(table);
|
||||
|
||||
for (j=0;j<table->num_cols;j++) {
|
||||
bound_values[j] = (char *) malloc(MDB_BIND_SIZE);
|
||||
bound_values[j][0] = '\0';
|
||||
mdb_bind_column(table, j+1, bound_values[j]);
|
||||
}
|
||||
|
||||
/* print header */
|
||||
col=g_ptr_array_index(table->columns,0);
|
||||
fprintf(stdout,"%s",col->name);
|
||||
for (j=1;j<table->num_cols;j++) {
|
||||
col=g_ptr_array_index(table->columns,j);
|
||||
fprintf(stdout,"%s%s",DELIMETER,col->name);
|
||||
}
|
||||
fprintf(stdout,"\n");
|
||||
|
||||
/* print each row */
|
||||
while(mdb_fetch_row(table)) {
|
||||
fprintf(stdout,"%s",bound_values[0]);
|
||||
for (j=1;j<table->num_cols;j++) {
|
||||
col=g_ptr_array_index(table->columns,j);
|
||||
fprintf(stdout,"%s%s",DELIMETER,bound_values[j]);
|
||||
}
|
||||
fprintf(stdout,"\n");
|
||||
}
|
||||
|
||||
/* clean up */
|
||||
for (j=0;j<table->num_cols;j++) {
|
||||
free(bound_values[j]);
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user